Maintenance Products

Adhesive - Bob Smith Industries, Insta-Cure Gap Filling
Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must have for luthiers! Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps or the parts to be glued don’t fit perfectly. Medium viscosity super glue is the most common glue used in many luthiery applications due to it’s cure time and viscosity. Recommended for binding repair and small poly finish touch ups. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. To speed up curing time use the Insta-Set accelerator!
Please Log In to view prices
DeoxIT® Gold - Caig, Electronic Maintenance Kit
Special Order Item
Chemically improves ALL metal to metal connections and contacts for clearer audio, clearer video, and reliable data. Includes: DeoxIT® brush applicator (#D100L-2DB), (Applications = 500 ± brush strokes, 10mm long) DeoxIT® GOLD brush applicator (#G100L-2DB), (Applications = 500 ± brush strokes, 10mm long) Lint-free swabs, brushes and cloths
package of 2
Please Log In to view prices
Epoxy - Bob Smith Industries, Quik-Cure
Quik-Cure™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. Quik-Cure™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. Quik-Cure™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with Quik-Cure™ can be handled after 15 minutes. Full strength is reached in 1 hour. Works Best On:
  • Hard Wood
  • Glass & Metal

Works Well On:
  • Balsa Wood
  • Soft Wood
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • White Foam
  • Reinforcing

Directions: Quik-Cure™ 5 min.
Please Log In to view prices
DeoxIT® - Caig, D5 pump spray can, 25%
DeoxIt Pump Spray 25% concentrate solution. Non-flammable. 150ml. May be shipped by air to US and other countries. DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion. DeoxIT® D5 is safe on plastics.
Please Log In to view prices
Superlube Gel Pen - Dunlop, System 65
Keep everything moving smoothly on your guitar with the Superlube Gel Pen. A flexible spatula tip helps to control where the lube goes for an easy application. Be it saddles, nut slots, tremolo parts, or elsewhere, this lubricant is safe for all stringed instrument maintenance.
Please Log In to view prices
Cleaner - Rubber Revitalizer, 1 oz, for restoration / protection
Cleans and revitalizes rubber, prolonging life and restoring function.
  • Prolongs life of rubber parts
  • Deglazes hardened rubber hoses, drive wheels and belts.
  • Revitalizes rubber by removing buildup
  • Restores the "gripping" surface
  • Cleans and makes surfaces like new
Please Log In to view prices
Adhesive - Bob Smith Industries, Insta-Set Foam, Pump Spray
Bob Smith Industries INSTA-SET™ CA (super glue) Accelerator. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
  • Convenient pump spray (2oz.
Please Log In to view prices
DeoxIT® - Caig, L260NP Grease (Formerly Cailube) Squeeze Tube
CAIG’s DeoxIT® L260 Grease is a lithium grease with unique additives to enable it to adhere and stay on the surfaces it is applied to. It has a tenacity to stick to surfaces. Additional additives allow it to displace moisture, prevent oxidation and corrosion and provides superior lubrication and protection. DeoxIT® L260 Grease’s unique properties allow it not only to be used on mechanical devices – also electrical devices and equipment; such as high powered switches, disconnects, connectors, relays and exposed connections in severe environments.
Please Log In to view prices
Threadlocker - Bob Smith Industries, IC-LOC Green
IC-LOC™ Green is a thin, medium-high strength threadlock that is applied to fasteners that are already assembled. IC-LOC™ Green wicks down into the threads of fasteners using capillary action and has good performance even with oil coated fasteners. Uses
  • Threads of fasteners
  • Bolts
  • Screws
  • Nuts

