Tools

Neck Cradle - Dunlop, Maintenance Station
The self-aligning cradle rotates to provide full support to the back or front of the neck for increased stability during repairs or maintenance work.
Please Log In to view prices
Fret File - for leveling across multiple frets
For filing straight across multiple frets to ensure that they are level.
Please Log In to view prices
Caliper - Digital, highly-accurate for luthiers
This Luthier's Digital Caliper has a custom jaw notch for accurately measuring fretwire crown height (the height above the fretboard). This is essential for comparing new wire to original wire. And there's a notch on the depth gauge to measure fret height on the instrument.
  • Measures fret height before AND after fret installation
  • Accurate readouts in inches or millimeters
  • A must for all precision guitar work
Please Log In to view prices
File - Diamond, for Frets, Straight
Double sided diamond fret file. Easily the best choice for fret crowning, diamond files cut in two directions (push and pull) rather than one with no chatter giving you a smoother fret after the crowning process File cutting surface is impregnated with diamonds to give you a smooth cut with long lasting durability.
  • Made of solid steel with diamond cutting surface.
  • Soft rubber coating on the handle
  • 5-3/4” cutting surface
  • Double sided to cover different fret sizes
Please Log In to view prices
Fret File - Diamond, offset, for dressing and shaping frets
Diamond fret file with offset shape for more comfortable fret dressing and improved clearance over the guitar body at high frets. Both full length concave filing grooves (for medium and wide fretwire) uniformly coated with micro industrial diamond particle.
Please Log In to view prices
Routing Jig - for Soundhole & Rosette
Soundhole and Rosette routing jig. Adjustable from 2” diameter to 6” diameter. Includes two hex adjustable M4x0.70 countersunk screws for attaching a router base, one registration pin (4 mm diameter) and three hex keys: 2.5 mm, 2.0 mm, 1.5 mm. Use with precision router base support for Dremel tool (S-T235).
Please Log In to view prices
Profiling Gauge - 150mm length, for duplicating shapes
150mm length. Used to record the shape of a surface, which can then be used to trace a copy onto another surface. Needles are held firmly, which makes them easy to shape, but they remain in place when using to trace.
Please Log In to view prices
File Set - for Nut And Saddle Shaping
Set of files for control over shaping nuts and saddles.
  • Half-round shape
  • Flat shape
  • Triangle shape
package of 3
Please Log In to view prices
Wood Carving File - Half-Round, anti-clog
High quality wood carving files with a special toothpattern designed to avoid clogs and self-clean as you file. These files are available in three different lengths to meet the needs of any project and feature a half round shape.
Please Log In to view prices
Precision Router Base - Support for Dremel Tool
A stable and versatile way to support your Dremel tool. This precision router base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.
Please Log In to view prices
Wood Saw Rasp - High Carbon Steel, coarse side & fine side
Wood rasp - one coarse side for heavy work and one fine side for detailed work
Please Log In to view prices
File - Fret Levelling, Hard Chrome Coated, for Stainless Steel Frets
Hard chrome coated fret file for leveling stainless steel frets. This two sided file features the same cutting pattern on each side.
  • Hard chrome coated
  • Two sided
  • 6.25” x 1” x 0.225”
Please Log In to view prices
Chisel - Flat, Japanese, Micro, 1.1mm
Small flat chisel with an offset handle allowing this tool to easily get into tight spaces for luthier work. The 1.1mm blade is made of high quality HSS steel and is perfect when precision is required for nut slots and elsewhere. Made in Japan.
Please Log In to view prices
Fret File - Fret Dressing File, Hard Chrome Coated, for Stainless Steel Fretwire
Made in Japan. Files specially designed for fret dressing and fret end work. Used for rounding fret ends and deburring. The hard chrome coating used on these files allows for use on both standard fret materials as well as stainless steel frets.
  • Size Medium = 2mm radius for medium frets.
  • Size Jumbo = 3mm radius for jumbo frets.
Please Log In to view prices
Gouge - Spoon Shape, Japanese, Steel, Shiragami
High quality made in Japan spoon-shaped gouges for luthier work. These gouges have a hardness of HRC64 and a total length of 180mm. The hardwood handle features a flat end for hammering and a decorative handle. The blade material is Shiragami white steel.
Please Log In to view prices
Soundhole Kit - Router Base and Jig
This kit consists of the precision router base for Dremel tools along with the routing jig for soundhole & rosette. Kit includes:
  • S-T235
  • S-T256

The precision router base is a stable and versatile way to support your Dremel tool. This base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.
  • Excellent control
  • Easy installation
  • Accurate freehand routing

Operation information for the precision router base: To install - simply unscrew the threaded collar on the nose of the Dremel and screw the Dremel directly into the Precision Router Base. Each turn of the large knurled thumbwheels adjusts your Dremel's cutting depth by .035"" (.889mm).
Please Log In to view prices
Chemical Polishing File - Flat, clean tooth pattern
CP files have special file tooth pattern and it keeps file clean without clogging. Easy to control and fast to file clean with light strokes.
Please Log In to view prices
Fret File - 600 grit, 3 radiuses, diamond, for Crowns
600 grit diamond-plated file. 3 different, (small, medium, large) radiuses in one file. 130mm file length, 230mm total.
Please Log In to view prices
Radius Gauge - stainless steel, 6 radius measurements
This stainless steel radius gauge can measure six different radiuses as well as fret crown heights and string action height. Overall size 210mm x 25mm
Includes
  • 7.25"
  • 9.5"
  • 10"
  • 12"
  • 14"
  • 16"
Please Log In to view prices
Sanding - Diamond Sheet, 75x150mm, Self-Adhesive
75 x 150mm diamond self-adhesive sheets, for S-T229-X sanding blocks.
Please Log In to view prices
Fret Saw Guide - for Ensuring Straight Cuts
Three neodymium magnets on each end to ensure a straight cut at a right angle. The saw guide can adjust 0mm to 4.7mm slot depth by sliding the frame. The slide frame side has scale marks representing 1mm of depth. For use with S-T254.
Please Log In to view prices