Transistors

2SC945 NPN transistors. This is a silicon NPN transistor in a TO-92 package. The 2SC945 was used in many classic Boss pedals such as the CE-2 chorus.

The BC548 is a silicon general purpose NPN transistor in a TO-92 package. The BC548’s typical applications include signal processing, amplification, and switching. The BC548 is available in two different gain ranges: BC548B and BC548C. Type hFE (IC=2mA, VCE=5V) BC548B 200-450 BC548C 420-800

The 2N5172 is a silicon general purpose NPN transistor in a TO-92 package. The 2N5172’s typical applications include general purpose amplification and switching.

The AS3046 is Alfa’s version of the CA3046 IC in an SOIC package. The AS3046D consists of five general purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally connected to form a differentially-connected pair. The transistors are well suited to a wide variety of applications in low power systems. They may be used as discrete transistors in conventional circuits however, in addition, they provide the very significant inherent integrated circuit advantages of close electrical and thermal matching. The AS3046D is available in a 14-pin SOIC package. Features

• Matched pair of npn transistors
• VBE matched less than ±1 mV
• 5 general purpose monolithic transistors
• Wide operating current range

Applications

• Filters
• Custom designed differential amplifiers
• Temperature compensated amplifiers

The TIP47 power transistor is intended for use in linear and switching applications. This series is designed for line operated audio output amplifiers, switchmode power supply drivers and other switching applications.

The AS394H is a junction isolated ultra well-matched monolithic NPN transistor pair with an order of magnitude improvement in matching over conventional transistor pairs. Electrical characteristics of these devices such as drift versus initial offset voltage, noise, and the exponential relationship of base-emitter voltage to collector current closely approach those of a theoretical transistor. Extrinsic base and emitter resistances are very low, giving very low noise and operating over a wide current range. To guarantee long term stability of matching parameters, internal clamp diodes have been added across the emitter-base junction of each transistor. These prevent degradation due to reverse biased emitter current, the most common cause of field failures in matched devices.

BC149C NPN transistor in a rare Mullard Lockfit package. The BC149C is the equivalent of a BC109C but in the Lockfit package rather than a TO-18. The BC149C was used in a variety of audio and radio equipment and works well for fuzz and other effects. It can be found in the Brian May treble boost and the Electrolabs Fuzz.

The 2N4123 is a general purpose silicon NPN transistor in a TO-92 case. The 2N4123 is primarily intended for general purpose amplification. It is a popular choice for silicon fuzz pedals due to its low hFE specifications.

Transistor TIP41C, TO-220 Case. NPN Epitaxial Silicon Transistor Complementary to TIP42 (P-QTIP42C) Max ratings:

• Collector-Base voltage = 100V
• Collector-Emitter Voltage = 100V
• Emitter-Base Voltage = 5V
• Collector current (DC) = 6A
• Collector current (Pulse) = 10A
• Base current = 2A

High voltage medium-power ZTX457 transistor.
Features:

• 300 Volt Collector-Emitter Voltage
• 300 Volt Collector-Base Voltage
• 0.5 Amp continuous current
• 1 Watt Maximum Power Dissipation
  

The BC546 is a silicon general purpose NPN transistor in a TO-92 package. The BC546’s typical applications include signal processing, amplification, and switching. The BC546 is available in two different gain ranges: BC546B and BC546C. Type hFE (IC=2mA, VCE=5V) BC546B 200-450 BC546C 420-800

The 2N3704 is a general purpose silicon NPN transistor in a TO-92 case. The 2N3704 is primarily intended for general purpose amplification and switching applications.

BC148C NPN transistor in a rare Mullard Lockfit package. The BC148C is the equivalent of a BC108C but in the Lockfit package rather than a TO-18. The BC148C was used in a variety of audio and radio equipment and works well for fuzz and other effects.

Transistor MJ15015, TO-3 Case, NPN
PowerBase complementary transistors designed for high power audio, stepping motor and other linear applications. These devices can also be used in power switching circuits such as relay or solenoid drivers, dc–to–dc converters, inverters, or for inductive loads requiring higher safe operating areas.
Safe Operating Area - Rated to 60V

The AS394CH is a junction isolated ultra well-matched monolithic NPN transistor pair with an order of magnitude improvement in matching over conventional transistor pairs. Electrical characteristics of these devices such as drift versus initial offset voltage, noise, and the exponential relationship of base-emitter voltage to collector current closely approach those of a theoretical transistor. Extrinsic base and emitter resistances are very low, giving very low noise and operating over a wide current range. To guarantee long term stability of matching parameters, internal clamp diodes have been added across the emitter-base junction of each transistor. These prevent degradation due to reverse biased emitter current, the most common cause of field failures in matched devices.

The AS194DE is a junction isolated ultra well-matched monolithic NPN transistor pair with an order of magnitude improvement in matching over conventional transistor pairs. Electrical characteristics of these devices such as drift versus initial offset voltage, noise, and the exponential relationship of base-emitter voltage to collector current closely approach those of a theoretical transistor. Extrinsic base and emitter resistances are very low, giving very low noise and operating over a wide current range. To guarantee long term stability of matching parameters, internal clamp diodes have been added across the emitter-base junction of each transistor. These prevent degradation due to reverse biased emitter current, the most common cause of field failures in matched devices.

The BC183 is a general purpose NPN transistor in a TO-92 case. The BC183 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz.

SDS 7204 transistor, 300 V, 10 mA, Case-30.