Transistors

2N5088 NPN Bipolar Junction Transistor in TO-92 package

BC108 NPN silicon transistors. The BC108 is a popular NPN choice for fuzz pedals and other effects such as vintage silicon Fuzz Face builds and Big Muff clones. Type hFE (IC=2mA, VCE=5V) hfe (IC=2mA, VCE=5V, f=1KHz) BC108A 110-220 125-260 BC108B 200-450 240-500 BC108C 420-800 450-900

• NPN polarity
• Collector emitter breakdown voltage 25V
• Collector base breakdown voltage 30V
• Collector current 200mA
• Power 0.75W
• Transition frequency 150MHz
• TO-18 case
• Weight 0.35g

The 2N3566 is a silicon NPN transistor in a TO-105 case. The 2N3566 is primarily intended for general purpose amplifier applications.

The BC183 is a general purpose NPN transistor in a TO-92 case. The BC183 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. The BC183 is available in three different gain ranges: BC183A, BC183B, and BC183C. Type hfe (IC=2mA, VCE=5V, f=1KHz) BC183A 125-260 BC183B 240-500 BC183C 450-900

The BC184 is a general purpose NPN transistor in a TO-92 case. The BC184 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. BC184 was used in various Colorsound pedals - Jumbo Tone Bender, Supa Tone Bender, Power Boost, etc. It was also used in the Schaller Fuzz, and has been used in fuzz pedals from well-known builders such as Skreddy Pedals, D*A*M, and Stu Castledine.

General purpose low-power NPN bipolar junction transistor, used frequently in hobbyist electronic projects.

New old stock 2N3565 transistors manufactured by Micro Electronics. The 2N3565 is a silicon NPN transistor in a TO-106 case. The 2N3565 is primarily intended for general purpose and low level applications. 2N3565 transistors were used in the original Harmonic Percolator, Foxx Tone Machine and the Sam Ash Fuzzz Boxx.

BC109 NPN silicon transistors. The BC109 is a popular NPN choice for fuzz pedals and other effects such as vintage silicon Fuzz Face builds and Big Muff clones. Type hFE (IC=2mA, VCE=5V) hfe (IC=2mA, VCE=5V, f=1KHz) BC109B 200-450 240-500 BC109C 420-800 450-900

The BC183A transistors manufactured by ITT. The BC183A is a general purpose NPN transistor in a TO-92 case. It is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. A version of the BC183A, the BC183KA can be found in some vintage Fuzz Face pedals.

NPN low noise transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = 45 V
• Max collector to base voltage = 45 V
• Max emitter to base voltage = 6.5 V
• Max collector current = 0.2 A (continuous)

General purpose low level, low noise amplifier. Silicon NPN transistor.

The 2N2222A is a NPN transistor in a TO-18 metal case. The 2N2222A is commonly used in fuzz pedals.

2N2222A in a TO-92 package. The 2N2222A is a NPN transistor commonly used in fuzz pedals. Typical Applications:

• Signal processing
• Switching
• Amplification

NPN Darlington transistor (TO-92 package) - designed for applications requiring extremely high current gain at collector currents to 1.0A.

• Max collector to emitter voltage = 30 V
• Max collector to base voltage = 30 V
• Max emitter to base voltage = 10 V
• Max collector current = 1.2 A (continuous)

The BC547 is a silicon general purpose NPN transistor in a TO-92 package. The BC547’s typical applications include signal processing, amplification, and switching. The BC547 is available in two different gain ranges: BC547B and BC547C. Type hFE (IC=2mA, VCE=5V) BC547B 200-450 BC547C 420-800

15 A, 60 V, 115 W
EPIBASE - Designed for power amplifier and switching regulator applications. The best choice where high frequency response, low switching losses and good safe operating area are required.

• Current Gain - Bandwidth Product - fT = 2.5 MHz (Min) @ Ic = 1.0 Adc
• Safe Operating Area - Full Power Rating to 40 V

BC238B NPN transistor in a TO-92 package. The BC238 is used in a variety of vintage pedals such as the Schaller Fuzz, a version of the Brian May treble boost,and later Jen / Tonebender fuzz pedals. The BC238B is a variant of the BC108B and works well in other classic fuzz pedals such as Fuzz Face and Big Muff builds.

The BC182 is a general purpose NPN transistor in a TO-92 case. The BC182 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. The BC182 has a more narrow hFE range than the BC183 which can be helpful for certain builds.

The BC209C is a silicon NPN transistor in a TO-106 case. The BC209C is primarily intended for general purpose audio applications. BC209C transistors were used in original silicon Fuzz Face® pedals as well as a variety of D*A*M pedals.

The BC549 is a silicon general purpose NPN transistor in a TO-92 package. The BC549’s typical applications include signal processing, amplification, and switching. The BC549 is available in two different gain ranges: BC549B and BC549C. Type hFE (IC=2mA, VCE=5V) BC549B 200-450 BC549C 420-800

Low noise transistor for audio frequency amplifier applications. Features:

• Switching and amplifier
• Low Noise
• Compliment to P-QBC560

The 2N1711 is a silicon planar epitaxial NPN transistor in a TO-39 metal case. It is intended for use in high performance amplifiers, oscillators and switching circuits. The 2N1711 is a great choice for amplifiers where low noise is an important factor.

MPSA14 NPN Darlington transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.

• Max collector to emitter voltage = 30 V
• Max collector to base voltage = 30 V
• Max emitter to base voltage = 10 V
• Max collector current = 0.5 A (continuous)

Low noise transistor for audio frequency amplifier applications.