Transistors

Transistor - 2N1711, Silicon, TO-39 case, NPN
The 2N1711 is a silicon planar epitaxial NPN transistor in a TO-39 metal case. It is intended for use in high performance amplifiers, oscillators and switching circuits. The 2N1711 is a great choice for amplifiers where low noise is an important factor.
Please Log In to view prices
Transistor - MJ15015, NPN, Complementary High-Power
Transistor MJ15015, TO-3 Case, NPN
PowerBase complementary transistors designed for high power audio, stepping motor and other linear applications. These devices can also be used in power switching circuits such as relay or solenoid drivers, dc–to–dc converters, inverters, or for inductive loads requiring higher safe operating areas.
Safe Operating Area - Rated to 60V
Please Log In to view prices
Transistor - 2N2907, Silicon, TO-18 case, PNP
The 2N2907 is a silicon planar epitaxial PNP transistor in a TO-18 metal case type. The 2N2907 is designed for use in high speed saturated switching and general purpose applications.
Please Log In to view prices
Transistor - BC338, General Purpose, TO-92 case, NPN
The BC338 is a silicon general purpose NPN transistor in a TO-92 package. The BC338’s typical applications include signal processing, amplification, and switching. The BC338 is available in three different gain ranges: BC338-16, BC338-25, and BC338-40. Type hFE Range (IC=100mA, VCE=1V) Typical hFE (IC=100mA, VCE=1V) BC338-16 100-250 160 BC338-25 160-400 250 BC338-40 250-630 400
Please Log In to view prices
Transistor - MJ15022, NPN, Power Transistor
Transistor MJ15022, TO-3 Case, NPN PowerBase power transistors designed for high power audio, disk head positioners and other linear applications. Features
  • High Safe Operating Area (100% Tested) −2 A @ 80 V
  • High DC Current Gain − hFE = 15 (Min) @ IC = 8 Adc
Please Log In to view prices
Transistor - MPSA14, Darlington, 500mA, 30V, NPN
MPSA14 NPN Darlington transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.
  • Max collector to emitter voltage = 30 V
  • Max collector to base voltage = 30 V
  • Max emitter to base voltage = 10 V
  • Max collector current = 0.5 A (continuous)
Please Log In to view prices
Transistor - AS394CH, Matched Pair, Alfa, TO5-8 case, NPN
The AS394CH is a junction isolated ultra well-matched monolithic NPN transistor pair with an order of magnitude improvement in matching over conventional transistor pairs. Electrical characteristics of these devices such as drift versus initial offset voltage, noise, and the exponential relationship of base-emitter voltage to collector current closely approach those of a theoretical transistor. Extrinsic base and emitter resistances are very low, giving very low noise and operating over a wide current range. To guarantee long term stability of matching parameters, internal clamp diodes have been added across the emitter-base junction of each transistor. These prevent degradation due to reverse biased emitter current, the most common cause of field failures in matched devices.
Please Log In to view prices
Transistor - BC557C, General Purpose, TO-92 case, PNP
The BC557 is a silicon general purpose PNP transistor in a TO-92 package. The BC557’s typical applications include signal processing, amplification, and switching.
Please Log In to view prices
Transistor - TIP47, NPN, Power Transistor
The TIP47 power transistor is intended for use in linear and switching applications. This series is designed for line operated audio output amplifiers, switchmode power supply drivers and other switching applications.
Please Log In to view prices
Transistor - 2N321, Germanium, TO-5 case, PNP
2N321 PNP germanium transistors. The 2N321 is a popular PNP for fuzz pedals and other effects. This transistor is in a TO-5 package with long leads commonly found on germanium transistors.
Please Log In to view prices
Transistor - 2N5172, Silicon, TO-92 case, NPN
The 2N5172 is a silicon general purpose NPN transistor in a TO-92 package. The 2N5172’s typical applications include general purpose amplification and switching.
Please Log In to view prices
Transistor - BC337, General Purpose, TO-92 case, NPN
The BC337 is a silicon general purpose NPN transistor in a TO-92 package. The BC337’s typical applications include signal processing, amplification, and switching. The BC337 is available in three different gain ranges: BC337-16, BC337-25, and BC337-40. Type hFE Range (IC=100mA, VCE=1V) Typical hFE (IC=100mA, VCE=1V) BC337-16 100-250 160 BC337-25 160-400 250 BC337-40 250-630 400
Please Log In to view prices
Diode Thyristor - Peavey, SBS 14 Bidirectional, 8V, TO-92 Case
Designed for full-wave triggering in Triac phase control circuits, half-wave SCR triggering application and as voltage level detectors. Used in most Peavey linear power amplifier designs through 2000 including CS/M/DECA series power amps, IPA300, and all models using 402/602/304S/204S power modules.
