You are here

Transformers & Chokes

 

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(38 pages)
P-T1750HTransformer - Hammond, Output replacement for Fender, 20W 6.6kΩ

Replacement for Deluxe, Deluxe Reverb Equivalent to manufacturer part number #125A1A & #022640 Warning: Not all amplifier models of the same name use the same transformer model.


Please Log In to
view prices
Click to read more
P-T1750JTransformer - Hammond, Output replacement for Fender, 35W 4kΩ

Replacement for Pro-Reverb, Tremolux, Vibrolux Equivalent to manufacturer part number #125A6A and #022848 Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here. Specifications:


























Primary: 4,000 C.T.Ω
Secondary:
Power: 35 W
Amp Type: Push-Pull
Coil Type: Plastic Bobbin


Features:



  • Designed for drop in replacement of original units
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used and design specs were kept as close as possible to the original part to preserve the stock "tone".

Please Log In to
view prices
Click to read more
P-T125ASETransformer - Hammond, Universal Single Ended, 3 W, 25 mA
  • Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits.
  • Frequency response: 100 Hz. - 15 Khz (± 1db max. - ref. 1 Khz). (For full frequency response (20 Hz. to 20 Khz.) - see P-T1627SE).
  • For push-pull output use, see P-T125A - optimized for push-pull tube output circuits.
  • Open style with minimum 12" long primary & secondary leads leads.
  • All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C.

Please Log In to
view prices
Click to read more
P-T1750WTransformer - Hammond, Output replacement for Fender, 100W 2kΩ

Replacement for Dual Showman, Twin Reverb Equivalent to manufacturer part number #125A29A and #022889 Warning: Not all amplifier models of the same name use the same transformer model.


Please Log In to
view prices
Click to read more
P-T278XTransformer - Hammond, Power, 400-0-400 V, 230 mA

Specifications:



  • Size: 229 VA
  • Dual Primary: 115 VAC, 125 VAC, 60 Hz.
  • A.C. High Voltage Secondary RMS: 800V.C.T. @ 230mA
  • Filament Winding #1: 5 V C.T. @ 3 A
  • Filament Winding #2: 6.3 V C.T.

Please Log In to
view prices
Click to read more
P-TM950OTransformer - Marshall, Output, 50 W, for JCM 900

Genuine Marshall™ output transformer for JCM900 and JCM2000.


Please Log In to
view prices
Click to read more
P-C194GChoke - Hammond, Replacement for Marshall Plexi

Replacement for Marshall Plexi Specifications:



  • Inductance ± 15%: 3 H
  • D.C. Current: 250 mA


Features:



  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Please Log In to
view prices
Click to read more
P-T166N6Transformer - Hammond, Filament, 6.3 VCT, 4 A, Open Style

Specifications



  • Primary: 115 VAC, 60 Hz
  • Secondary: 6.3 VCT, 4 A
  • Mounting Centers: 2.81", u-bracket


Key Features



  • Center tapped secondary
  • Open style, channel bracket, two hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)

Please Log In to
view prices
Click to read more
P-T125ESETransformer - Hammond, Universal Single Ended, 15 W, 80 mA
  • Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits.
  • Frequency response: 100 Hz. - 15 Khz (± 1db max. - ref. 1 Khz). (For full frequency response (20 Hz. to 20 Khz.) - see P-T1627SE).
  • For push-pull output use, see P-T125A - optimized for push-pull tube output circuits.
  • Open style with minimum 12" long primary & secondary leads leads.
  • All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C.

Please Log In to
view prices
Click to read more
P-T370BXTransformer - Hammond, Power, 275-0-275 V, 58 mA
  • Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz.
  • High voltage secondary designed for full wave center tapped use.
  • 50 VAC bias tap from high voltage secondary C.T.
  • Black epoxy painted to match our P-T1650 series of output transformers .
  • Class A insulation (105 degrees C).
  • Hi-Pot test of 2,000 V RMS.
  • Windings are concentric wound for low stray field and low noise.


Secondary: 275-0-275 V, 58 mA Filament winding 1: 5 VCT, 2 A Filament winding 2: 6.3 VCT, 2 A Mounting centers: 2" x 1.94" vertical mount Weight: 2.96 lbs.


Please Log In to
view prices
Click to read more

Pages

(38 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Transformers & Chokes