Vacuum Tube Accessories

P-H-DRNG-X Damper Rings - High Temperature Silicone, Red
High temperature silicone damper / dampener rings great for remedying microphonic oscillations and tube rattle. These red dampening rings are rated for temperatures up to 240°C and come in various sizes to fit a variety of tubes. Please verify your tube sizes to ensure a proper fit.
  • 20mm: Recommended size for 12A_7 (i.e. 12AX7, 12AT7, 12AU7, etc.) types, EL84, or any other tube with a ~20mm diameter.
  • 28mm: Recommended size for 6V6, 6SN7, 5AR4, or any other tube with a ~28mm diameter.
  • 30mm: Recommended size for some EL34, Svetlana EL34, JJ GZ34, Gold Lion KT77, or any other tube with a ~30mm diameter.
  • 32mm: Recommended size for some EL34, 6L6, 6CA7, or any other tube with a ~32mm diameter.
  • 35mm: Recommended size for 6L6GC, 5U4G, 6146B, or any other tube with a ~35mm diameter.
Please Log In to view prices
P-YJ20 Tube Converter - Yellow Jacket®, YJ20
The YJ20 is for use in most amplifiers using 6V6 output tubes. The YJ20 is similar to the YJC but does not drop the plate and screen voltages. It is meant for use in lower power output amps (20 watts or less) when no power reduction is desired. The ground wire connects to the chassis-ground for cathode-biased amplifiers. All Yellow Jacket® converters come with JJ Brand EL84/6BQ5 vacuum tubes.
  • All Yellow Jacket® converters come with JJ Brand EL84/6BQ5 vacuum tubes.
  • Converts most audio amplifiers with 6V6s and similar-based tubes to EL84s without modification or rebiasing.
  • Converts: Class AB to Class A operation
  • Drops Output Power: Does not drop power.
  • Safe for all common amplifiers and transformers.

Yellow Jacket® converters are a type of specialized adapter which permit the use of EL84/6BQ5 power tubes in place of 6V6, 6L6, EL34, and 7591 type vacuum tubes.
Please Log In to view prices
P-ST9-301 Socket - 9 Pin, Ceramic with Center Shield
9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes
  • Bottom mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers
Please Log In to view prices
P-ST8-193X Socket - 8 Pin Octal, Ceramic PC Mount
8-pin ceramic stand-off tube socket commonly used for octal based power, preamp, and rectifier tubes.
  • PC mount
  • 1” tail diameter
  • Available with standard or gold pins
Please Log In to view prices
S-B120X Egg Crate - for Storing Vacuum Tubes
15 x 15" egg crate packing box designed for storing tubes. Supplied unassembled. Each size is capable of holding a different number of tubes. For cartons see S-B127X
Please Log In to view prices
P-SAYJ-SHORT Tube Converter - Yellow Jacket®, YJShort, Converter Only
Converter-only version of the P-YJShort. Tubes not included. Requires an EL84 vacuum tube, such as:
  • T-EL84-EH (Electro-Harmonix)
  • T-EL84-GEN (Genalex)
  • T-EL84-JJ (JJ Electronic)
  • T-EL84-MUL (Mullard)
  • T-EL84-MP-PV (Peavey)
  • T-EL84-S-MP-GT (Groove Tubes)
  • T-EL84-SOVT (Sovtek)
  • T-EL84-TAD (Tube Amp Doctor)
  • T-EL84-TUNG (Tung-Sol)
  • T-EL84_6BQ5 (NOS)
  • T-EL844-JJ (JJ Electronic EL844)
  • T-EL84M-SOVT (Sovtek EL84M)

We also sell an EL84 sampler set containing 9 EL84 tubes:
  • T-EL84-SET

The YJShort is shorter than the standard YJS converter, allowing for use in amps that do not have room for the standard converters.
Please Log In to view prices
P-SS9-162 Tube Shield - 9 Pin Miniature, 1-½" Tall with Bayonet Base
Made in China. Aluminum tube shield (with base), spring loaded, for short 9 pin miniature tubes like NOS 6386 with 1.50" seated height. (Too short to fit more common 9 pin miniature tubes like 12AX7 with 1.94" seated height).
Please Log In to view prices
P-TB9-2-2 Terminal Board - two 9 Pin sockets, 2 x 12 lugs
Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
Please Log In to view prices
P-ST9-162 Socket - 9 Pin Miniature, Ceramic Base, Aluminum Shield
9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount
  • 1-15/16” shield height
  • 7/8” chassis hole required
  • 1-1/8” mounting centers
  • Includes shield
Please Log In to view prices
P-YJC Tube Converter - Yellow Jacket®, YJC
The YJC is similar to the YJS, but for use in amps with cathode-biased power tubes. Cathode-biased power tubes have a bias resistor connected from their cathode to ground. The ground wire of the YJC is used to bypass the amp’s cathode bias components so the Yellow Jacket® converter’s internal bias components are used instead. All Yellow Jacket® converters come with JJ Brand EL84/6BQ5 vacuum tubes.
  • All Yellow Jacket® converters come with JJ Brand EL84/6BQ5 vacuum tubes.
  • Converts most audio amplifiers with 6L6s, EL34s, 6550s, or 6V6s and similar-based tubes to EL84s without modification or rebiasing.
  • Converts: Class AB to Class A operation
  • Drops Output Power: 50% to 70%.
  • Safe for all common amplifiers and transformers.

