Vacuum Tube Accessories
Adapter - Adapts 6GH8A to use Instead of 7199 Tube
This adapter allows you to convert 6GH8A tubes to use instead of the hard to find 7199, T-6GH8A not included.
Adapter - use 6GH8A Instead of 7199 tube, 6GH8A Included
Package of 2Includes:
- (1) T-7199-ADT
- (1) T-6GH8A
Bracket - for 8 Pin vacuum tube sockets
Washer fits around the socket in in order to hold it to the chassis. for 8 pin sockets.
Bracket - for 9 Pin vacuum tube socket
Washer fits around sockets to hold them to chassis.
Carton - for tube egg crates, 15" x 15"
Cartons to hold tube egg crates S-B123, S-B124, S-B125, and S-B126. All sizes will fit the crates, but you may want additional vertical clearance for taller tubes. See S-B120X for the tube egg crate inserts
Covers - for Chassis Socket Hole, Steel
Steel plates for covering unused socket holes on modified chassis. These covers provide a safe solution for modifying any chassis. These covers use elongated mounting holes to fit a variety of socket hole sizes. P-ST9-CVR
- 9 pin (noval) socket hole cover
- 5mm x 3.5mm mounting holes
- 27.1mm center to center
- 8 pin (octal) socket hole cover
- 6.5mm x 3.5mm mounting holes
- 40mm center to center
- 8 pin to 9 pin (octal to noval) socket adapter
- Bottom mount 9 pin socket recommended
Damper Rings - High Temperature Silicone, Red
High temperature silicone damper / dampener rings great for remedying microphonic oscillations and tube rattle. These red dampening rings are rated for temperatures up to 240°C and come in various sizes to fit a variety of tubes. Please verify your tube sizes to ensure a proper fit.
- 20mm: Recommended size for 12A_7 (i.e. 12AX7, 12AT7, 12AU7, etc.) types, EL84, or any other tube with a ~20mm diameter.
- 28mm: Recommended size for 6V6, 6SN7, 5AR4, or any other tube with a ~28mm diameter.
- 30mm: Recommended size for some EL34, Svetlana EL34, JJ GZ34, Gold Lion KT77, or any other tube with a ~30mm diameter.
- 32mm: Recommended size for some EL34, 6L6, 6CA7, or any other tube with a ~32mm diameter.
- 35mm: Recommended size for 6L6GC, 5U4G, 6146B, or any other tube with a ~35mm diameter.
Egg Crate - for Storing Vacuum Tubes
15 x 15" egg crate packing box designed for storing tubes. Supplied unassembled. Each size is capable of holding a different number of tubes. For cartons see S-B127X
Grid / Plate Anode Cap - Ceramic for tubes
Diameter listed is the inside diameter. The anode cap is used for making an electrical connection to vacuum tubes which have anode high voltage connection from the top. Its contact resistance is less than 0.01 ohm, insulation resisitance is over 10,000 Mohm. Life time is about 200 cycles.
Keyway - Replacement piece for octal tubes
Package of 4Do you have valuable octal type tubes that work fine except the keyway has been broken off the base? Fix it with this simple and inexpensive product. Simply clean the remainder of the broken keyway from the base and slip one of these on. Will stay on by itself, or you can use a dab of silicon to attach if you wish.
Mounting Plate - for wavy washer sockets
When hole in chassis is too large to mount Type S sockets directly to chassis with wavy washer, this adapter can be used. 1 3/16" dia. opening in plate, 1 ½" to about 1 7/8" mounting centers can be used. Socket is secured to plate with wavy washer.
Plug - 8-Pin octal tube base, Black Plastic
Black plastic 8-pin plug. This is the bottom portion of an octal tube base including all 8 pins and guide key between pins 1 and 8.
Retainer - fits EL34 / 5881 and 6L6GC Tubes
For use with guitar amps and applications where tube is suspended upside down in chassis. Use with suspended 5881, 6L6, and EL34 tubes.
Retainer - Fits KT88 / 6550 Size Tubes
For use with guitar amps and applications where KT88/6550 is suspended upside down in the chassis.
Ring for Retainer - rubber, fits EL34 / 5881 and 6L6GC Tubes
Rubber ring for retainer S-H141 fits EL34/5881 and 6L6GC tubes. Outer Diameter: 1.38" Inner Diameter: 1.00" Thickness: 0.16"
Ring for Retainer - rubber, fits KT88 and 6550 Tubes
Rubber ring for retainer S-H143 fits KT88 and 6550 tubes. Dampens vibration.
Socket - 4 Pin, Ceramic Plate, bottom-mount
Bottom mount ceramic socket has bossed mounting holes and recessed rivets to allow sub-panel mounting. Socket fits 300B, 811 size tubes.
Socket - 4 Pin, Ceramic, Bayonet, China
4-pin ceramic bayonet socket used for 300B and 811 tubes.
- Top mount
- 2" mounting centers
Socket - 4 Pin, Ceramic, Chassis Mount
4-pin ceramic tube socket.
- Bottom mount
- 1-1/4” chassis hole required
- 1-1/2” mounting centers
Socket - 4 Pin, Jumbo, Ceramic Bayonet4-pin jumbo ceramic bayonet socket used for 211 and 845 tubes.
- Top mount
- 2-13/16" mounting centers
- Available with standard or gold plated pins
Socket - 5 Pin, Ceramic Plate, bottom mount
5-pin ceramic plate socket used for 807 tubes.
- Bottom mount
- 1" to 1 ¼" chassis hole required
- 1 ¾" mounting centers
- UY-Base, 5 Pins
Socket - 7 Pin, Ceramic for 1625, bottom mount
7-pin ceramic plate socket used for 1625 tubes. Bossed mounting holes and recessed rivets allow sub-panel mounting .
- Bottom mount
- 1”- 1 ¼" chassis hole required
- 1-13/16” oblong mounting centers
Socket - 7 Pin, Large, Ceramic for 813, Chinese
7-pin ceramic plate socket used for 813 tubes. Bossed mounting holes and recessed rivets allow sub-panel mounting. Made in China
- Bottom mount
- 1 ¼" chassis hole required
- 1-⅞" x 1-⅞" oblong mounting centers