Vacuum Tube Accessories

Heavy plain white boxes with dividers to cushion tube. Minimum order of 10 per size.
Please Log In to view prices

9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
- Bottom, PC mount
- ¾” chassis hole required
- ¾” tail diameter
Please Log In to view prices

High insulated 8-pin tube socket commonly used for octal power tubes. Fits 1 3/16" to 1 1/4" chassis hole diameter. Applicable for use in all types of electric and electronic equipment using vacuum tubes. Features:
- Panel saddle mounting
- Easy mount with the saddle of extruded screw hole
- Phosphorus bronze terminal pin with solder plating
- Glassfiber filled PPS insulating material.
Please Log In to view prices

Belton micalex tube socket commonly used for preamp tubes or EL84 power tubes
- Fits ¾" chassis hole diameter
- See P-SS9-400 for a compatible tube shield
Please Log In to view prices

9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
- PC mount
- 13/16” tail diameter
- Available with standard or gold pins
Please Log In to view prices

Grips tube base with 'teeth' to securely hold tube in place. For use with octal sockets with 1-1/2" mounting centers. Super high quality. Spring plate with Nickel plating. Please Note: This tube clip will not work with socket P-ST8-500
Please Log In to view prices

New production, aluminum, 2" tall, for use with P-ST9-700 and P-ST9-700-PC.
Please Log In to view prices

High temperature silicone damper / dampener rings great for remedying microphonic oscillations and tube rattle. These red dampening rings are rated for temperatures up to 240°C and come in various sizes to fit a variety of tubes. Please verify your tube sizes to ensure a proper fit.
- 20mm: Recommended size for 12A_7 (i.e. 12AX7, 12AT7, 12AU7, etc.) types, EL84, or any other tube with a ~20mm diameter.
- 28mm: Recommended size for 6V6, 6SN7, 5AR4, or any other tube with a ~28mm diameter.
- 30mm: Recommended size for some EL34, Svetlana EL34, JJ GZ34, Gold Lion KT77, or any other tube with a ~30mm diameter.
- 32mm: Recommended size for some EL34, 6L6, 6CA7, or any other tube with a ~32mm diameter.
- 35mm: Recommended size for 6L6GC, 5U4G, 6146B, or any other tube with a ~35mm diameter.
Please Log In to view prices

Colors Available:
Please Log In to view prices

9 pin miniature Belton socket. Applicable for use with all types of electric and electronic equipment using vacuum tubes.
- Paddle saddle mounting
- Phosphorous bronze pin terminal with tin plating
- Glassfiber filled PPS Insulating material
- Easy mount with collar attached socket
- 1-⅛" mounting centers
- Fits ¾" chassis hole
- Top mount
Please Log In to view prices

8-pin ceramic stand-off tube socket commonly used for octal based power, preamp, and rectifier tubes.
- PC mount
- 1” tail diameter
- Available with standard or gold pins
Please Log In to view prices

(Belton) Micalex, 9 pin miniature socket with PC pins, stand off mounting. Fits 3/4" chassis hole diameter (bottom mount). Applicable for use with all types of electric and electronic equipment using vacuum tubes. Features:
- Paddle saddle mounting
- Phosphorous bronze pin terminal with tin plating
- Glassfiber fileld PPS Insulating material
- Easy mount with collar attached socket
Please Log In to view prices

Belton Micalex tube socket used for 9 pin miniature tubes, bottom mount. Applicable for use with all types of electric and electronic equipment using vacuum tubes.
Features:
- Chassis hole: ¾”
- Mounting Centers: 1-1/8”
- Bottom mount
Features:
- Paddle saddle mounting
- Phosphorous bronze pin terminal with tin plating
- Glassfiber fileld PPS Insulating material
- Easy mount with collar attached socket
Please Log In to view prices

For use with guitar amps and applications where tube is suspended upside down in chassis. Use with suspended 5881, 6L6, and EL34 tubes.
Please Log In to view prices

Tube retainer for EL84. for use with guitar amps and applications where the tube is suspended upside down in the chassis. Supports a maximum tube height of 2.8 inches
Please Log In to view prices

Ceramic Tube socket used for octal power tubes.
- Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/16”, Bottom: 1-1/4”)
- Mounting Centers: 1-1/2” with oblong mounting holes
Please Log In to view prices

Belton 8-pin Micalex tube socket commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
Features:
- Convenient top or bottom, PC mount capabilities
- 1-1/4” chassis hole required
- 1-1/2” mounting centers
Features:
- Paddle saddle mounting
- Phosphorous bronze pin terminal with tin plating
- Glassfiber filled PPS Insulating material
- Easy mount with saddle of extruded screw hole
- Short leads
Please Log In to view prices

Plastic octal tube socket commonly used for power tubes in many amps.
- Chassis hole: 1 ⅛"
- Mounting Centers: 1 ½"
- Bottom mount
Please Log In to view prices

9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)
- Top mount
- 1-15/16” shield height
- 3/4” chassis hole required
- 1-1/8” mounting centers
- Includes shield
Please Log In to view prices

Belton 9-pin tube socket specifically designed for auto-wave soldering. Applicable for all types of electronic equipment using vacuum tubes.
Features:
- 3/4” PC hole
- 1-1/8” mounting centers
Features:
- Safety attachment with 3 positions of mounting pins
- Easy mount with the precise designed tube pins
- Glassfiber filled PPS insulating material
Please Log In to view prices

Rubber ring for retainer S-H141 fits EL34/5881 and 6L6GC tubes. Outer Diameter: 1.38" Inner Diameter: 1.00" Thickness: 0.16"
Please Log In to view prices

Vacuum tube base clip. Grips tube base with teeth to securely hold tube in place. For use with octal sockets with 1-½" mounting centers.
Please Log In to view prices

For use with guitar amps and applications where KT88/6550 is suspended upside down in the chassis.
Please Log In to view prices

8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.
*Uses P-SH12-1-31 or P-SH2-104-2
- 1-1/8” / 1.14” chassis hole required
- Snap-in Mounting
*Uses P-SH12-1-31 or P-SH2-104-2
Please Log In to view prices