Transformers & Chokes

Original Fender® reverb driver for Pro Reverb. Replacement for #037099. Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here.
See P-TGR-001 for a generic Fender® style reverb driver.

• Open style, chassis mount transformers with a 115V 60Hz primary and a 50V center tapped secondary.

• Primary 115 VAC, 60 Hz.
• Secondary 30 C.T.
• Center tapped secondary.
• Open style, channel bracket, two hole chassis mount.
• Minimum 6" long leads.
• Dual bobbin design - no electrostatic shield required.
• Class B insulation (130 degrees, C).
• Hi-Pot test of 2,000 V RMS.
• UL listed (# E50394) & CSA certified (# LR3902).

Open style, chassis mount transformers with a 115V 60Hz primary and a 44V center tapped secondary.

Features:

• Designed for drop in replacement of original units.
• Physically, parts were designed to look similar to original factory units (where possible).
• Inductances measured at rated D.C. current.
• Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
• Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Open style, chassis mount transformers with a 115V 60Hz primary and a 9V center tapped secondary.

Open style, chassis mount transformers with a 115V 60Hz primary and a 7V or 7.5V secondary.

Open style, chassis mount transformers with a 115V 60Hz primary and an 8V or 8.5V secondary.

16H @ 40 mA guitar amplifier replacement for Vox TB35C2 Tony Bruno. Physically, parts were designed to look similar to original factory units (where possible). Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

• Open style, chassis mount transformers with a 115V 60Hz primary and a 60V center tapped secondary.

Specifications:

• Size: 7 VA
• Dual Primary: 117 VAC, 234VAC, 50/60 Hz.
• Secondary VAC RMS Series: 14V @ 0.5 A
• Secondary VAC RMS Parallel: 7V @ 1 A

Features:

• Primary 117/234 VAC, 50/60 Hz.
• Dual secondaries
• Secondaries can be used as; a center tapped secondary, parallel connected or used individually
• Units are designed for use with all windings engaged.
• Open style.
• Minimum 6" long leads.
• Dual bobbin design - no electrostatic shield required.
• Class B insulation (130 degrees, C) for extra p

Open style, chassis mount transformers with a 115V 60Hz primary and a 120V center tapped secondary.

Open style, chassis mount transformers with a 115V 60Hz primary and a 33V center tapped secondary.

• Replacements for Fender Amps
• Designed for drop in replacement of original units.
• Physically, parts were designed to look similar to original factory units (where possible).
• Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

Size: 48 VA
Secondary Series: 40V C.T. @ 1.2A
Secondary Parallel: 20V @ 2.4 A
Features:

• Low profile mounting, dual - split bobbin design.
• Low primary to secondary coupling, balanced windings, no electrostatic shield required and low EMF radiation due to semi-toroidal design.
• Universal dual primary 115/230V - 50/60 Hz.
• High insulation - Hipot of 1,750V RMS.
• Class B insulation - 130 degrees C.
• C UL US recognized.

Features:

• Small, economical, open, two hole horizontal bracket mount.
• Insulated, color coded flexible leads, 4" long minimum
• Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
• When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.

Part No. Applicaton Nominal Impedance (Ohms) Primary D.C. D.C.

Features:

• Perfect for audio input, line matching, isolation or output transformer applications.
• 2 watt (± 1.5 dB, 300 Hz. - 50 kHz.).
• Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187" length).
• Power level ratings are maximum at lowest frequency rating
• Power can be increased slightly at higher frequencies.
• Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.

• Primary 115 VAC, 60 Hz.
• Designed for small power or bias supplies, test equipment, preamps etc.
• Models P-T261C6, P-T261E6, and P-T261G6 can also be used with full wave C.T. rectifiers.
• Economical , two hole, channel bracket, chassis mount.
• Minimum 5" long leads.
• Convenient 6.3 filament/auxiliary winding.

Open style, chassis mount transformers with a 115V 60Hz primary and an 80V center tapped secondary.

Developed in response to requests from the Collins Collectors Association"this is a matching audio transformer for older equipment with 600 ohm audio outputdriving modern speakers. Or for "classic" high impedance speakers used with newer equipmentsimply swap primary for secondary (ie...4 or 8 ohm input and 600 ohms out). Key Features Isolation unit: (i.e.

Specifications:

• Size: 48 VA
• Dual Primary: 117 VAC, 234VAC, 50/60 Hz.
• Secondary VAC RMS Series: 48V @ 1 A
• Secondary VAC RMS Parallel: 24V @ 2 A

Features:

• Primary 117/234 VAC, 50/60 Hz.
• Dual secondaries
• Secondaries can be used as; a center tapped secondary, parallel connected or used individually
• Units are designed for use with all windings engaged.
• Open style.
• Minimum 6" long leads.
• Dual bobbin design - no electrostatic shield required.
• Class B insulation (130 degrees, C) for extra p

Specifications:

• Size: 14 VA
• Dual Primary: 117 VAC, 234VAC, 50/60 Hz.
• Secondary VAC RMS Series: 14V @ 1 A
• Secondary VAC RMS Parallel: 7V @ 2 A

Features:

• Primary 117/234 VAC, 50/60 Hz.
• Dual secondaries
• Secondaries can be used as; a center tapped secondary, parallel connected or used individually
• Units are designed for use with all windings engaged.
• Open style.
• Minimum 6" long leads.
• Dual bobbin design - no electrostatic shield required.
• Class B insulation (130 degrees, C) for extra pr

Specifications:

• Size: 15 VA
• Dual Primary: 117 VAC, 234VAC, 50/60 Hz.
• Secondary VAC RMS Series: 5V @ 3 A
• Secondary VAC RMS Parallel: 2.5V @ 6 A

Features:

• Primary 117/234 VAC, 50/60 Hz.
• Dual secondaries
• Secondaries can be used as; a center tapped secondary, parallel connected or used individually
• Units are designed for use with all windings engaged.
• Open style.
• Minimum 6" long leads.
• Dual bobbin design - no electrostatic shield required.
• Class B insulation (130 degrees, C) for extra p

Open style, chassis mount transformers with a 115V 60Hz primary and a 22V center tapped secondary.