Tools

Soldering iron tip - Weller, conical, for WTCPT
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWTCP
  • PT Series Conical Tip for TC201 Series Iron
  • PTP7 - 0.79mm / 0.031" diameter conical tip
  • Solid copper, plated with iron all over
  • Designed to provide maximum heat transfer from the heater to the tip
  • Tinned with lead-free solder
  • Use only genuine Weller tips
Please Log In to view prices
Guitar Pick Punch - For Making DIY Picks
This guitar pick punch is great for making your own guitar picks out of a wide variety of material. Two pick sheets are included but it is also great for making novelty picks out of old gift cards, IDs, credit cards, hotel key cards, and anything else you can think of.
This pick punch makes a great gift for any guitar player.
Please Log In to view prices
Staking Tool - For Small Eyelets
Staking tool for small eyelets such as S-HEYE-B. Directions:
  • Drill hole using #42 drill bit
  • Insert eyelet
  • Flip board over onto a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
Please Log In to view prices
Fret File - for leveling across multiple frets
For filing straight across multiple frets to ensure that they are level.
Please Log In to view prices
Caliper - Digital, highly-accurate for luthiers
This Luthier's Digital Caliper has a custom jaw notch for accurately measuring fretwire crown height (the height above the fretboard). This is essential for comparing new wire to original wire. And there's a notch on the depth gauge to measure fret height on the instrument.
  • Measures fret height before AND after fret installation
  • Accurate readouts in inches or millimeters
  • A must for all precision guitar work
Please Log In to view prices
Wrench - Dunlop, System 65, Uni-wrench
The Dunlop System 65 Uni-Wrench is great tool for tightening and loosening any threaded nut on a guitar or bass. This includes pots, jacks, bridge posts, rounded knurled nuts on selector switches and more.
Please Log In to view prices
Pliers - Xcelite, serrated jaw, 5.5", Long Reach
5 1/2" Overall Length, 1 1/2" Jaw Length Product Features:
  • Thin profile, long reach pliers
  • For access into tight spaces
  • Lightweight for maximum comfort
  • For use in precision electronic assembly applications
  • Features serrated jaws
  • Features red grips
Please Log In to view prices
Desoldering Pump - Weller, manual, for removing solder
Removes melted solder by suction. Facilitates accurate printed circuit repair and cleaning. This lightweight desoldering pump has an anodized aluminium body to assure durability and features a plunger safety shield, short-stroke plunger and a no-clog automatic tip cleaner. Replace tip with S-T7875B. Made in Taiwan.
Please Log In to view prices
Soldering iron tip - Weller, hollow core, 1.6mm, narrow screwdriver, ET Series
Genuine Weller narrow screw driver (chisel) style tips for use with all ET Series compatible soldering irons. The narrow screwdriver style is great for soldering in hard to reach and narrow spots. These tips are an excellent choice for use with the S-TWE1010 soldering station.
  • Sensor hole in the base of tip is fitted with a stainless steel liner
  • Prevents the tip from seizing to the sensor
Please Log In to view prices
Case Tools - Multi-Tool for USA Fender Guitars, Groovetech, 4-in-1
An exclusive design from GrooveTech founder Dan Parks, this CaseTools Guitar Multi-Tool allows you to make quick tweaks to your Fender USA Guitar, and it’s small enough to fit right in the palm of your hand. It features four different sides: 1/8” ball-end hex wrench for truss rod adjustments, 1/16” and .05” hex wrenches for bridge adjustments, and a custom Phillips screwdriver bit shaped to handle both #1 and #2 screws like those in your neck and pickguard.
Please Log In to view prices
Soldering iron station - Weller, WE 1010, 70W, digital display
The Weller WE1010 is an excellent soldering station for professional use and beginner hobbyists alike. With increased power and stability, the WE1010 is an upgrade in many ways for users of the WES51 and WTCPT soldering stations.
Please Log In to view prices
PadBoard - Double Sided, Plated Holes, 3.94” x 3.15”, Mounting Holes
The PadBoard-2 prototyping circuit board has a general purpose pad-per-hole pattern which is good for analog and digital use. It is a double-sided board with plated holes, which allows components to be soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board. Features
  • Pad-per-hole prototyping board with plated-thru holes. A square pad every 5th hole makes it easy to align components on top and bottom.
  • Double-sided high-quality FR4 glass-epoxy circuit board with plated holes. Components can be soldered to either side.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering. Lead free and RoHS compatible.
