Vacuum Tubes

A high performance, long plate version of the ECC82 / 12AU7. Like all JJ preamp tubes, these are built into a rugged package using the spiral filament and robust plate structure resulting in low microphonics and high reliability. The long plate version of this tube differs from the standard version with its stronger and fuller sound which offers a wider and more balanced frequency response.

Mullard 12AX7 / CV4004 dual triode preamp tube. Made in Russa. The CV4004/12AX7 is a high gain, low noise valve with a short plate structure for reduced microphonics. Excellent for use in high gain Marshall pre-amplifier circuits where noise and microphonics can be a problem. Great for guitar amps.

Medium mu triode and a sharp cutoff pentode. The pentode section may be used as an IF amplifier or a reactance tube; the triode section is well suited for use in low-frequency-oscillator, sync clipper, sync separator, and phase splitter circuits.

A new take on the classic 12AX7 preamp tube. While it uses the same rugged build and thick glass as other JJ preamp tubes, this tube differs in construction from the typical 12AX7 in that it features a medium-long plate, which provides a dynamic and open sound with a rich forward sounding mid range. This tube offers low noise and low microphonics.

Miniature sharp cutoff pentode primarily designed for use as a high-gain radio-frequency or intermediate-frequency amplifier. Its low grid-plate capacitance and high transconductance make it especially suited for high-frequency wide-band applications

The JJ Electronic 6SL7 is a great reproduction of the classic octal based dual triode. This tube has the quality construction and reliability that one would expect from a JJ tube. The JJ 6SL7 is a great replacement tube for any 6SL7 position such as early Fender, Gibson, and Ampeg amps as well as Hi-Fi equipment.

Superior medium-mu twin triode driver tube for hifi use. 3.5 watts dissipation per plate. New design of excellent quality

The JJ Electronic 7591 is a reliable and accurate reproduction of the classic tube. This 19 Watt pentode has been used in a variety of amplifiers including Hi-Fi amps and Ampegs. The JJ 7591 is a great replacement for any 7591 tube position.

A true to form reproduction of a classic tube that will work in most EL34 amps. The 6CA7 is often considered the American cousin to the British EL34. Sonically, this tube is closer to a 6L6 than an EL34 but without the sometimes harsh high end of the 6L6.

Electro-Harmonix has released a low noise, low microphonic version of the 12AX7 that meets all specifications required for the tube to be designated 7025.

9 pin miniature preamp tube (Amplification Factor = 100). This Russian tube is full bodied and well balanced. It has a high gain with a very smooth presentation. In overdrive, it is not quite as defined as the 12AX7-S-JJ, but it offers more crunchy fizz.

Sovtek 12AX7WC dual triode preamp tube. Made in Russia.

Electro-Harmonix 12AT7 / ECC81 Vacuum Tube Large plate format, superior dissipation over the originals. Perfect for reverb and driver circuits.

Miniature, medium-mu triode suitable for use in a wide variety of general purpose applications. It is especially useful as a local oscillator in high-frequency and very-high-frequency receiver circuits.

Miniature remote-cutoff pentode primarily designed for use as a high-gain radio-frequency or intermediate-frequency amplifier. Features include small size, low grid-plate capacitance, and high transconductance

Miniature beam-power pentode designed for use in the audio-frequency power output stage of television and radio receivers. It may also be used as a triode-connected vertical deflection amplifier in television receivers.

Octal power tube (Max Plate Watts = 14W) Beam power tetrode with a specially developed cathode coating, careful alignment of the grid, tri-alloy plate material for flawless performance up to 475 volts. Perfect for high plate voltage amplifiers like the Fender Deluxe Reverb.

Totally Tweed! The preferred OEM tube of '50s-era Fender Tweed Champ and Deluxe amplifiers The Tungsol 6V6 has a geometry designed to safely handle the higher voltages used in guitar amps " plus heavier plate and grid materials. The result.. better mids and bottom while keeping the smooth top of the classic 6V6's. The Tungsol 6V6 breaks up evenly from low E to high up the neck. Blues players will LOVE these tubes for the way they sing!

Miniature heater-cathode type twin diode designed for full-wave rectifier operation in compact power supplies. The tube is intended for service in automobile and a-c radio receivers.

Tung Sol 12AT7W / 6201 dual triode preamp tube. Made in Russia. Premium Twin Triode ideal for use in reverb and driver circuits. Superior dissipation compared to NOS versions of this tube.
• Extra-low microphonics makes it the best 12AT7 choice for reverb circuits. Also suitable for HiFi.
• Factory selected for closest tolerances and most consistent performance
• ECC81 equivalent

The Psvane ECC81 is a high quality, medium gain, dual triode. This tube has a noval base and is praised for its lush and detailed sound. The Psvane 12AT7 works well in any ECC81 / 12AT7 position. The Psvane Classic Series is focused on the reproduction of popular vacuum tubes found in classic audio equipment. When designing the Classic Series, Psvane collected the most sought-after NOS tubes and analyzed each element of their construction, incorporating the most effective manufacturing techniques to produce stable tubes with excellent sound. Whether used in guitar amplifiers or hifi stereo systems, the Psvane Classic Series vacuum tubes excel in all applications. Psvane has been producing high quality vacuum tubes since 2011. The Psvane team originally formed in Shuguang’s high-end tube division but eventually split off to form their own brand.

The Tube Amp Doctor premium selected 12AX7 / ECC83-Cz features big, warm, clean sounds with a mellow top-end when pushed to overdrive. It’s a great choice for guitar amps and HiFi alike. The ECC83-Cz is recommended if you want to emphasize punchy mids and is especially great when pushed into a fat overdrive. The TAD™ ECC83-Cz is a miniature, high-mu twin triode with good gain, round deep bass, somewhat compressed mids and very smooth top end. Selected and recommended for guitar amps to smoothen up the tone or for HiFi to shape the body of sound more to “that” tube tone. Best for jazzy and thick clean as well as for vintage bass response. Recommended for all positions in amps with medium gain level or High-Gain Amps for V2+ positions. As for V1 in general but especially for higher gain amps or phono/audio-amps, we recommend the RT030 7025/E83CC Highgrade, T-7025-HG-TAD.

9 pin miniature type beam power tube. Its heater has a controlled warm-up time.

Tung Sol 6L6GC “STR” beam-power tetrode tube. Made in Russia. The Tung-Sol legacy continues with the introduction of the new 6L6GC STR. The ultimate in musical tone and smooth overdrive, the STR delivers the sound that established Tung-Sol as the benchmark of quality. Built to the same “Special Tube Request” specs of leading amplifier manufacturers of the 1960s, the 6L6GC STR is a rugged and reliable power tube for use in the most demanding guitar amplifier circuits.