ProCo StageMaster cables are designed to be quiet, durable and dependable. Constructed from high quality materials and built to withstand everyday use. They are hand-soldered to perfection using top quality metal 1/4” connectors and extremely low-noise cable.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. These pickups use alnico 5 pole pieces to produce a warm, well rounded classic tone.

Nylon cable tie mounts with adhesive backing. These mounts easily attach to most surfaces using a strong foam adhesive. Zip ties can be fed through the openings on the mount to secure wires to an enclosure, board, or any other convenient location.

Receptacle for panel or chassis mounting. Flange has two .136" (3.45 mm) diameter countersunk holes for #5-40 flat head mounting screws (not supplied). Mounts from front of panel or chassis in .953" (24.21 mm) diameter. Standard latchlock;

Fender® style, 1-button, vintage style with shielded wire and RCA plug (16 foot cable). Multiple color options available.

Premium 9V battery clip with a rigid plastic frame. This high quality battery snap features nickel-plated phosphor bronze contacts. The six inch leads are 26 AWG stranded wire, prestripped and tinned for an easy installation.

Small 42TM018 audio transformers with a 10KΩ:600Ω impedance. This transformer is a popular choice for pickup simulators in various effects such as fuzz pedals. The leads are soft metal wire and can be adjusted to fit a variety of applications. RoHS compliant. Rated for 200mW.

Fully insulated quick disconnect connectors for use with spade lugs. These connectors are size .187” and fit wire gauges 16-22AWG. These connectors are simple to attach to speaker wires using a crimping tool such as S-T-CP412G.

24AWG StageMASTER Instrument Cables are designed to be quiet, durable and dependable. They are hand-soldered to perfection using top quality metal ¼" connectors and extremely low-noise cable.

1/4" Mono phone plug. Features a stylised shell design, robust diecast shell, great solderability, flexible grommet cable protection and quick and easy assembly

The all new TAD-EL84-STR Redbase brings together the best of both - the famous EL84-Cz and the EL84M. We opted for the thickest glass possible and the heaviest construction available, just like the Russian EL84M, and combined these features with the sonically most promising cathode plate options, in order to meet and exceed the tonal quality of the EL84-Cz especially with regard to its linearity over the entire frequency range. Finally we added the gold grid wire in order to improve overall reliability. The sound can be described as very harmonic in the middle and treble frequencies, without adding too much power to the bass. The result is the best EL84 in current production. Note: Due to its diameter of 22.5mm, the TAD EL84-STR does not fit into older Marshall DSL401 made till week #20 in 2014 and the UK made VOX AC15 TBX amplifiers from the same time period.

High impedance crystal earphone - very sensitive and works great with crystal radios. Has 3 a foot cord and miniature (3.5 mm) plug.

High quality radial capacitors rated at 100V. These MKT368 capacitors are produced by Vishay BC and formerly by Philips. These capacitors are made with metalized polyester film and sealed in epoxy lacquer. Their style and make is similar to the tropical fish capacitors of the 1960s and 70s. Suggested applications include blocking, bypassing, filtering, coupling and energy reservoir applications. Features

• Polyester film dielectric
• Vacuum deposited aluminum electrodes
• Wound mono construction
• Flame retardant epoxy material (UL-class 94 V-0)
• Tinned wire radial leads
• Performance Grade 1 (long life)
• ±10% tolerance
• Rated 100VDC

Voltage Rating SKU 100V C-368-X-100 250V C-368-X-250 400V C-368-X-400

(63/37 Rosin Core) - ..031" Diameter, 1 lb Spool, contains lead alloy. Kester 44 Rosin Flux is an activated rosin formula for use in flux-cored solder wire. Kester 44 Rosin Flux has virtually dominated the field of activated rosin core solders for well over four decades. An outstanding performance feature of this flux is the “instant-action” wetting behavior.

Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender&reg offers this high quality, 4 position switch with knob and mounting hardware. Telecaster players have long debated the merits of having their pickups wired in parallel vs. in series. In the traditional parallel wiring configuration, pickup output is relatively consistent across all three positions. A Telecaster with its pickups wired in series differs in that when both pickups are on at the same time, the combination produces fatter tone and higher output.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.

5" Overall Length, 3/4" Jaw Length. Great for cutting wire and component leads, etc. Product Features:

• Low profile, general-purpose cutter
• Superior blade by-pass shear cutting action
• Better cuts with half the effort
• Greatly reduced mechanical shock delivered to the work
• Features red grips
• Flush cuts soft wire up to 20 AWG (0.8mm)

Chassis ground washer for 15/32” hardware such as footswitches, full-size Carling toggles, and Switchcraft toggles. These grounding lug washers have a 0.48” inner diameter and also work with M12 hardware. The ¼” tab can be used with quick disconnects or can be directly soldered to wire.

9 volt battery clip with 5 3/4" red and black wire lengths. Simple construction and perfect for use in effects pedals. Package of three.

The TAD EL34-STR REDBASE™ is a glass envelope pentode with a plate dissipation rating of 25 Watts with convection cooling. It is intended for audio frequency power amplification service in either pentode, ultralinear or triode connection and single ended or push-pull/parallel applications.
The TAD EL34-STR REDBASE™ is designed to be a direct replacement for any EL34 / 6CA7 / KT77 or equivalent. Close manufacturing specification tolerances, gold wire grid, improved processing and final testing and QC at TAD in Germany provides enhanced reliability, superior sonic performance and grants overall consistency.

Small 42TM022 audio transformers with a 1.5KΩ:600Ω impedance. This transformer is a popular choice for octavia style builds as well as ring modulators. The leads are soft metal wire and can be adjusted to fit a variety of applications. RoHS compliant. Rated for 200mW.

1/4" professional phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

1/4" Mono Phone plug, Right angle, Diecast Shell, Satin finish, Flexible grommet. Features:

• Stylised Shell design
• Robust diecast shell
• Great solderability with increased solder area
• Precision machined contacts
• Flexible grommet cable protection
• Quick and easy assembly

2 pole cable connector, chuck type strain relief. Mates with W-SO-J21 The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination. Features:

• Current rating 40 A continuous, 50 A audio signal with 50% duty cycle
• Only 3 parts, easy to assemble
• High impact materials – long-lasting and reliable
• Easy and extremely precise locking system "Quick Lock"
• 1 piece strain relief, chuck for 6 to 10 mm cable O.D.
• Improved grip on latch
• Mates with 4-pole chassis connector W-SO-J41 as well and makes contact with +1/-1