  • 31 x 39 holes, 0.037" holes are drilled on 0.1" (2.54mm) centers. Four 0.125” mounting holes.
  • Size2 = 100 x 80mm (3.94 x 3.15in), 1/16" thick (1.6mm)
Please Log In to view prices
Glue Sticks - 7x100mm pack
Colors Available:
Pack of 16 glues sticks for use with 7mm hot glue guns. These glue sticks use an EVA tackifier for a fast bonding, high strength, age resistant adhesion.
Please Log In to view prices
Bench-top Smoke Absorber - Atten, ST-1016, For Soldering
Atten ST-1016 benchtop fume extractor with LED light. This smoke absorber can be operated vertically or horizontally for more focused extraction based on positioning. The filter is made of highly activated carbon for better absorption. The fan provides a steady pull ensuring that all fumes pass through the filter when used properly. The optional light can provide additional lighting on the soldering surface. Carbon filter included. Specifications:
  • Air volume (vertical): 1.03 m³/min
  • Air volume (horizontal): 0.4 m³/min0.4
  • Air flow (vertical): 1.0 m/s
  • Air flow (horizontal): 2.6 m/s
Please Log In to view prices
File - Diamond, for Frets, Straight
Double sided diamond fret file. Easily the best choice for fret crowning, diamond files cut in two directions (push and pull) rather than one with no chatter giving you a smoother fret after the crowning process File cutting surface is impregnated with diamonds to give you a smooth cut with long lasting durability.
  • Made of solid steel with diamond cutting surface.
  • Soft rubber coating on the handle
  • 5-3/4” cutting surface
  • Double sided to cover different fret sizes
Please Log In to view prices
Fret Collars - Dunlop, System 65, for fret polish without taping
The Dunlop System 65 Fret Collars include everything you need for a quick fret polish without the need for taping the entire neck. Two sizes of flexible steel collars are included, 0.125 and .080.
package of 2
Please Log In to view prices
Tape - Copper Foil, for Shielding, 98ft Length Roll
Conductive copper foil tape for shielding guitar cavities, amplifier cabinets, or elsewhere. This tape features a strong adhesive backing and soldering directly to the surface is easy and results in a strong bond. Sold in 98ft rolls.
Please Log In to view prices
Cutters - Xcelite, Relieved Tapered Head
  • Relieved tapered head-flush cutter
  • Allows use between closely spaced components
  • Features blue cushion grips
Please Log In to view prices
Tool - Cable Tie Gun
Easy to use cable tie gun cuts ties up to 50 lb. tensile. Use this tool to pull ties tightly and then cut the excess length.
Please Log In to view prices
Tool Oil - for Maintenance & Work
Multi-use tool oil for both maintaining and using tools. This rust-preventive oil can be used to lubricate tools such as hinges on pliers. It can also be used to thinly coat metal tools to avoid future corrosion. Additionally, it can be used as a cutting and filing lubricant when slotting a nut for a guitar, slotting bridge saddles, and other cutting purposes. The 15ml bottle features a needle dropper tip.
Please Log In to view prices
Soldering Iron - Atten, ST-2065D, 65W, Adjustable Temp., Digital Display
High quality digitally controlled soldering iron from Atten. The ST-2065D is a highly portable 65W soldering iron with a ton of features packed into its small package. This iron features accurate and adjustable temperature control along with a simple preset system and is compatible with a wide variety of tip options. The feature-rich ST-2065D easily surpasses other irons in its class.
Please Log In to view prices
Vise - PCB Holder, Benchtop, Adjustable Width
Benchtop PCB holder with an adjustable width that can fit PCBs up to 200x140mm. This holder has a sturdy base and the 360° rotation allows easy access to both sides of the board when working. The arms are slotted for different thicknesses allowing for secure clamping of 1.2mm, 1.8mm, 2mm, and 3mm PCBs.
Please Log In to view prices
Fret File - Diamond, offset, for dressing and shaping frets
Diamond fret file with offset shape for more comfortable fret dressing and improved clearance over the guitar body at high frets. Both full length concave filing grooves (for medium and wide fretwire) uniformly coated with micro industrial diamond particle.
Please Log In to view prices
Routing Jig - for Soundhole & Rosette
Soundhole and Rosette routing jig. Adjustable from 2” diameter to 6” diameter. Includes two hex adjustable M4x0.70 countersunk screws for attaching a router base, one registration pin (4 mm diameter) and three hex keys: 2.5 mm, 2.0 mm, 1.5 mm. Use with precision router base support for Dremel tool (S-T235).
Please Log In to view prices