Tools

Brush - Flat Chip, 2”, 1500
2 inch flat chip brush great for applying tolex glue or any other purposes. This brush features a 4.75 inch wood handle.
Please Log In to view prices
Soundhole Kit - Router Base and Jig
This kit consists of the precision router base for Dremel tools along with the routing jig for soundhole & rosette. Kit includes:
  • S-T235
  • S-T256

The precision router base is a stable and versatile way to support your Dremel tool. This base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.
  • Excellent control
  • Easy installation
  • Accurate freehand routing

Operation information for the precision router base: To install - simply unscrew the threaded collar on the nose of the Dremel and screw the Dremel directly into the Precision Router Base. Each turn of the large knurled thumbwheels adjusts your Dremel's cutting depth by .035"" (.889mm).
Please Log In to view prices
StripBoard - Single Sided, 3.94” x 3.15”, Mounting Holes
ST2 StripBoard is a prototyping circuit board with a standard long strip pattern. Tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads. It has 0.1" hole spacing for DIP integrated circuits and headers and other parts. ST2 has higher quality than traditional stripboard. The holes are drilled, not punched. The base material is high-quality FR4 glass epoxy board. It has better stability and moisture resistance than boards using phenolic or SRBP (synthetic resin bonded paper), which can warp with exposure to humidity. Features
  • Standard stripboard pattern, with tracks running the length of the board.
  • Single-sided high-quality FR4 glass-epoxy circuit board.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
Please Log In to view prices
StripBoard - Single Sided, 6.30” x 3.94”
ST3U StripBoard is a prototyping circuit board with a standard long strip pattern. Tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads. It has 0.1" hole spacing for DIP integrated circuits and headers and other parts. It has higher quality than traditional stripboard. The holes are drilled, not punched. The base material is high-quality FR4 glass epoxy board. It has better stability and moisture resistance than boards using phenolic or SRBP (synthetic resin bonded paper), which can warp with exposure to humidity. Features
  • Standard stripboard pattern, with tracks running the length of the board.
  • Single-sided high-quality FR4 glass-epoxy circuit board.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
Please Log In to view prices
Breadboard - Solderable PCB, 3.00” x 1.90”
The SB400 Solderable PCB BreadBoard enables you to transfer your circuit and wires from a plug-in breadboard without recutting wires or changing your layout. The SB400 has the same pattern and spacing as a standard 400 connection point BB400 solderless plug-in breadboard. It has a standard 5-hole strip for each IC pin, just like solderless breadboards plus 4 power rails. However, it has the advantage that soldered joints provide a more reliable long-term connection than solderless contacts. The SB400 has four power rails like solderless breadboards, plus two bonus rails for power or signals. There are bonus two-hole pads along the centerline allowing DIL (dual in-line) headers to be used. BPS prototyping boards use high-quality FR4 glass epoxy PCBs for long life, with an anti-tarnish protective coating for easy soldering.
Please Log In to view prices
PadBoard - Double Sided, Plated Holes, 3.94” x 3.15”, Mounting Holes
The PadBoard-2 prototyping circuit board has a general purpose pad-per-hole pattern which is good for analog and digital use. It is a double-sided board with plated holes, which allows components to be soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board. Features
  • Pad-per-hole prototyping board with plated-thru holes. A square pad every 5th hole makes it easy to align components on top and bottom.
  • Double-sided high-quality FR4 glass-epoxy circuit board with plated holes. Components can be soldered to either side.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering. Lead free and RoHS compatible.
  • 31 x 39 holes, 0.037" holes are drilled on 0.1" (2.54mm) centers. Four 0.125” mounting holes.
  • Size2 = 100 x 80mm (3.94 x 3.15in), 1/16" thick (1.6mm)
Please Log In to view prices
PadBoard - Double Sided, Plated Holes, 6.30” x 3.94”, Mounting Holes
The PadBoard-3U prototyping circuit board has a general purpose pad-per-hole pattern which is good for general purpose analog and digital use. It is a double-sided board with plated holes, which allows components to be soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board. The PCB accepts a 96 pin DIN-41612 VME connector for backplane or board-to-board applications. Holes for ejector latches are provided. Features
  • Pad-per-hole prototyping board with plated-thru holes. A square pad every 5th hole makes it easy to align components on top and bottom.
  • Double-sided high-quality FR4 glass-epoxy circuit board with plated holes. Components can be soldered to either side.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
Please Log In to view prices
Soldering Iron - Weller, Marksman, 40 watts
  • Weller Consumer Soldering Irons with 3 LEDs
  • Three LED lights for limited application shadowing
  • Round Co-molded soft grip handle design for easy tip positioning
  • Triangular handle area for maximum tip control
  • Stainless steel heater construction
  • Excellent quality consumer iron
  • Input Voltage: 120
  • Power Consumption: 40 watts
  • Tip Temperature: 900ºF
  • Heating Element Type: Nichrome Wound
  • Fiberglass and ceramic insulated
Please Log In to view prices
Guitar Nut Cube - for adjusting guitar nuts
Unique tool for the easy removal and adjustment of potentiometers and switches from guitars
Please Log In to view prices
Wire Stripper / Cutter - Xcelite, 6", with Spring and Lock
6" stripper, cutter with spring and lock, cushion grip handles, carded. Features
  • Wire cutting and stripping edges conveniently located in front of pivot
  • Allows use in tight places
  • Needle nose pliers add wire pulling and bending capabilities
  • Scissors-action stripper for cleaner, faster and more accurate stripping
  • Serrated edge
  • Includes work-speeding automatic spring and lock
  • Red cushion grip handle provides maximum leverage
  • For copper and aluminum wire 10 - 22 AWG
Please Log In to view prices
Fret Files - for Filing Fret Crowns
Solid steel crowning files with dual cutting edges for precision fret crowning. These should be in any luthier’s tool kit!
  • Made of solid steel
  • Soft rubber coating on the handle
  • Double sided (both sides are the same size)
  • 4-3/16” cutting surface
  • Available in three sizes to cover most fret sizes (small,medium,large)
Please Log In to view prices
Fret Press - Handheld, 4 cauls, for seating frets
Handheld fret press is a professional fretting tool that gives you finer control over the pressure needed to seat a fret into the slot - you can actually feel it seating! It eliminates complicated clamping setups, so your press-in fret jobs go faster. There's a self-leveling upper caul that adjusts easily to any neck. Used with radius inserts (S-T261) to press frets into guitar fret boards. This method is preferred by many as an alternative to hammering the frets in. Includes 4 interchangeable support cauls.
Please Log In to view prices
Soldering Iron Tip - Weller, solid core, single flat / sloped type, ST Series
Genuine Weller single flat style tips for use with all ST Series compatible soldering irons. The single flat style is versatile tip style that works great in situation where precision is required as well as situations where heat needs to be spread efficiently. These tips are an excellent choice for use with the S-TWLC100 soldering station.
For use with Weller Irons: SP40N, WP25, WP30, and WP35; and WLC100 station
Please Log In to view prices
Fingerboard Guards - 2 Sizes, for protecting frets
Package of 2
Designed to protect the fingerboard when doing work on your frets. These shields are indispensable when doing any sort of fret work. Being only .010” thick they can bend to accommodate and fingerboard radius. Made of 304 spring stainless steel.
Comes with 2 sizes: 3-1/8" x 7/8" x .010" - 1/4 inch protection on either side of the fret, 3-1/8"" x 0.59" x .010"" - 3/8 inch protection on either side of the fret
Please Log In to view prices
StripBoard - Single Sided, 3.15” x 1.97”, Mounting Holes
Prototyping circuit board with a standard long strip pattern where tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads and the board has 0.1" hole spacing for DIP integrated circuits/ headers as well as other parts. Higher quality than traditional stripboard, the holes are drilled, not punched.
Please Log In to view prices
Soldering iron tip - Weller, hollow core, 0.8mm, conical, ET Series
Genuine Weller conical style (round) tips for use with all ET Series compatible soldering irons. The concal style is great for general use and precision soldering on small contacts. These tips are an excellent choice for use with the S-TWE1010 soldering station.
  • Sensor hole in the base of tip is fitted with a stainless steel liner
  • Prevents the tip from seizing to the sensor
Please Log In to view prices
Precision Router Base - Support for Dremel Tool
A stable and versatile way to support your Dremel tool. This precision router base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.
Please Log In to view prices
Solder station - Weller, WLC100, 40 watts
40 Watts Soldering Station for Hobbyist and DIYer
  • Input Voltage: 120
  • Output Voltage: 120
  • Power Consumption: 5 - 40 watts
  • Temperature Range: 900ºF max
  • On/Off switch with "power-on" indicator light
  • Variable control produces 5 to 40 watts
  • Natural sponge tip cleaning pad
  • Ideal for hobbyist, DIYers and students
  • Includes 1/8" screwdriver tip
  • UL listed
Please Log In to view prices
Power String Winder - Duck's Deluxe, color may vary
Fits any adjustable drill or adjustable screwdriver. One size for: guitars, bass, banjos, mandolins, steel guitars, dobros, jazz boxes, etc.
  • Precision molded solid body
  • No more manual winding ... string your instrument in minutes!
  • Direct drive to the tuning keys
  • Plastic, will not scratch tuner buttons.
  • The ultimate restringing tool for effortless string replacement

