Vacuum Tube Accessories

5-pin ceramic plate socket used for 807 tubes.

• Bottom mount
• 1" to 1 ¼" chassis hole required
• 1 ¾" mounting centers
• UY-Base, 5 Pins

9-pin ceramic tube socket with center shield lug and PC pins commonly used for preamp tubes or EL84 power tubes

• PC mount
• 7/8” chassis hole required
• ⅞" tail diameter

9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes. Features:

• Top mount
• 3/4” tail diameter
• 1-1/8” mounting center

8-pin ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Can be top mounted or bottom mounted, using unique ring mount. Great replacement for Fender, Marshall and others.

• Convenient top or bottom mount capabilities
• Includes mounting bracket
• 1-1/16” to 1-1/8” chassis hole required
• 1-7/16” oblong mounting centers

8-pin premium ceramic tube socket commonly used for octal based power, preamp, and rectifier tubes. Can be top mounted or bottom mounted, using unique ring mount. Great replacement for Fender, Marshall and others.

• Premium quality
• Convenient top or bottom mount capabilities
• Includes mounting bracket
• 1-1/16” chassis hole required
• 1-7/16” oblong mounting centers

9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes

• Top mount
• 3/4” chassis hole required
• 1-1/8” mounting centers

Please note: This socket will not work with tube retainer S-H144

9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes (without shield)

• Top mount with PC pins
• 1-15/16” shield height
• 7/8” chassis hole required
• 1” mounting centers
• 13/16” tail diameter
• Includes shield

Cartons to hold tube egg crates S-B123, S-B124, S-B125, and S-B126. All sizes will fit the crates, but you may want additional vertical clearance for taller tubes. See S-B120X for the tube egg crate inserts

9-pin ceramic tube socket with gold pins commonly used for preamp tubes or EL84 power tubes

• PC mount
• 7/8” tail diameter
• Gold pins

The YJShort is shorter than the standard YJS converter, allowing for use in amps that do not have room for the standard converters. It is a specialized, current-limiting/voltage-conditioning adapter for use in most 20 to 100 watt amps which use 6L6, EL34, 6550 or 6V6 output tubes

Washer fits around the socket in in order to hold it to the chassis. for 8 pin sockets.

Ceramic Tube socket used for octal power tubes, PC mount

• Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/8”, Bottom: 1-1/4”)
• Mounting Centers: 1-1/2” with oblong mounting holes
• PC mount pins

8 pin socket saver with bracket. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.

8-pin octal base made of brown phenolic. This base is shorter than the P-SP8-479 base and matches bases used on many common octal tubes. The base has a 5/8“ height with approximately 7/16” of internal mounting depth.

7-pin ceramic plate socket used for 1625 tubes. Bossed mounting holes and recessed rivets allow sub-panel mounting .

• Bottom mount
• 1”- 1 ¼" chassis hole required
• 1-13/16” oblong mounting centers

7-pin tube socket with shield base commonly used for preamp tubes

• Top mount
• 5/8” chassis hole required
• 7/8” mounting centers
• Shield Base

This adapter allows you to use 6GH8A or 6U8A tubes in place of the difficult-to-find 7199. Tubes are not included.

Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.

The YJS is a specialized, current-limiting/voltage-conditioning adapter for use in most 20 to 100 watt amps that use 6L6, EL34, 6550 or 6V6 output tubes. The YJS is for amps with fixed bias power tubes. (Fixed bias tubes have their cathode connected directly to ground and a negative DC voltage applied to their control grid).

2" tall, for use with P-ST9-AWS or P-ST9-AWS-CHINA

Replacement 4-pin tube base for use with tubes such as the 811A or 300B.

The YJUni is a simple pin-converting adapter for use in most amps with 6V6 or similar based tubes like 6F6, 6G6, 6K6, 6Y6, etc. The YJUni is shorter than standard Yellow Jacket® converters. It is designed for use in lower power output amps (20 watts or less) when no power reduction is desired.

Replacement foam tube stabilizer for Fender® Hot Rod Deluxe and Hot Rod Deville amps. This foam block slides over the first two preamp tubes. This genuine Fender® replacement is made in the USA.

Made in China. Aluminum tube shield (with base), spring loaded, for short 9 pin miniature tubes like NOS 6386 with 1.50" seated height. (Too short to fit more common 9 pin miniature tubes like 12AX7 with 1.94" seated height).