Directions: Shake well. Unscrew cap and cut off tip. Apply IC-LOC™ Green to clean preassembled fasteners. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Green prevents the loosening of threaded fasteners from shock and vibration by wicking into threads. Cured temperature range is -60° to +300°F (-51° to +149°C). Locked fasteners are only removable by localized heating and hand tools. Remove residue with a damp cloth. Similar to Loctite Green.
Please Log In to view prices
DeoxIT® Fader - Caig, Liquid squeeze tube
DeoxIT® cleaner and lubricant for conductive plastic faders and controls. Improves conductivity, maintains optimum signal quality, reduces wear and improves tactile feel - flushing action, safe on plastics. 2mL Squeeze Tube
Please Log In to view prices
DeoxIT® Fader FN5 - Caig, Mini Spray, 5%, 40g
DeoxIT® Fader FN5 is a non-flammable precision lubricant and cleaner for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions. FN5 lubricates and protects plastic to plastic and plastic to metal surfaces.
Please Log In to view prices
Corona Dope - GC Electronics, lacquer coating, 2 oz.
Corona Dope is useful for insulating components, circuits and assemblies. It has high dielectric strength and is especially useful where high voltages are involved. Also has excellent arc and corona resisting properties and protects surfaces against moisture. Cures in 20 minutes at room temperature. GC Electronics Corona Dope is commonly used to reseal flyback transformers and other parts on CRT monitors and displays.
  • Color: Black
  • Specific Gravity: 0.9
  • Dielectric Strength: 3800 V/Mil
  • Softening Point: 180°C to 190°C
  • Temperature Range: Up to 340°F
  • Viscosity @ 25°C: 220 cps
Please Log In to view prices
Guitar Polish - Dunlop, Formula 65 polish and cleaner
Get rid of the gunk! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand! Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use.
  • 4 oz. spray bottle
  • Polishes and protects
  • Will not build up
Please Log In to view prices
Polish mate - Novus, cloths for polishing
Novus Plastic Polish Mates offer cloth-like softness in a disposable wiper. These wipers are highly absorbent, abrasion-resistant, low lint and extra durable. Package of 6 Mates. Using the wrong cloth when cleaning plastics can damage the surface. Standard paper toweling, polyester or rayon cloths can leave scratches in plastic. Alleviate this problem by using only NOVUS Plastic Polish Mates for all your plastic cleaning jobs. For best results, use with Novus Plastic Polishes No.1, No. 2, and No. 3
package of 6
Please Log In to view prices
Wipes - Tuff Wipes, Hand and Surface Towels
Pack of 75 Tuff Wipes for use on hands and cleaning surfaces. 9 1/2 x 12" sized sheets.
  • Easy-to-use textured wipes help clean up in a hurry.
  • Economical. Tough on grease, gentle on hands and surfaces.
  • Recommended for cleaning up paints, adhesives and lubricants.
Please Log In to view prices
DeoxIT® Fader F5 - Caig, 5% solution
This product is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.
Please Log In to view prices
DeoxIT® D5 - Caig, Mini Spray, 5%, 24g
The popular DeoxIT D5 contact cleaner & rejuvenator is now available in a mini spray can. DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion. This mini can comes with an attachable straw that fits in the adjustable spray nozzle for a controlled flushing action. DeoxIT® D5 is safe on plastics. Key Features:
  • Improves Conductivity
  • Deoxidizes, Cleans and Preserves
  • Reduces Intermittent Connections
  • Reduces Arcing & RFI
  • Reduces Wear & Abrasion
  • Temperature Range, -34 C (-29 F) to +200 C (400 F)
Please Log In to view prices
Care Pack - Lizard Spit, for Guitar / Bass
This Lizard Spit Guitar and Bass Care Pack contains 4 oz. Fretboard Conditioner, 4 oz. Guitar Polish, and a Lizard Spit Micro Fiber Cloth, everything you need to keep your guitar or bass in good condition and looking brand new!
Please Log In to view prices
Brushes - Caig, for connector cleaning, package of 100
Nylon brush for cleaning contacts and connectors. Ideal for phone and phono(RCA), XLR, coax connectors and patchbays. Package of 100
package of 100
Please Log In to view prices
String Cleaner - Dunlop, Ultraglide 65
Extend string life with Ultraglide 65!
Dunlop Ultraglide 65 String Cleaner and Conditioner is also known as “the squeak eliminator”. This is the #1 way to restore brilliance to your strings and increase string life. Ultraglide 65 conditions your strings with a silky smooth playing surface while shielding against tarnish and corrosion.
  • Protects against corrosion and tarnish
  • Increases string life
  • 2 oz applicator bottle
Please Log In to view prices
Vacuum Tube Survival Kit - Caig, DeoxIT® Gold
The Caig DeoxIT® Gold GxMD Vacuum Tube Survival Kit includes everything you need to properly clean the pins of vacuum tubes and tube sockets.
Please Log In to view prices
Container - for mixing and measuring, 1 Quart
1 quart mixing container. Quickly measure and mix paints, chemicals and adhesives. Clearly marked graduations for quick measuring. Made of translucent high-density polyethylene. Optional lid S-TMIX-1-LID (sold separately) seals the container and prevents spills.
Please Log In to view prices
DeoxIT® Gold - Caig, Brush Applicator
DeoxIT® GOLD G100L (formerly ProGold), 7.4mL Bottle with Brush Applicator, 100% solution.
  • Cleaner Audio
  • Cleaner Video
  • Reliable Data
  • Improve your:
    • USB
    • Firewire
    • HDMI/DVI
    • RCA
    • BNC
    • SCSI
    • Ethernet
    • S-Video
    • Component Video
    • HDTV Connections
    • ¼" Input Jacks
Please Log In to view prices
Threadlocker - Bob Smith Industries, IC-LOC Red
IC-LOC™ Red is a medium thickness, high strength thread lock that is applied to the threads of fasteners before assembly. Once the IC-LOC Red™ is cured, the fasteners are permanently together and cannot be disassembled. IC-LOC Red™ will maintain its strength up to 490° F. Uses
  • Threads of fasteners
  • Threads that need permanent bond

Directions: Shake well and then apply IC-LOC™ Red to the clean and dry threaded areas before assembling non- plastic parts. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™Red is anaerobic and cures in the absence of air, which occurs when a bolt, screw or nut is tightened. IC-LOC™ Red permanently prevents the loosening of threaded fasteners from shock and vibration, while sealing and preventing the rusting of threads. Cured temperature range is -60° to +300°F (-51° to +149°C).
Please Log In to view prices