Maintenance Products

Adhesive Softener - Bob Smith Industries, Un-Cure
Un-Cure™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of Un-Cure™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastic parts with a razor saw is usually the best option. Works Well On:
  • Cyanoacrylates
  • Super Glues

Directions: Un-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water.
Please Log In to view prices
Adhesive Remover - Bob Smith Industries, Insta-Clean
Insta-Clean™ is ideal for removing price stickers and their adhesive residue. Insta-Clean™ will also remove scuff marks that regular household cleaners won't touch. Works on all surfaces, including: glass, cardboard, plastic, fiberglass and everything else. Uses
  • Stickers
  • Sticker Residue
  • Residue on Glass
  • Residue on Fiberglass

Directions: Spray directly onto the sticker to be removed. Let stand for 1 to 5 minutes and then peel off sticker and wipe clean.
Please Log In to view prices
Epoxy - Bob Smith Industries, Quik-Cure
Quik-Cure™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. Quik-Cure™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. Quik-Cure™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with Quik-Cure™ can be handled after 15 minutes. Full strength is reached in 1 hour. Works Best On:
  • Hard Wood
  • Glass & Metal

Works Well On:
  • Balsa Wood
  • Soft Wood
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • White Foam
  • Reinforcing

Directions: Quik-Cure™ 5 min.
Please Log In to view prices
Adhesive - Krylon, 9090, High Strength Spray Adhesive, 11 oz
Krylon 9090 high strength spray adhesive. This fast-acting adhesive has a variable volume controlled web spray pattern that offers high contact strength.
  • Superior, permanent bond
  • High contact strength
  • Bonds heavy-duty materials like wood, metal, plastic, glass, laminate and more
  • Dries in 30 minutes

For use on: Wood, Metal, Plastic, Glass, Paper, Papier-mâché, Plaster, Ceramic Application conditions: Best results when temperatures are 55° F to 75°F and humidity is below 60%. Applying outside this range may impact finish Indoor/outdoor: Interior/Exterior
Please Log In to view prices
Brush - Befaco, Gear Duster
Gear duster from Befaco. The Befaco Synth Duster is a great tool for getting dust off of faceplates and other hard to reach spots on your equipment. The super soft bristles can gently clean around pots, jacks, and other hardware.
Please Log In to view prices
Container - for mixing and measuring, 1 Quart
1 quart mixing container. Quickly measure and mix paints, chemicals and adhesives. Clearly marked graduations for quick measuring. Made of translucent high-density polyethylene. Optional lid S-TMIX-1-LID (sold separately) seals the container and prevents spills.
Please Log In to view prices
Lid - For 1 Quart Mixing Container
Lid for 1 quart mixing container. Seals container and prevents spills. High-density polyethylene. Use with S-TMIX-1 (sold separately).
Please Log In to view prices
Tool - Potentiometer Cleaning Cap, Aluminum
Potentiometer cleaning caps for use with aerosol cleaners such as DeoxIT. This is a great tool for difficult to clean potentiometers such as those on hollow body guitars and certain amp chassis. The design pushes the spray in through the bushing of the potentiometer removing the need to access the back of the potentiometer. To use: Remove the knob and thread the cleaning cap onto the potentiometer. If there is enough bushing, attach the rubber o-ring first. If not, simply thread the cleaning cap onto the bushing and place a rag around it. Using a rag is recommended with and without the o-ring. Insert the DeoxIT straw into the small hole on the side of the cleaning cap. Cover the open end with your finger and spray. The cleaning solution is directed to the shaft of the pot where it can seep in. You can turn split shaft pots with a screwdriver through the open end to help move the cleaner around inside the pot.
Please Log In to view prices
Container - Jar, Clear Round Mouth, White Cap, 2 oz
2 oz clear jar with a white cap. Instant identification for your parts, liquids or dry goods. Super wide mouth for easy filling.
  • Durable polystyrene jars.
  • FDA compliant.
  • Caps included.
Please Log In to view prices