Vacuum Tube Accessories

Ceramic 7-pin socket with center shield and mounting bracket.

• Convenient top or bottom mounting capabilities
• 5/8” chassis hole required
• 7/8” mounting centers

9-pin ceramic tube socket with center shield lug and PC pins commonly used for preamp tubes or EL84 power tubes

• PC mount
• 7/8” chassis hole required
• ⅞" tail diameter

7-pin tube socket commonly used for preamp tubes. Shield Included.

• Top mount
• 1-7/8” shield height
• 5/8” chassis hole required
• 7/8” mounting centers
• Includes Shield

Ceramic tube socket commonly used for preamp tubes or EL84 power tubes.

• Chassis hole: 7/8”
• Mounting Centers: 1-1/8”
• Bottom or top mount

7-pin ceramic tube socket with PC pins commonly used for tubes such as the 6X4 rectifier.

• PC mount
• 11/16” chassis hole required
• 11/16" tail diameter

9-pin tube socket commonly used for preamp tubes or EL84 power tubes (without shield)

• Top mount
• 1-15/16” shield height
• 7/8” chassis hole required
• 1-1/8” mounting centers
• Includes shield

8-pin phenolic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• Top mount
• 1 3/16" to 1 ¼".chassis hole required
• 1-1/2” mounting centers

*Please Note: The S-H142 tube clip is not compatible with this socket.

4-pin ceramic tube socket.

• Bottom mount
• 1-1/4” chassis hole required
• 1-1/2” mounting centers

Belton 8-pin Micalex PC mount tube socket with long leads commonly used for octal based power, preamp, and rectifier tubes. Applicable for use with all types of electronic equipment using vacuum tubes.

• Convenient top or bottom mount capabilities
• 1-1/4” chassis hole required
• 1-1/2” oblong mounting centers

Features:

• Paddle saddle mounting
• Easy mount with the saddle of extruded screw hole
• Phosphorous bronze pin terminal with tin plating
• Glassfiber filled PPS Insulating material
• Long leads

9-pin ceramic tube socket with stand-off mounting. commonly used for preamp tubes or EL84 power tubes.

• Standoff, PC mount
• 0.822” outer diameter
• 3/4” tail diameter

8 pin octal socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.

Belton 8-pin tube socket specifically designed for auto-wave soldering .Applicable for all types of electronic equipment using vacuum tubes.

• 1-3/16” chassis hole required
• Mounting centers are 1 ½", 1 13/16"

Features:

• Safety attachment with 3 positions of mounting pins
• Easy mount with the precise designed tube pins
• Glassfiber filled PPS insulating material

9 pin miniature socket saver. Commonly used in tube testers. Socket savers absorb the main wear and tear from many tube insertions and removals. It's much easier to replace a worn out socket saver than to replace the original socket.

9-pin tube socket commonly used for preamp tubes or EL84 power tubes

• Bottom mount
• 1-15/16” shield height
• 25/32”/ .76” chassis hole required
• 1-1/8” mounting centers

When hole in chassis is too large to mount Type S sockets directly to chassis with wavy washer, this adapter can be used. 1 3/16" dia. opening in plate, 1 ½" to about 1 7/8" mounting centers can be used. Socket is secured to plate with wavy washer.

Ceramic Tube socket used for octal power tubes, PC mount

• Chassis hole: 1” to 1-1/4” depending on mounting (Top: 1” to 1-1/8”, Bottom: 1-1/4”)
• Mounting Centers: 1-1/2” with oblong mounting holes
• PC mount pins

8-pin plastic tube socket commonly used for octal based power, preamp, and rectifier tubes.

• Top mount
• 1-1/16” chassis hole required
• 1 ½" mounting centers

9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes.

• Top mount
• 3/4” chassis hole required
• 1” mounting centers

Works with P-ST8-810 for mounting without screws.

9-pin plastic tube socket commonly used for preamp tubes or EL84 power tubes

• PC mount
• ¾” chassis hole required (bottom mount)
• 3/4” tail diameter

9-pin Micalex tube socket commonly used for preamp tubes or EL84 power tubes. Applicable for use with all types of electronic equipment using vacuum tubes. Features:

• Top mount
• 3/4” tail diameter
• 1-1/8” mounting center

9-pin ceramic tube socket with center shield commonly used for preamp tubes or EL84 power tubes

• Top mount
• 3/4” chassis hole required
• 1-1/8” mounting centers

9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes (without shield)

• Top mount with PC pins
• 1-15/16” shield height
• 7/8” chassis hole required
• 1” mounting centers
• 13/16” tail diameter
• Includes shield

9-pin phenolic tube socket with attached shield base.

• Top mount
• 3/4” chassis hole required
• 1-1/8” mounting centers

Please Note: Tube retainer S-H144 will not work with this socket