Vacuum Tubes

The first electronic amplification of sound was done with Vacuum Tubes. We have pre-amp, power and rectifier vacuum tubes among other types in New Old Stock from the golden era of American & European manufacturing as well as current production tubes from today.
Vacuum Tube - 6550, Tung-Sol Reissue
Copy of the original type 3 Tung-Sol 6550 made in the 1960s. Triple getter, carbonized screen, and gold plated grid. The current production benchmark of the classic 6550.
Made in Saratov, Russia
Please Log In to view prices
Vacuum Tube - GZ34 / 5AR4, Mullard Reissue
Premium directly heated heavy duty rectifier Diode. Re-issue of the most popular rectifier valve ever built by Mullard. Helps extend the life of the other valves in the amplifier by allowing them to heat up before plate voltage is applied.
  • Low internal voltage drop & controlled heater warm up time
  • Excellent choice for both Hifi and instrument amplification
  • Replacement/upgrade for all 5AR4/GZ34 types
Please Log In to view prices
Vacuum Tube - 5751, Tube Amp Doctor, Premium Selected
Low-noise Tube for Best Clean Tone! The TAD Selected 5751 is Tube Amp Doctor's first choice for noticeably improved clarity, smoothness, and a true vintage tone character for most guitar amps!
Please Log In to view prices
Vacuum Tube - 5654 / 6AK5W, Pentode, Sharp Cut-Off, RF
Miniature sharp-cutoff pentode for use as a wide-band, high-frequency amplifier. It is also useful in video and audio amplifiers, oscillators, mixers, frequency multipliers, and cathode followers.
Please Log In to view prices
Vacuum Tube - 6AV6 / EBC91, Dual Diode, Triode
Miniature duplex-diode, high-mu triode intended primarily for use as a combined detector, amplifier, and automatic-volume-control tube in radio receivers. The triode section incorporates a high amplification factor
Please Log In to view prices
Vacuum Tube - EL84, Electro-Harmonix
Tube measurements are as follows:
  • Height: 2.75” (without pins)*
  • Diameter: 0.87” *

*Note: Due to the method of production in regards to the glass, measurements may vary slightly.
Please Log In to view prices
Vacuum Tube - KT77, JJ Electronics
A reproduction of the original tubes that captures the sound that made the KT77 famous. In their typical fashion, JJ has built this tube in a solid construction that is robust and highly reliable. This tube has more headroom than a typical EL34. This is an excellent tube for adding more power to the sound of an EL34 amp.
Please Log In to view prices
Vacuum Tube - 12AT7, Mullard Reissue
Mullard 12AT7 / ECC81 dual triode preamp tube. Made in Russia.
Please Log In to view prices
Vacuum Tube - 12BH7-A, JJ Electronics
The JJ Electronic 12BH7-A is a faithful reproduction of the original tube. Its rugged construction offers high reliability. The JJ 12BH7-A can be used as a replacement for any 12BH7 tube.
Please Log In to view prices
Vacuum Tube - 6BA6 / EF93, Pentode, Remote Cut-Off
Miniature remote-cutoff pentode primarily designed for use as a high-gain radio-frequency or intermediate-frequency amplifier. Features include small size, low grid-plate capacitance, and high transconductance
Please Log In to view prices
Vacuum Tube - 5881, JJ Electronics
The JJ Electronic 5881 is very similar to the 6L6GC but with a plate dissipation of 23W rather than 30W. Another physical difference is the shorter bulb. These tubes have a soft and balanced response that sounds great in both guitar amps and hifi equipment. The JJ 5881 will work in any amp that uses 6L6 tubes.
Please Log In to view prices
Vacuum Tube - EL84, Mullard Reissue
Russian made Mullard reissue EL84. Copy of the original. Black plates, carbonized screens, and gold plated grids. This tube was the "Voice of the Vox AC-30." A mainstay of affordable quality hi-fi amplifiers of the 1960s. Tube measurements are as follows:
  • Height: 2.75” (without pins)*
  • Diameter: 0.87”*