  • Low Switching Voltage — 8 Volts Typical
  • Uniform Characteristics in Each Direction
  • Low On-State Voltage — 1.7 Volts Maximum
  • Low Off-State Current — 0.1 mA Maximum
Please Log In to view prices
Transistor - AS3046D, Array of 5, Matched Pair, SOIC-14, NPN
The AS3046 is Alfa’s version of the CA3046 IC in an SOIC package. The AS3046D consists of five general purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally connected to form a differentially-connected pair. The transistors are well suited to a wide variety of applications in low power systems. They may be used as discrete transistors in conventional circuits however, in addition, they provide the very significant inherent integrated circuit advantages of close electrical and thermal matching. The AS3046D is available in a 14-pin SOIC package. Features
  • Matched pair of npn transistors
  • VBE matched less than ±1 mV
  • 5 general purpose monolithic transistors
  • Wide operating current range

Applications
  • Filters
  • Custom designed differential amplifiers
  • Temperature compensated amplifiers
Please Log In to view prices
Transistor - 2N2222A, TO-92 case, NPN
2N2222A in a TO-92 package. The 2N2222A is a NPN transistor commonly used in fuzz pedals. Typical Applications:
  • Signal processing
  • Switching
  • Amplification
Please Log In to view prices
Transistor - 2N2369, Silicon, TO-18 case, NPN
The 2N2369 is a silicon NPN transistor in a TO-18 metal case type. The 2N2369 is primarily intended for use in high speed switching and VHF amplification applications.
Please Log In to view prices
Transistor - Peavey, SDS 7204, 300V, 10mA
SDS 7204 transistor, 300 V, 10 mA, Case-30.
Please Log In to view prices
Transistor - 2N708, Silicon, TO-18 case, NPN
The 2N708 is a silicon NPN transistor in a TO-18 metal case type. The 2N708 is primarily intended for use in high speed switching and VHF amplification applications.
Please Log In to view prices
Transistor - AS394H, Matched Pair, Alfa, TO5-8 case, NPN
The AS394H is a junction isolated ultra well-matched monolithic NPN transistor pair with an order of magnitude improvement in matching over conventional transistor pairs. Electrical characteristics of these devices such as drift versus initial offset voltage, noise, and the exponential relationship of base-emitter voltage to collector current closely approach those of a theoretical transistor. Extrinsic base and emitter resistances are very low, giving very low noise and operating over a wide current range. To guarantee long term stability of matching parameters, internal clamp diodes have been added across the emitter-base junction of each transistor. These prevent degradation due to reverse biased emitter current, the most common cause of field failures in matched devices.
Please Log In to view prices
Transistor - J112, JFET, N-Channel,TO-92
J112 N-Channel JFET in a TO-92 package. Designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.
Please Log In to view prices
Transistor - BC558C, General Purpose, TO-92 case, PNP
The BC558 is a silicon general purpose PNP transistor in a TO-92 package. The BC558’s typical applications include signal processing, amplification, and switching.
Please Log In to view prices
Transistor - MJ15016, PNP, Complementary High-Power
Transistor MJ15016, TO-3 Case, PNP
PowerBase complementary transistors designed for high power audio, stepping motor and other linear applications. These devices can also be used in power switching circuits such as relay or solenoid drivers, dc–to–dc converters, inverters, or for inductive loads requiring higher safe operating areas.
Safe Operating Area - Rated to 60V
Please Log In to view prices
Transistor - BC546, General Purpose, TO-92 case, NPN
The BC546 is a silicon general purpose NPN transistor in a TO-92 package. The BC546’s typical applications include signal processing, amplification, and switching. The BC546 is available in two different gain ranges: BC546B and BC546C. Type hFE (IC=2mA, VCE=5V) BC546B 200-450 BC546C 420-800
Please Log In to view prices
Transistor - MPSA64, Darlington, -500mA, -30V, PNP
MPSA63 PNP Darlington transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.
  • Max collector to emitter voltage = -30V
  • Max collector to base voltage = -30 V
  • Max emitter to base voltage = -10 V
  • Max collector current = -0.5 A (continuous)
Please Log In to view prices