Tools

Staking tool for small eyelets such as S-HEYE-B. Directions:

• Drill hole using #42 drill bit
• Insert eyelet
• Flip board over onto a hard service
• Center staking tool over the eyelet
• Strike staking tool with hammer to clamp eyelet to board

The GrooveTech Guitar/Bass Multi-Tool has everything you need to give your guitar or bass a full setup—and it’ll all fit in your pocket or your gig bag. For truss rod adjustments, this multi-tool is equipped with three ball-end hex wrenches for standard nuts and a a 5/16” nut driver for Gibson-style nuts. Additional hex wrenches cover bridge and tremolo adjustments, and if you need to work on an instrument with vintage-style saddle screws, the 2.5mm slotted screwdriver is ready to go. Need to remove your pick guard or neck plate or put on a new set of Straplok® Strap Buttons? The two Phillips screwdrivers will take care of these and other needs. Finally, the ruler will help you check neck relief and string action.
All wrenches are pro-grade, using heat-treated S2 steel with a polished chrome finish.

The DK Multi Multi-Tool is a drum key made from pro-grade materials for exceptional durability with three metric-hex-wrench ends to cover pedal and other adjustments. The DK Drum Multi Multi-Tool is the sturdiest, handiest drum key you’ll ever buy. Made from pro-grade chrome vanadium steel, the centerpiece is a forged skeleton made to precision tolerances, ensuring exceptional durability and a proper fit. It comes wrapped in a polypropylene jacket for a comfortable feel. But that’s not all. We added three metric hex wrenches to cover the most common sizes found on drum hardware—especially pedals. Even with all of these features, the DK Multi Multi-Tool is about the same size as a standard drum key. This is likely to become your favorite. GrooveTech Tools offer a lifetime of quality instrument care for players of all levels.

Staking tool set that includes both the anvil and swage/punch. The set works with standard turret and eyelet sizes commonly used in amplifiers. The anvil also can be used with Y style turrets.

6-Piece Mini-driver Kit. Features:

• Miniature version of compact convertible set. for precise detail work.
• Mini-drivers consist of jeweler's type and Phillips® screwdriver blades.
• Molded in color-coded plastic handles.
• Contains a black torque amplifier handle.
• Furnished in see-through plastic case.

An exclusive design from GrooveTech founder Dan Parks, this CaseTools Guitar Multi-Tool allows you to make quick tweaks to your Fender USA Guitar, and it’s small enough to fit right in the palm of your hand. It features four different sides: 1/8” ball-end hex wrench for truss rod adjustments, 1/16” and .05” hex wrenches for bridge adjustments, and a custom Phillips screwdriver bit shaped to handle both #1 and #2 screws like those in your neck and pickguard.

Heavy duty wire strippers with additional cutting and crimping features. Capable of stripping 12 through 24AWG stranded wires and 10 through 22AWG solid wires, these strippers can handle most wires used in electronics.

Extra long nose, Serrated jaws, Green cushion grips Product Features:

• Long needle nose pliers
• Extra long nose
• Features serrated jaws
• Features green cushion grips

Rocket Sockets by Pepers' Pedals allow for the tightening of various nuts for jacks, potentiometers and switches on guitar effects pedals without scratching the enclosure and damaging the graphics or paint as the typical metal tools will do.

Spring loaded center punch with an adjustable force for aligning pilot holes when drilling into materials. The large handle makes the push-to-strike action simple and accurate. Rotating the red handle adjusts the force amount.

Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.
Tools are:

• 8282 Zenith type Hex/Screwdriver
• 8606 5" Hex wrench
• 9091 Hex iron core tool
• 9300 5" Double sided hex tool
• 9304 Hex screwdriver combination
• 8608 Potentiometer Adjustment Tool

5" Overall Length, 3/4" Jaw Length. Great for cutting wire and component leads, etc. Product Features:

• Low profile, general-purpose cutter
• Superior blade by-pass shear cutting action
• Better cuts with half the effort
• Greatly reduced mechanical shock delivered to the work
• Features red grips
• Flush cuts soft wire up to 20 AWG (0.8mm)

Gear duster from Befaco. The Befaco Synth Duster is a great tool for getting dust off of faceplates and other hard to reach spots on your equipment. The super soft bristles can gently clean around pots, jacks, and other hardware.

