Vacuum Tube Accessories

7-pin ceramic plate socket used for 1625 tubes. Bossed mounting holes and recessed rivets allow sub-panel mounting .

• Bottom mount
• 1”- 1 ¼" chassis hole required
• 1-13/16” oblong mounting centers

Replacement 4-pin tube base for use with tubes such as the 811A or 300B.

9-pin ceramic tube socket with gold pins commonly used for preamp tubes or EL84 power tubes

• PC mount
• 7/8” tail diameter
• Gold pins

8-pin phenolic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• Top mount
• 1” to 1-1/8” chassis hole required
• 1-1/2” mounting centers

8-pin phenolic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• Top mount
• 1 3/16" to 1 ¼".chassis hole required
• 1-1/2” mounting centers

*Please Note: The S-H142 tube clip is not compatible with this socket.

Plastic octal tube socket commonly used for power tubes in many amps.

• Chassis hole: 1 ⅛"
• Mounting Centers: 1 ½"
• Bottom mount

4-pin ceramic tube socket.

• Bottom mount
• 1-1/4” chassis hole required
• 1-1/2” mounting centers

8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• Bottom mount
• Includes mounting bracket
• 1” chassis hole required
• 1 ¼" mounting centers

8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• Top mount
• 1-1/16” chassis hole required
• 1 ½" mounting centers

Used for vacuum tube octal plug or coil form. 1-¼" dia. x 7/8" high.

8-pin octal base made of brown phenolic. This base is shorter than the P-SP8-479 base and matches bases used on many common octal tubes. The base has a 5/8“ height with approximately 7/16” of internal mounting depth.

8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• 1-1/8” / 1.14” chassis hole required
• Snap-in Mounting

*Uses P-SH12-1-31 or P-SH2-104-2

High insulated 8-pin tube socket commonly used for octal power tubes. Fits 1 3/16" to 1 1/4" chassis hole diameter. Applicable for use in all types of electric and electronic equipment using vacuum tubes. Features:

• Panel saddle mounting
• Easy mount with the saddle of extruded screw hole
• Phosphorus bronze terminal pin with solder plating
• Glassfiber filled PPS insulating material.

Belton micalex tube socket commonly used for preamp tubes or EL84 power tubes

• Fits ¾" chassis hole diameter
• See P-SS9-400 for a compatible tube shield

Ceramic Tube socket used for octal power tubes.

• Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/16”, Bottom: 1-1/4”)
• Mounting Centers: 1-1/2” with oblong mounting holes

Ceramic Tube socket used for octal power tubes.

• Chassis hole: 1” to 1-5/32” depending on mounting (Top: 1” Bottom: 1-5/32”)
• Mounting Centers: 1-1/2” with oblong mounting holes

Single row turret strips with a tab for mounting directly to tube socket mounting holes. The screw mount turrets are made of gold plated brass and are pre-mounted to the 2mm thick boards. The mounting hole is 0.15” in diameter. These turret strips are a great option for components connecting to the socket lugs of point to point builds.

9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes (without shield)

• Top mount with PC pins
• 1-15/16” shield height
• 7/8” chassis hole required
• 1” mounting centers
• 13/16” tail diameter
• Includes shield

Ceramic Tube socket used for octal power tubes, PC mount

• Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/8”, Bottom: 1-1/4”)
• Mounting Centers: 1-1/2” with oblong mounting holes
• PC mount pins

Belton 8-pin tube socket specifically designed for auto-wave soldering .Applicable for all types of electronic equipment using vacuum tubes.

• 1-3/16” chassis hole required
• Mounting centers are 1 ½", 1 13/16"

Features:

• Safety attachment with 3 positions of mounting pins
• Easy mount with the precise designed tube pins
• Glassfiber filled PPS insulating material

Steel plates for covering unused socket holes on modified chassis. These covers provide a safe solution for modifying any chassis. These covers use elongated mounting holes to fit a variety of socket hole sizes. P-ST9-CVR

• 9 pin (noval) socket hole cover
• 5mm x 3.5mm mounting holes
• 27.1mm center to center

P-ST8-CVR

• 8 pin (octal) socket hole cover
• 6.5mm x 3.5mm mounting holes
• 40mm center to center

P-ST8-ST9-CNVRT

• 8 pin to 9 pin (octal to noval) socket adapter
• Bottom mount 9 pin socket recommended

Belton 8-pin Micalex PC mount tube socket with long leads commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes.

• Convenient top or bottom mount capabilities
• 1-1/4” chassis hole required
• 1-1/2” oblong mounting centers

Features:

• Paddle saddle mounting
• Easy mount with the saddle of extruded screw hole
• Phosphorous bronze pin terminal with tin plating
• Glassfiber filled PPS Insulating material
• Long leads

9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)

• Top mount
• 1-15/16” shield height
• 7/8” chassis hole required
• 1-1/8” mounting centers
• Includes shield

Belton 8-pin Micalex tube socket commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes. This version has circular extruded holes.