Wire Stripper / Cutter - Xcelite, 6", with Spring and Lock

Item Unavailable

Sorry! You are trying to check out one of our items which is no longer available. Why not check out one of these alternate options?

Wire Stripper / Cutter - 8", 10-24 AWG
Heavy duty wire strippers with additional cutting and crimping features. Capable of stripping 12 through 24AWG stranded wires and 10 through 22AWG solid wires, these strippers can handle most wires used in electronics.
Please Log In to view prices
Wire Stripper / Cutter - Xcelite, 5", with Cushion Grip Handle
5" wire stripper & cutter with cushion grip handles. Features:
  • Cuts and strips both solid and stranded wire cleanly, neatly.
  • Adjustable screw stop for different wire sizes.
  • Hardened with ground blades.
  • Red plastic-coated cushion grip provides maximum leverage.
  • Strips 8AWG - 22AWG wire.
Please Log In to view prices
Tool Set - Rocket Sockets, Pepers’ Pedals, Complete Set
Rocket Sockets by Pepers' Pedals allow for the tightening of various nuts for jacks, potentiometers and switches on guitar effects pedals without scratching the enclosure and damaging the graphics or paint as the typical metal tools will do.
Please Log In to view prices
Staking Tool Set - Anvil and Punch, for Eyelets and Turrets
Staking tool set that includes both the anvil and swage/punch. The set works with standard turret and eyelet sizes commonly used in amplifiers. The anvil also can be used with Y style turrets.
Please Log In to view prices
Truss Rod Wrench - Phillips Head / Cross Head
High quality Phillips head truss rod wrench. This Japanese made wrench is the perfect tool for cross slotted truss rod nuts found on many Fender® necks. The compact 9mm diameter head has a thin 11mm width allowing for adjustments without removing the neck
Please Log In to view prices
Tool - Slotted Nut Driver, for Qingpu Jacks
Simple and easy to use nut driving tool for the slotted nuts found on Qingpu jacks that are commonly used in Eurorack modules. The tool anchors into the sleeve of the jack ensuring no slippage when in use, protecting the faceplate from accidental damage. The two grip holes are cut to the size of M2.5 and M3 hex nuts and can be used in a pinch to tighten nuts of those sizes, or to hang your tool on a keyring! One side of the tool works with Mod "Top Brass" nuts and slotted W-QP-NUT-K nuts used on W-QP-518MA, W-QP-419GR, and W-QP-518MA-BM. The other side works with slotted W-QP-NUT-PJ-R nuts used on W-QP-PJ3410. Either side will work with Befaco Bananuts for 3.5mm jacks (W-BNUT-X). The nut driving tool is made of steel.
Please Log In to view prices
Cutters - Xcelite, Shearcutter, General Purpose
5" Overall Length, 3/4" Jaw Length. Great for cutting wire and component leads, etc. Product Features:
  • Low profile, general-purpose cutter
  • Superior blade by-pass shear cutting action
  • Better cuts with half the effort
  • Greatly reduced mechanical shock delivered to the work
  • Features red grips
  • Flush cuts soft wire up to 20 AWG (0.8mm)
Please Log In to view prices
Staking Tool - for Eyelets and Turrets
Turret staking tool for use with our turrets (S-HTUR-SG-2X, S-HTUR-SG-3X, S-HTUR-PR-3S).
For anvil see S-T1717
For smaller staking tool, see S-T1714
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
Please Log In to view prices
The Nibbler - cutter for square holes
Instructions
  • Simply drill 3/8" hole insert cutting head and compress handles.
  • Gives you the ability to make square holes for fuse holders, special connectors displays etc.
  1. Material to be nibbled is placed in the gap between the punch and blade channel.
  2. By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal.
  3. A scribe line can be followed by looking down on work in this position.
Please Log In to view prices
Adjustment Tool - Bourns Trimpots, H-90
Bourns trimmer adjustment tool. This tool is compatible with both the R-VT96Y-X multiturn trimmers and the R-VT62P-X single turn trimmers. The recessed end is especially helpful when used with the 3296Y trimmers to avoid slipping off of the screw adjuster. Features
  • Meets UL 94V-0
  • Pocket clip
  • For use on most trimmer shafts/rotors
  • Recessed end for use with extended shafts
  • RoHS compliant
Please Log In to view prices
Brush - Befaco, Gear Duster
Gear duster from Befaco. The Befaco Synth Duster is a great tool for getting dust off of faceplates and other hard to reach spots on your equipment. The super soft bristles can gently clean around pots, jacks, and other hardware.
Please Log In to view prices
Center Punch - Spring Loaded, Adjustable Force
Spring loaded center punch with an adjustable force for aligning pilot holes when drilling into materials. The large handle makes the push-to-strike action simple and accurate. Rotating the red handle adjusts the force amount.
Please Log In to view prices