Diamond fret file with offset shape for more comfortable fret dressing and improved clearance over the guitar body at high frets. Both full length concave filing grooves (for medium and wide fretwire) uniformly coated with micro industrial diamond particle.

5 1/2" Overall Length, 1 1/2" Jaw Length Product Features:

• Thin profile, long reach pliers
• For access into tight spaces
• Lightweight for maximum comfort
• For use in precision electronic assembly applications
• Features serrated jaws
• Features red grips

Simple and easy to use nut driving tool for the slotted nuts found on Qingpu jacks that are commonly used in Eurorack modules. The tool anchors into the sleeve of the jack ensuring no slippage when in use, protecting the faceplate from accidental damage. The two grip holes are cut to the size of M2.5 and M3 hex nuts and can be used in a pinch to tighten nuts of those sizes, or to hang your tool on a keyring! One side of the tool works with Mod "Top Brass" nuts and slotted W-QP-NUT-K nuts used on W-QP-518MA, W-QP-419GR, and W-QP-518MA-BM. The other side works with slotted W-QP-NUT-PJ-R nuts used on W-QP-PJ3410. Either side will work with Befaco Bananuts for 3.5mm jacks (W-BNUT-X). The nut driving tool is made of steel.

GrooveTech soundhole truss rod wrench for acoustic guitars. Acoustic guitar truss rods need adjustment just like electrics, but manufacturers sure don't make it easy. Access is typically through the sound hole, sometimes through a brace to an unseen nuts. These wrenches allow quick access to nuts on most makes and models of acoustics, with a precision ball-end tip for easy fit, extra length on both segments of the blade, and an oversized handle for confidence when making adjustments. Professional-grade.

Instructions

• Simply drill 3/8" hole insert cutting head and compress handles.
• Gives you the ability to make square holes for fuse holders, special connectors displays etc.

1. Material to be nibbled is placed in the gap between the punch and blade channel.
2. By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal.
3. A scribe line can be followed by looking down on work in this position.

Box cutter-style steel utility knife. This high quality, heavy-duty knife easily cuts tape, cartons, strapping and twine. Zinc die cast. Retractable with 3 blade-locking positions for safety. Includes three heavy-duty blades.

This Luthier's Digital Caliper has a custom jaw notch for accurately measuring fretwire crown height (the height above the fretboard). This is essential for comparing new wire to original wire. And there's a notch on the depth gauge to measure fret height on the instrument.

• Measures fret height before AND after fret installation
• Accurate readouts in inches or millimeters
• A must for all precision guitar work

The GrooveTech puts a new 'spin' on drum keys with a unique sliding 'T' handle that allows quick and easy changing of drum heads without power tools. The handle can be slid from one end to the other for extra leverage - especially useful for high-tension drum corps tuning. Fit and finish is top-drawer, using heat-treated chrome vanadium alloy with a polished chrome finish. The detachable ¼"' drive drum key socket is made to precise tolerances.

The X-ACTO #1 knife set is the classic X-Acto blade handle. The pointed tip of the sharp #11 blade allows for precise cutting. The #1 Knife is compatible with the 10, 12, 13, 16 and 17 X-Acto blades. Includes:

• X-Acto #1 Knife
• #11 blade
• Safety cap

The Dunlop System 65 Multi Tool is a compact tool that can cover the gamut of setup work for guitars and basses. Whether it’s a pickup height issue, truss rod adjustment, or a tweak in the action, this multitool can do it all.

Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - ½", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear. Add a dab of threadlocker, and you'll probably never have to deal with that loose jack again. Sockets are pro-grade with a dazzling polished chrome finish.