Vacuum Tubes

Dissimilar double-triode designed for use as a combined vertical deflection oscillator and amplifier in television receivers

Metal duplex-diode high-mu triode. It is intended primarily for use as a combined detector, amplifier, and automatic-volume-control tube in radio receivers.

The Sovtek 5881WXT is the same as the 5881 but with a full size base for easy installation in vintage amp designs. The Sovtek 5881 delivers a warm, round tone that "sweetens" any vintage or modern guitar amp design. Built to rigid military standards, the 5881 will tolerate higher voltages than any other 6L6. In fact, they're frequently used as replacements for the old 7027 model in vintage Ampegs. Extremely consistent from piece to piece. The Sovtek 5881 has a heater voltage of 6.3 volts at 0.88 amperes.

Miniature, medium-mu twin triode for use as a frequency divider in computer applications.

Medium mu triode and a sharp cutoff pentode. The pentode section may be used as an IF amplifier or a reactance tube; the triode section is well suited for use in low-frequency-oscillator, sync clipper, sync separator, and phase splitter circuits.

Higher in gain than the 5881WXT, with full base.
Sovtek is proud to announce the release of their new 6L6WXT+ vacuum tube. Modelled after the vintage RCA 6L6GC "blackplate," the Sovtek 6L6WXT+ features larger plate dimensions and improved grid structure for increased power handling capabilities. The 6L6WXT+ also features mica spacers with metal springs to eliminate tube rattle and microphonics. The Sovtek 6L6WXT+ yields a 20% higher output than the Sovtek 5881WXT and offers superior tone and overall performance to any 6L6 or KT66.

The JJ Electronic E88CC / 6922 is a great replacement for any 6922, 6DJ8, or E88CC tube. JJ implements a solid construction that those familiar with their preamp tubes will find familiar. This tube’s high end clarity and warm smooth mids make the JJ E88CC and excellent choice for Hi-Fi preamps and amplifiers.

Due to many requests by fans, the Tung-Sol EL84/6BQ5 has been reissued. The Tung-Sol EL84 / 6BQ5 was a popular OEM tube for American-made EL84 / 6BQ5 guitar amplifiers, such as those built by Gibson and Harmony. Due to its rugged construction and conservative ratings, it is the most reliable current production EL84 type available for use in Vox AC-30 type amplifiers. In addition, its linearity and tone characteristic make it the ideal replacement for EL84 hi-fi amplifiers, such as those built by Fisher, Scott, and Harmon-Kardon. Tube measurements are as follows:

• Height: 2.75” (without pins)*
• Diameter: 0.87”*

*Note: Due to the method of production in regards to the glass, measurements may vary slightly.

Miniature heptode primarily designed to perform the combined functions of the mixer and oscillator in superheterodyne circuits in both the standard broadcast and FM bands.

Miniature tube which contains a sharp-cutoff pentode and a medium-mu triode. Each section has a separate cathode and is electrically independent.

Miniature pentagrid converter designed to perform simultaneously the combined functions of the mixer and oscillator in superheterodyne receivers. The tube is suitable for use in the standard broadcast and FM bands.

The JJ Electronic 6SN7 is the classic double triode with a rugged construction the offers the high reliability that JJ is known for. The JJ 6SN7 features the outstanding linearity and sound of the original tubes. This tube is an excellent replacement for Hi-Fi amplifiers and preamps and will replace any 6SN7, 6SN7GTA, 6SN7GTB, or 6SN7GT.

High grade tube. Tweed Up Your Amp! Vintage tone for original vintage Fender tweed amps. The original tube for all those Fender® tweed amps from the 50s. Brings back the original sound to your tweed amp.

Dissimilar double triode in the 9-pin miniature construction. It is especially suitable for applications requiring a high gain voltage amplifier and a cathodyne type phase-inverter.

Premium high-voltage power pentode, featuring improved materials and workmanship over the original EL34B. Higher impedance design with increased touch responsiveness.

• Unique clipping characteristic with a hint of 6L6 sound
• Velvety-smooth in HiFi applications, full & rich-sounding in guitar amps
• 6CA7 equivalent

The T-12SK7 is the same as the 6SK7 except for heater ratings.

Transmitting beam power amplifier.

Heather-cathode type high-mu twin triode of miniature construction designed for use as a resistance-coupled voltage amplifier or phase inverter and blocking oscillator.

Miniature double triode having dissimilar sections. Section no. 1 is intended for operations as a vertical deflection oscillator and section no. 2 as a vertical deflection amplifier.

The all new TAD-EL84-STR Redbase brings together the best of both - the famous EL84-Cz and the EL84M. We opted for the thickest glass possible and the heaviest construction available, just like the Russian EL84M, and combined these features with the sonically most promising cathode plate options, in order to meet and exceed the tonal quality of the EL84-Cz especially with regard to its linearity over the entire frequency range. Finally we added the gold grid wire in order to improve overall reliability. The sound can be described as very harmonic in the middle and treble frequencies, without adding too much power to the bass. The result is the best EL84 in current production. Note: Due to its diameter of 22.5mm, the TAD EL84-STR does not fit into older Marshall DSL401 made till week #20 in 2014 and the UK made VOX AC15 TBX amplifiers from the same time period.

Miniature medium-mu twin triode each section of which as a separate cathode connection. The tube is suited for use in a wide variety of general-purpose amplifier and mixer circuits as well as numerous multi-vibrator and oscillator applications.

Medium-mu twin triode suitable for use in a wide variety of general purpose amplifier and phase-inverter applications. Except for heater characteristics and ratings, the 12SN7GA-B is identical to the 6SN7GTB

Miniature, medium-mu, semi-remote cutoff twin triode intended for application as a VHF cascode amplifier in a television receiver.

Miniature half-wave rectifier for use in line-operated equipment having series-connected heaters. The heater is tapped to permit operation of a panel lamp.