New production, aluminum, 2" tall, for use with P-ST9-700 and P-ST9-700-PC.

Protect your preamp tubes and customize them to suit your style with these colorful aluminum tube shields.

Grips tube base with 'teeth' to securely hold tube in place. For use with octal sockets with 1-1/2" mounting centers. Super high quality. Spring plate with Nickel plating. Please Note: This tube clip will not work with socket P-ST8-500

For use with guitar amps and applications where tube is suspended upside down in chassis. Use with suspended 5881, 6L6, and EL34 tubes.

Tube retainer for EL84. for use with guitar amps and applications where the tube is suspended upside down in the chassis. Supports a maximum tube height of 2.8 inches

Vacuum tube base clip. Grips tube base with teeth to securely hold tube in place. For use with octal sockets with 1-½" mounting centers.

Rubber ring for retainer S-H141 fits EL34/5881 and 6L6GC tubes. Outer Diameter: 1.38" Inner Diameter: 1.00" Thickness: 0.16"

Retainer (Belton). for use with EL84 tubes, mounts to chassis. Steel plate with nickel plating and natural coil spring. Note: these retainers are for specialized socket below chassis mounting. (See mounting drawing below.) The springs are too short for standard sockets mounted level with the chassis surface.

For use with guitar amps and applications where KT88/6550 is suspended upside down in the chassis.

Extra long (70mm) aluminum tube shield for noval tubes. Ideal for tubes that are longer than a standard preamp tube such as the 6CG7, 12BH7, etc.

• Includes shield base
• Designed for longer than standard pre-amp tubes
• Sold individually
• Compatible with P-ST9-212

Heavy plain white boxes with dividers to cushion tube. Minimum order of 10 per size.

9-pin ceramic tube socket commonly used for preamp tubes or EL84 power tubes

• Bottom, PC mount
• ¾” chassis hole required
• ¾” tail diameter

High insulated 8-pin tube socket commonly used for octal power tubes. Fits 1 3/16" to 1 1/4" chassis hole diameter. Applicable for use in all types of electric and electronic equipment using vacuum tubes. Features:

• Panel saddle mounting
• Easy mount with the saddle of extruded screw hole
• Phosphorus bronze terminal pin with solder plating
• Glassfiber filled PPS insulating material.

Belton micalex tube socket commonly used for preamp tubes or EL84 power tubes

• Fits ¾" chassis hole diameter
• See P-SS9-400 for a compatible tube shield

High temperature silicone damper / dampener rings great for remedying microphonic oscillations and tube rattle. These red dampening rings are rated for temperatures up to 240°C and come in various sizes to fit a variety of tubes. Please verify your tube sizes to ensure a proper fit.

• 20mm: Recommended size for 12A_7 (i.e. 12AX7, 12AT7, 12AU7, etc.) types, EL84, or any other tube with a ~20mm diameter.
• 28mm: Recommended size for 6V6, 6SN7, 5AR4, or any other tube with a ~28mm diameter.
• 30mm: Recommended size for some EL34, Svetlana EL34, JJ GZ34, Gold Lion KT77, or any other tube with a ~30mm diameter.
• 32mm: Recommended size for some EL34, 6L6, 6CA7, or any other tube with a ~32mm diameter.
• 35mm: Recommended size for 6L6GC, 5U4G, 6146B, or any other tube with a ~35mm diameter.

9 pin miniature Belton socket. Applicable for use with all types of electric and electronic equipment using vacuum tubes.

• Paddle saddle mounting
• Phosphorous bronze pin terminal with tin plating
• Glassfiber filled PPS Insulating material
• Easy mount with collar attached socket
• 1-⅛" mounting centers
• Fits ¾" chassis hole
• Top mount

(Belton) Micalex, 9 pin miniature socket with PC pins, stand off mounting. Fits 3/4" chassis hole diameter (bottom mount). Applicable for use with all types of electric and electronic equipment using vacuum tubes. Features:

• Paddle saddle mounting
• Phosphorous bronze pin terminal with tin plating
• Glassfiber fileld PPS Insulating material
• Easy mount with collar attached socket