*Note: Due to the method of production in regards to the glass, measurements may vary slightly.
Please Log In to view prices
Vacuum Tube - 6AQ5A / 6HG5, Tetrode, Beam Power
Miniature beam-power pentode designed for use in the audio-frequency power output stage of television and radio receivers. It may also be used as a triode-connected vertical deflection amplifier in television receivers.
Please Log In to view prices
Vacuum Tube - 5AR4, Tung-Sol Reissue
Tung Sol 5AR4 rectifier tube. Made in Russia. Premium directly heated heavy duty rectifier Diode. Helps extend the life of the other valves in the amplifier by allowing them to heat up before plate voltage is applied. Tung-Sol tubes reflect the best in vintage construction with unsurpassed tone and reliability.
  • Low internal voltage drop & controlled heater warm up time
  • Excellent choice for both Hifi and instrument amplification
  • Replacement/upgrade for all 5AR4/GZ34 types
Please Log In to view prices
Vacuum Tube - EL509, JJ Electronics
The JJ Electronic EL509S is an eight pin octal based version of the EL509 / EL519. This modified version does not have the top plate cap which is instead wired to a pin on the octal base. This tube is rated for 700V and 42 Watts plate dissipation. The JJ EL509 is popularly used in output transformerless OTL amplifiers.
Please Log In to view prices
Vacuum Tube - 5879, Pentode, Sharp Cut-Off
Sharp-cutoff pentode of the 9-pin miniature type intended for use as an audio amplifier in applications requiring reduced microphonics, leakage noise, and hum.
Please Log In to view prices
Vacuum Tube - 6SQ7, Diode, Dual Triode
Metal duplex-diode high-mu triode. It is intended primarily for use as a combined detector, amplifier, and automatic-volume-control tube in radio receivers.
Please Log In to view prices
Vacuum Tube - 12AT7 / ECC81, Triode, Dual, HI-MU
The 12AT7 is a miniature, high-mu, twin triode designed for use as a grounded-grid radio-frequency amplifier or as a combined oscillator and mixer at frequencies below approximately 300 megacycles.
Please Log In to view prices
Vacuum Tube - EL84 / 6BQ5, Tung-Sol Reissue
Due to many requests by fans, the Tung-Sol EL84/6BQ5 has been reissued. The Tung-Sol EL84 / 6BQ5 was a popular OEM tube for American-made EL84 / 6BQ5 guitar amplifiers, such as those built by Gibson and Harmony. Due to its rugged construction and conservative ratings, it is the most reliable current production EL84 type available for use in Vox AC-30 type amplifiers. In addition, its linearity and tone characteristic make it the ideal replacement for EL84 hi-fi amplifiers, such as those built by Fisher, Scott, and Harmon-Kardon. Tube measurements are as follows:
  • Height: 2.75” (without pins)*
  • Diameter: 0.87”*

*Note: Due to the method of production in regards to the glass, measurements may vary slightly.
Please Log In to view prices
Vacuum Tube - 12AU7A / ECC82, Tube Amp Doctor, Premium Selected
The Perfect Choice for Stereo Audio Applications - Ideal as a Balanced Driver. Latest revision providing great musical performance and rich tone. This TAD 12AU7A / ECC82 has especially strong systems which are selected to provide two symmetric triodes. The perfect choice for stereo audio applications and ideal as a balanced driver.
Please Log In to view prices
Vacuum Tube - 5963 / 12AU7A, Dual Triode
Miniature, medium-mu twin triode for use as a frequency divider in computer applications.
Please Log In to view prices
Vacuum Tube - 12AX7-A, Triode, Dual, High MU
Miniature high-mu twin triode each section of which has an individual cathode connection - especially suited for use in resistance-coupled voltage amplifiers, phase inverters, multivibrators, and industrial-control circuits.
Please Log In to view prices
Vacuum Tube - 6J7 / EF36, Pentode, Sharp Cut-Off
Sharp cut-off general purpose amplifier. With the exception of heater and capacitance ratings, the electrical characteristics are similar to those of the 6C6.
Please Log In to view prices
Vacuum Tube - 6GH8A, Triode, Pentode
Miniature tube which contains a sharp-cutoff pentode and a medium-mu triode. Each section has a separate cathode and is electrically independent.
Please Log In to view prices