Maintenance Products

100% DeoxIT® Fader F100L liquid in a 25 mL needle dispenser bottle for precision application. F100L is a moving contact lubricant for conductive plastic faders and controls. It contains no solvents. DeoxIT® Fader F-Series is a precision lubricant and cleaner for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions. Over time these conductive plastic components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, drink spills and other contamination also degrade the components’ lubricant. The need for re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces. Another use for DeoxIT® Fader is on conductive membrane switches and components.

This product is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.

DeoxIT® Fader FN5 is a non-flammable precision lubricant and cleaner for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions. FN5 lubricates and protects plastic to plastic and plastic to metal surfaces.

DeoxIT® FaderGrease was specifically formulated to improve conductivity and lubricate conductive plastic and carbon compound faders, switches and other mechanisms with sliding surfaces. Provides clearer audio, clearer video, and reliable data. Over time these components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, smoke, drink spills and other contamination also degrade the components' lubricant. Re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces. 28 grams

Simply clean the contacts with a drop of DeoxIT® and extend the life of batteries!

• Dissolves oxidation & corrosion
• Longer battery & device life
• Revives your electronics
• Safe and easy to use

DeoxIT® GOLD G100L (formerly ProGold), 7.4mL Bottle with Brush Applicator, 100% solution.

• Cleaner Audio
  
• Cleaner Video
  
• Reliable Data
  
• Improve your:
  
  • USB
    
  • Firewire
    
  • HDMI/DVI
    
  • RCA
    
  • BNC
    
  • SCSI
    
  • Ethernet
    
  • S-Video
    
  • Component Video
    
  • HDTV Connections
    
  • ¼" Input Jacks
    

Chemically improves ALL metal to metal connections and contacts for clearer audio, clearer video, and reliable data. Includes: DeoxIT® brush applicator (#D100L-2DB), (Applications = 500 ± brush strokes, 10mm long) DeoxIT® GOLD brush applicator (#G100L-2DB), (Applications = 500 ± brush strokes, 10mm long) Lint-free swabs, brushes and cloths

Unique contact cleaner, conditioner, enhancer, lubricant and protectant for PLATED metal surfaces. Improves conductivity, maintains optimum signal quality, reduces fretting & dendrite corrosion, and stabilizes connections between similar and dissimilar metals. DeoxIT® GOLD also reduces wear and abrasion, arcing, RFI and intermittent connections and improves connector performance/reliability. Ideal for gold plated surfaces. On oxidized surfaces,pre-treat with DeoxIT® contact cleaner.

DeoxIT® GOLD GN5 Spray (formerly ProGold), 5% solution, 163 g, non-flammable, quick dry - non drip, and safe on plastics! Cannot ship by Air or Mail. Must ship UPS ground.

DeoxIT® GOLD Wipes (formerly ProGold), 100%, 25 individual wipes, clamshell.

Applicator: Pen, provides NO flushing action, applies 100% DeoxIT® Gold.
Formulation: 100% DeoxIT® Gold.
Use: When contact and connector are easily accessible. No flushing action.
First Time Use: Depress tip on a surface for a minute or two until liquid flows. Pull out tip and reverse to speed up activating.
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection.

DeoxIT® GOLD G100L (formerly ProGold), Squeeze Tube, 100% solution, 2 mL, (Applications = 50 ± drops, 0.04 ml/drop)

DeoxIT® GOLD (formerly ProGold), is a unique conditioning solution that improves conductivity and provides long-lasting protection on gold, base metals and other precious metal contacts and connections (gold, silver, rhodium, copper, bronze, nickel, etc.).Use on plated connectors, contacts and metal surfaces for maximum performance and protection. Recommended for critical applications where only slight cleaning action is necessary. If the surface looks clean, applying DeoxIT® contact cleaner first is usually not necessary. DeoxIT® GOLD is designed to dissolve small amounts of oxidation.

Protects and lubricates electronic connections. Ideal for severe environments; humidity, salts, pllutants, sulfer, etc. Safe on plastics.

• Cleaner Audio
• Clearer Video
• Reliable Data

Quik-Cure™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. Quik-Cure™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. Quik-Cure™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with Quik-Cure™ can be handled after 15 minutes. Full strength is reached in 1 hour. Works Best On:

• Hard Wood
• Glass & Metal

Works Well On:

• Balsa Wood
• Soft Wood
• Fiberglass
• Ceramics
• Hard Plastics
• White Foam
• Reinforcing

Directions: Quik-Cure™ 5 min.

Now you can get into all the hard to reach places with the new CAIG FLEX-TIP™ - Extension Tube for Perfect-Straw™.

• Reduces straw diameter at tip
• Reduces flow
• Flexible - Get to Hard to reach places (1.5" length)
• Fits ALL Perfect-Straw™ Tubes
• Chemically resistant tube

Caig Flux Wash cleans and removes fluxes, light oils, and silicon.

• Safe on most plastics
• Evaporates quickly
• Removes wax and grease

Val-U Series Spray, adjustable valve, 5.5 oz.

Make your fretboard happy!
Keep fretboards clean and avoid cracking and drying by conditioning them with Dunlop Fretboard 65 Ultimate Lemon Oil.
Dunlop Fretboard 65 Ultimate Lemon Oil will remove grime and return your fretboard to it’s original luster quickly and easily. And once the dirt and grime are gone Fretboard 65 will keep it away by providing an invisible sealant against stains and moisture.
*Note* - Not for use on maple fretboards.

• Protects your fretboard from cracking and drying
• Moisturizes your fretboard
• Removes dirt, grime, and grease
• 4 oz. bottle

Removes dirt and stains and slows oxidation of frets. Protects against drying and cracking by moisturizing and conditioning to preserve fret board life. Use Lizard Spit Guitar Polish for finished surfaces.

Formula No. 65 Polish and Cleaner with a microfiber cloth! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand . And while you’re at it why not grab a nice microfiber cleaning cloth to go along with it? Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use. Includes:

• (1) 4 oz. bottle of Dunlop Formula No. 65
• (1) microfiber cleaning cloth

Get rid of the gunk! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand! Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use.

• 4 oz. spray bottle
• Polishes and protects
• Will not build up

Type Z9, 1 fluid ounce. Silicone base, extra high-efficiency heat transfer. Made in USA. For mounting transistors, diodes, rectifiers, and resistors. Thermal joint compound for any device where efficient cooling is desired.

• For effective transfer of heat between components & heat sinks
• Will not dry or harden
• White paste

Grease-like consistency; opaque white in color; zero bleed; very stable at elevated temperatures; excellent thermal resistance and high thermal conductivity; efficient thermal coupler; effective and positive heat sink sealers and heat transfer agent. The product offers high thermal conductivity, virtually no bleed or evaporation over a wide operating temperature range. It will not harden, dry out or melt after 1,000 hours at 200°C. Meets Mil-C-47009 and Mil-C-47113.

Lid for 1 quart mixing container. Seals container and prevents spills. High-density polyethylene. Use with S-TMIX-1 (sold separately).

Heavy black coating used as insulating tape in applications where tape cannot be used.
Insulating Coating is an air-dry, synthetic rubber coating that can be easily applied by spraying, brushing, or dipping. Insulating Coating resists moistures, acids, abrasion, weathering, electrical shock, skidding/slipping, and corrosion. Coats give a comfortable, controlled, color-coded grip to all types of tools, lawn and garden, mechanical, electrical, woodworking, masonry.

• Covers 30 square feet per gallon at 15 mils
• Cured temperature use range -30 to 200F
• Tensile strength: 3,7540 psi
• Dielectric Strength: 1,400 V/Mil