Transistors

2N5400 (761), PNP general purpose amp, 120V, 10mA, TO-92 case.

The BC337 is a silicon general purpose NPN transistor in a TO-92 package. The BC337’s typical applications include signal processing, amplification, and switching. The BC337 is available in three different gain ranges: BC337-16, BC337-25, and BC337-40. Type hFE Range (IC=100mA, VCE=1V) Typical hFE (IC=100mA, VCE=1V) BC337-16 100-250 160 BC337-25 160-400 250 BC337-40 250-630 400

High quality TO package transistor sockets by Mill-Max. These machine pin sockets make swapping transistors in pedals and other projects a simple process. These use a standard TO footprint so they are ready for use on PCBs with matching footprints.

2SD77 NPN germanium transistors. The 2SD77 is a popular NPN for fuzz pedals and other effects. The NPN polarity allows for use with standard pedal power supplies.

MPF102 N-Channel JFET in a TO-92 package. The MPF102 is designed for electronic switching applications such as low ON resistance analog switching.

• Max drain to gate voltage = 25 V
• Max gate to source voltage = -25 V
• Max forward gate current = 10 mA

NPN Darlington transistor (TO-92 package) - designed for applications requiring extremely high current gain at collector currents to 1.0A.

• Max collector to emitter voltage = 30 V
• Max collector to base voltage = 30 V
• Max emitter to base voltage = 10 V
• Max collector current = 1.2 A (continuous)

The 2N4123 is a general purpose silicon NPN transistor in a TO-92 case. The 2N4123 is primarily intended for general purpose amplification. It is a popular choice for silicon fuzz pedals due to its low hFE specifications.

2N404 PNP germanium transistors. The 2N404 is used in many fuzz pedals along with other effects. This transistor is in a TO-5 package with long leads commonly found on germanium transistors. For a higher voltage version of this transistor, see P-Q2N404A.

MOSFET BS170 N-Channel Transistor. Used in MOD® Kits.
Note - this is a fragile component! Use caution not to overheat or break leads.

The BC546 is a silicon general purpose NPN transistor in a TO-92 package. The BC546’s typical applications include signal processing, amplification, and switching. The BC546 is available in two different gain ranges: BC546B and BC546C. Type hFE (IC=2mA, VCE=5V) BC546B 200-450 BC546C 420-800

J113 N-Channel Switch (TO-92 package) - designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.

• Max drain to gate voltage = 35 V
• Max gate to source voltage = -35 V
• Max forward gate current = 50 mA

The BC209C is a silicon NPN transistor in a TO-106 case. The BC209C is primarily intended for general purpose audio applications. BC209C transistors were used in original silicon Fuzz Face® pedals as well as a variety of D*A*M pedals.

This is a set of two 2N1309 germanium transistors that have been hand-selected to work in the germanium Fuzz Face circuit. Also included are 4 metal film resistors to use in the circuit. In most cases, the values have been modified from the stock values slightly to ensure that the collector of Q2 biases to roughly -4.5V. A data sheet containing the schematic and the resistor values is included so that you can use your own resistor type if you would prefer. There is a range of bias voltages that can sound nice in a Fuzz Face, and voltages in original units varied. These transistors have been tested with bias voltage, sound, and noise level in mind. Note that due to a variety of factors such as battery/PSU voltage, temperature, and component tolerance, the voltage on the collector of Q2 may not measure at exactly -4.5V, but it should be close in a properly-built circuit.

2N5088 NPN Bipolar Junction Transistor in TO-92 package

2N508 PNP germanium transistors. The 2N508 is a popular PNP for fuzz pedals and other effects. It can be found in modern classics such as the Sunface. This transistor is in a TO-5 package with long leads commonly found on germanium transistors.

2N4061 PNP transistors. This is a silicon PNP transistor in a TO-92 package. The 2N4061 has been used in a variety of effects pedals and is most notably used in the Zonk Machine II.

Transistor MJ15022, TO-3 Case, NPN PowerBase power transistors designed for high power audio, disk head positioners and other linear applications. Features

• High Safe Operating Area (100% Tested) −2 A @ 80 V
• High DC Current Gain − hFE = 15 (Min) @ IC = 8 Adc

The BC548 is a silicon general purpose NPN transistor in a TO-92 package. The BC548’s typical applications include signal processing, amplification, and switching. The BC548 is available in two different gain ranges: BC548B and BC548C. Type hFE (IC=2mA, VCE=5V) BC548B 200-450 BC548C 420-800

BC109 NPN silicon transistors. The BC109 is a popular NPN choice for fuzz pedals and other effects such as vintage silicon Fuzz Face builds and Big Muff clones. Type hFE (IC=2mA, VCE=5V) hfe (IC=2mA, VCE=5V, f=1KHz) BC109B 200-450 240-500 BC109C 420-800 450-900

The BC182 is a general purpose NPN transistor in a TO-92 case. The BC182 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. The BC182 has a more narrow hFE range than the BC183 which can be helpful for certain builds.

AC162 PNP germanium transistors made by Siemens. The AC162 is a popular PNP transistor among fuzz builders and is a great option for effects that use germanium transistors. This transistor is in a TO-1 package that is unique to Siemens transistors and features the long leads commonly found on germanium transistors.

General purpose low-power NPN bipolar junction transistor, used frequently in hobbyist electronic projects.

2N5459 N-channel JFET in a TO-92 package. The 2N5459 is an N−channel junction field effect transistors, depletion mode (Type A), designed for audio and switching applications. Features

• N−Channel for Higher Gain
• Drain and Source Interchangeable
• High AC Input Impedance
• High DC Input Resistance
• Low Transfer and Input Capacitance
• Low Cross−Modulation and Intermodulation Distortion

2N169 NPN germanium transistors in an oval package. The oval package is sometimes referred to as a top hat package. The 2N169 is a popular NPN for fuzz pedals and other effects. The NPN polarity allows for use with standard pedal power supplies.