Color pictured is an example. Actual color may vary
Please Log In to view prices
Cutters - Xcelite, Shearcutter, General Purpose
5" Overall Length, 3/4" Jaw Length. Great for cutting wire and component leads, etc. Product Features:
  • Low profile, general-purpose cutter
  • Superior blade by-pass shear cutting action
  • Better cuts with half the effort
  • Greatly reduced mechanical shock delivered to the work
  • Features red grips
  • Flush cuts soft wire up to 20 AWG (0.8mm)
Please Log In to view prices
Fret File - for leveling across multiple frets
For filing straight across multiple frets to ensure that they are level.
Please Log In to view prices
Soldering Iron Tip - Weller, hollow core, screwdriver type, ET Series
Genuine Weller screw driver (chisel) style tips for use with all ET Series compatible soldering irons. The screwdriver style is great for soldering through hole components. The flatted tip makes it easy to make contact with both the solder pad and component lead. These tips are an excellent choice for use with the S-TWE1010 soldering station.
  • Sensor hole in the base of tip is fitted with a stainless steel liner
  • Prevents the tip from seizing to the sensor
Please Log In to view prices
Guitar Pick Punch - For Making DIY Picks
This guitar pick punch is great for making your own guitar picks out of a wide variety of material. Two pick sheets are included but it is also great for making novelty picks out of old gift cards, IDs, credit cards, hotel key cards, and anything else you can think of.
This pick punch makes a great gift for any guitar player.
Please Log In to view prices
Understring Radius Gauges - 9 Sizes, for Saddle Adjustments
Package of 9
Our low profile aluminum understring radius gauges have a precision radiused top and bottom for accurate measurement. The slim shape allows you to take measurements of several radii without removing the strings on your guitar.
  • Obtain accurate measurements of your instrument's fretboard radius using the bottom radius of the gauge. The bottom radius can also be used to set pickup polepiece height to the string radius.
  • Use the top radius of this gauge to determine the proper height adjustment for the bridge saddles.
  • The following gauges are included in this set: 7.25" 9.5" 10" 12" 14" 15" 16" 17" 20"
Please Log In to view prices