Yellow Jacket® converters are a type of specialized adapter which permit the use of EL84/6BQ5 power tubes in place of 6V6, 6L6, EL34, and 7591 type vacuum tubes.
Please Log In to view prices
P-ST9-400 Socket - 9 Pin, Miniature, Ceramic, Chassis Mount
9-pin tube socket commonly used for preamp tubes or EL84 power tubes
  • Bottom mount
  • 1-15/16” shield height
  • 25/32”/ .76” chassis hole required
  • 1-1/8” mounting centers
Please Log In to view prices
P-ST8-209MIP Socket - Belton, Micalex, 8 pin octal, MIP
High insulated 8-pin tube socket commonly used for octal power tubes. Fits 1 3/16" to 1 1/4" chassis hole diameter. Applicable for use in all types of electric and electronic equipment using vacuum tubes. Features:
  • Panel saddle mounting
  • Easy mount with the saddle of extruded screw hole
  • Phosphorus bronze terminal pin with solder plating
  • Glassfiber filled PPS insulating material.
Please Log In to view prices
S-H142-A Tube Clip - Octal, Sold individually
Vacuum tube base clip. Grips tube base with teeth to securely hold tube in place. For use with octal sockets with 1-½" mounting centers.
Please Log In to view prices
P-SAYJ-TRIODE Tube Converter - Yellow Jacket®, YJS, Triode Version, converter only
Converter-only version of the P-YJS-T. Tubes not included. Requires an EL84 vacuum tube, such as:
  • T-EL84-EH (Electro-Harmonix)
  • T-EL84-GEN (Genalex)
  • T-EL84-JJ (JJ Electronic)
  • T-EL84-MUL (Mullard)
  • T-EL84-MP-PV (Peavey)
  • T-EL84-S-MP-GT (Groove Tubes)
  • T-EL84-SOVT (Sovtek)
  • T-EL84-TAD (Tube Amp Doctor)
  • T-EL84-TUNG (Tung-Sol)
  • T-EL84_6BQ5 (NOS)
  • T-EL844-JJ (JJ Electronic EL844)
  • T-EL84M-SOVT (Sovtek EL84M)

We also sell an EL84 sampler set containing 9 EL84 tubes:
  • T-EL84-SET

The YJS is a specialized, current-limiting/voltage-conditioning adapter for use in most 20 to 100 watt amps that use 6L6, EL34, 6550 or 6V6 output tubes. The YJS is for amps with fixed bias power tubes. (Fixed bias tubes have their cathode connected directly to ground and a negative DC voltage applied to their control grid).
Please Log In to view prices
P-SS9-400 Tube Shield - High Quality, Fits P-ST9-700 with Spring
New production, aluminum, 2" tall, for use with P-ST9-700 and P-ST9-700-PC.
Please Log In to view prices
S-B247X Tube Boxes - generic, for storing vacuum tubes
Heavy plain white boxes with dividers to cushion tube. Minimum order of 10 per size.
Please Log In to view prices
P-ST9-165 Socket - 9 Pin, Ceramic Base with Aluminum Shield
9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)
  • Top mount
  • 1-15/16” shield height
  • 3/4” chassis hole required
  • 1-1/8” mounting centers
  • Includes shield
Please Log In to view prices
P-YJSHORT Tube Converter - Yellow Jacket®, YJShort
The YJShort is shorter than the standard YJS converter, allowing for use in amps that do not have room for the standard converters. It is a specialized, current-limiting/voltage-conditioning adapter for use in most 20 to 100 watt amps which use 6L6, EL34, 6550 or 6V6 output tubes. All Yellow Jacket® converters come with JJ Brand EL84/6BQ5 vacuum tubes.
  • All Yellow Jacket® converters come with JJ Brand EL84/6BQ5 vacuum tubes.
  • Converts most audio amplifiers with 6L6s, EL34s, 6550s, or 6V6s and similar-based tubes to EL84s without modification or rebiasing.
  • Converts: Class AB to Class A operation
  • Drops Output Power: 50% to 70%.
  • Safe for all common amplifiers and transformers.

Yellow Jacket® converters are a type of specialized adapter which permit the use of EL84/6BQ5 power tubes in place of 6V6, 6L6, EL34, and 7591 type vacuum tubes.
Please Log In to view prices
P-ST9-600 Socket - Belton, 9 Pin, Miniature, Top Mount
9 pin miniature Belton socket. Applicable for use with all types of electric and electronic equipment using vacuum tubes.
  • Paddle saddle mounting
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Easy mount with collar attached socket
  • 1-⅛" mounting centers
  • Fits ¾" chassis hole
  • Top mount
Please Log In to view prices
P-ST8-209MIPPCL Socket - Belton, Micalex, 8 Pin, Octal PC Mount, Long Lead
Belton 8-pin Micalex PC mount tube socket with long leads commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes.
  • Convenient top or bottom mount capabilities
  • 1-1/4” chassis hole required
  • 1-1/2” oblong mounting centers

Features:
  • Paddle saddle mounting
  • Easy mount with the saddle of extruded screw hole
  • Phosphorous bronze pin terminal with tin plating
  • Glassfiber filled PPS Insulating material
  • Long leads
Please Log In to view prices
T-7199-ADT-SET Adapter - use 6GH8A Instead of 7199 tube, 6GH8A Included
Package of 2
Includes:
  • (1) T-7199-ADT
  • (1) T-6GH8A
Please Log In to view prices
P-ST9-213 Socket - 9 Pin, Miniature, with Shielded Base
9-pin phenolic tube socket with attached shield base.
  • Top mount
  • 3/4” chassis hole required
  • 1-1/8” mounting centers

Please Note: Tube retainer S-H144 will not work with this socket
Please Log In to view prices
P-ST8-209MIP-EPC Socket - Belton, Micalex, 8-Pin Octal, MIP, Flanged Holes
Belton 8-pin Micalex tube socket commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes. This version has circular extruded holes.
Please Log In to view prices
P-SS9-601 Tube Shield - 2", Chinese manufacture
2" tall, for use with P-ST9-AWS or P-ST9-AWS-CHINA
Please Log In to view prices