Transistors

NPN low noise transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = 45 V
• Max collector to base voltage = 45 V
• Max emitter to base voltage = 6.5 V
• Max collector current = 0.2 A (continuous)

The BC183A transistors manufactured by ITT. The BC183A is a general purpose NPN transistor in a TO-92 case. It is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. A version of the BC183A, the BC183KA can be found in some vintage Fuzz Face pedals.

The 2N5172 is a silicon general purpose NPN transistor in a TO-92 package. The 2N5172’s typical applications include general purpose amplification and switching.

High voltage medium-power ZTX457 transistor.
Features:

• 300 Volt Collector-Emitter Voltage
• 300 Volt Collector-Base Voltage
• 0.5 Amp continuous current
• 1 Watt Maximum Power Dissipation
  

2N5459 N-channel JFET in a TO-92 package. The 2N5459 is an N−channel junction field effect transistors, depletion mode (Type A), designed for audio and switching applications. Features

• N−Channel for Higher Gain
• Drain and Source Interchangeable
• High AC Input Impedance
• High DC Input Resistance
• Low Transfer and Input Capacitance
• Low Cross−Modulation and Intermodulation Distortion

2SC828 NPN silicon transistors made by Panasonic. The 2SC828 is a popular NPN choice for fuzz pedals and can be found in vintage effects such as Super-Fuzz and Uni-Vibe pedals.

The BC184 is a general purpose NPN transistor in a TO-92 case. The BC184 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. BC184 was used in various Colorsound pedals - Jumbo Tone Bender, Supa Tone Bender, Power Boost, etc. It was also used in the Schaller Fuzz, and has been used in fuzz pedals from well-known builders such as Skreddy Pedals, D*A*M, and Stu Castledine.

General purpose low-power NPN bipolar junction transistor, used frequently in hobbyist electronic projects. This version is lead free.
For a lead free 2N3906 see P-Q2N3906-LF.

MPSA14 NPN Darlington transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = 30 V
• Max collector to base voltage = 30 V
• Max emitter to base voltage = 10 V
• Max collector current = 0.5 A (continuous)

The BC338 is a silicon general purpose NPN transistor in a TO-92 package. The BC338’s typical applications include signal processing, amplification, and switching. The BC338 is available in three different gain ranges: BC338-16, BC338-25, and BC338-40. Type hFE Range (IC=100mA, VCE=1V) Typical hFE (IC=100mA, VCE=1V) BC338-16 100-250 160 BC338-25 160-400 250 BC338-40 250-630 400

General purpose low-power PNP bipolar junction transistor, used frequently in hobbyist electronic projects. For the NPN 2N3904 see P-Q2N3904

MPSA63 PNP Darlington transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = -30V
• Max collector to base voltage = -30 V
• Max emitter to base voltage = -10 V
• Max collector current = -0.5 A (continuous)

2N5400 (761), PNP general purpose amp, 120V, 10mA, TO-92 case.

The BC547 is a silicon general purpose NPN transistor in a TO-92 package. The BC547’s typical applications include signal processing, amplification, and switching. The BC547 is available in two different gain ranges: BC547B and BC547C. Type hFE (IC=2mA, VCE=5V) BC547B 200-450 BC547C 420-800

Low noise transistor for audio frequency amplifier applications. Features:

• Switching and amplifier
• Low Noise
• Compliment to P-QBC560

MPS 6531, NPN general purpose amp, 40V, TO-92 Case.

The BC549 is a silicon general purpose NPN transistor in a TO-92 package. The BC549’s typical applications include signal processing, amplification, and switching. The BC549 is available in two different gain ranges: BC549B and BC549C. Type hFE (IC=2mA, VCE=5V) BC549B 200-450 BC549C 420-800

2N6027 programmable unijunction transistor often referred to as a PUT. The 2n6027 can be found in many tremolo effects pedal projects.

J201 N-Channel JFET in a TO-92 package. The J201 is designed primarily for low level audio and general purpose applications with high impedance signal sources.

• Max drain to gate voltage = 40 V
• Max gate to source voltage = -40 V
• Max forward gate current = 50 mA

Designed for full-wave triggering in Triac phase control circuits, half-wave SCR triggering application and as voltage level detectors. Used in most Peavey linear power amplifier designs through 2000 including CS/M/DECA series power amps, IPA300, and all models using 402/602/304S/204S power modules.

• Low Switching Voltage — 8 Volts Typical
• Uniform Characteristics in Each Direction
• Low On-State Voltage — 1.7 Volts Maximum
• Low Off-State Current — 0.1 mA Maximum

The BC558 is a silicon general purpose PNP transistor in a TO-92 package. The BC558’s typical applications include signal processing, amplification, and switching.

2SC945 NPN transistors. This is a silicon NPN transistor in a TO-92 package. The 2SC945 was used in many classic Boss pedals such as the CE-2 chorus.

BC238B NPN transistor in a TO-92 package. The BC238 is used in a variety of vintage pedals such as the Schaller Fuzz, a version of the Brian May treble boost,and later Jen / Tonebender fuzz pedals. The BC238B is a variant of the BC108B and works well in other classic fuzz pedals such as Fuzz Face and Big Muff builds.

PF5102 N-Channel Switch (TO-92 package) - designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.

• Max drain to gate voltage = 40 V
• Max gate to source voltage = -40 V
• Max forward gate current = 50 m