Tools

Adjustment Tool - Bourns Trimpots, H-90
Bourns trimmer adjustment tool. This tool is compatible with both the R-VT96Y-X multiturn trimmers and the R-VT62P-X single turn trimmers. The recessed end is especially helpful when used with the 3296Y trimmers to avoid slipping off of the screw adjuster. Features
  • Meets UL 94V-0
  • Pocket clip
  • For use on most trimmer shafts/rotors
  • Recessed end for use with extended shafts
  • RoHS compliant
Please Log In to view prices
The Nibbler - cutter for square holes
Instructions
  • Simply drill 3/8" hole insert cutting head and compress handles.
  • Gives you the ability to make square holes for fuse holders, special connectors displays etc.
  1. Material to be nibbled is placed in the gap between the punch and blade channel.
  2. By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal.
  3. A scribe line can be followed by looking down on work in this position.
Please Log In to view prices
Tool - GrooveTech, Jack / Pot Tool
Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - ½", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear. Add a dab of threadlocker, and you'll probably never have to deal with that loose jack again. Sockets are pro-grade with a dazzling polished chrome finish.
Please Log In to view prices
Seizer forceps - Xcelite, 5.5" straight nose, serrated jaws
Seizer forceps. Product Features:
  • Versatile tool with unusual holding qualities
  • Clamps firmly to hold wires for soldering
  • Acts as a heat sink and retrieves small parts from hard-to-reach places
  • Precision-machined from perfectly tempered stainless steel
  • Box-joint construction
  • 3-position snap lock
  • Serrated jaws
Please Log In to view prices
Tool - Slotted Nut Driver, for Qingpu Jacks
Simple and easy to use nut driving tool for the slotted nuts found on Qingpu jacks that are commonly used in Eurorack modules. The tool anchors into the sleeve of the jack ensuring no slippage when in use, protecting the faceplate from accidental damage. The two grip holes are cut to the size of M2.5 and M3 hex nuts and can be used in a pinch to tighten nuts of those sizes, or to hang your tool on a keyring! One side of the tool works with Mod "Top Brass" nuts and slotted W-QP-NUT-K nuts used on W-QP-518MA, W-QP-419GR, and W-QP-518MA-BM. The other side works with slotted W-QP-NUT-PJ-R nuts used on W-QP-PJ3410. Either side will work with Befaco Bananuts for 3.5mm jacks (W-BNUT-X). The nut driving tool is made of steel.
Please Log In to view prices
Staking Tool Set - Anvil and Punch, for Eyelets and Turrets
Staking tool set that includes both the anvil and swage/punch. The set works with standard turret and eyelet sizes commonly used in amplifiers. The anvil also can be used with Y style turrets.
Please Log In to view prices
Cutters - Xcelite, Shearcutter, General Purpose
5" Overall Length, 3/4" Jaw Length. Great for cutting wire and component leads, etc. Product Features:
  • Low profile, general-purpose cutter
  • Superior blade by-pass shear cutting action
  • Better cuts with half the effort
  • Greatly reduced mechanical shock delivered to the work
  • Features red grips
  • Flush cuts soft wire up to 20 AWG (0.8mm)
Please Log In to view prices
Staking Tool - for Eyelets and Turrets
Turret staking tool for use with our turrets (S-HTUR-AX, S-HTUR-BX, S-HTUR-P).
For anvil see S-T1717
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
Please Log In to view prices
Alignment Kit - GC Electronics, for color TVs
Package of 6
Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.
Tools are:
  • 8282 Zenith type Hex/Screwdriver
  • 8606 5" Hex wrench
  • 9091 Hex iron core tool
  • 9300 5" Double sided hex tool
  • 9304 Hex screwdriver combination
  • 8608 Potentiometer Adjustment Tool
Please Log In to view prices
Brush - Flat Chip, 2”, 1500, applicator
2 inch flat chip brush great for applying tolex glue or any other purposes. This brush features a 4.75 inch wood handle.
Please Log In to view prices
Center Punch - Spring Loaded, Adjustable Force
Spring loaded center punch with an adjustable force for aligning pilot holes when drilling into materials. The large handle makes the push-to-strike action simple and accurate. Rotating the red handle adjusts the force amount.
Please Log In to view prices
Springs - Xcelite, replacement for S-TCN255
Replacement spring for S-TCN255 (Xcelite curved nose pliers).
Please Log In to view prices
Brush - Befaco, Gear Duster
Gear duster from Befaco. The Befaco Synth Duster is a great tool for getting dust off of faceplates and other hard to reach spots on your equipment. The super soft bristles can gently clean around pots, jacks, and other hardware.
Please Log In to view prices
Desoldering Pump - Manual, for removing solder
Handheld desoldering pump for solder removal. The enhanced dual spring-loaded piston creates a powerful vacuum for easy removal of molten solder. The static free tip is self cleaning and made from a clog resistant material. The aluminum body is lightweight and durable.
Please Log In to view prices
String Cutters - GrooveTech, for guitar and bass
GrooveTech developed the String Cutters specifically for Guitar and Bass strings. Guitar and bass strings are made of hardened stainless steel or nickel with thicknesses as high as 3mm. Ordinary diagonal cutters are designed for soft copper, and thus fail miserably when used on strings. GrooveTech String Cutters were developed specifically for this application, using a proprietary heat-treatment process. Despite its compact five-inch length, even “B” bass strings cut easily and your days of dented blades will be a thing of the past. Vinyl grips feel great in your hands.
Please Log In to view prices
Wrench - Befaco, Bananut Driver
Custom wrench tool for Bananuts. The two pegs slot into the notches on the Bananuts for an easy installation. Note: This wrench is only compatible with Befaco Bananuts
Please Log In to view prices
Needle Nose Pliers - Xcelite, 6", long
Extra long nose, Serrated jaws, Green cushion grips Product Features:
  • Long needle nose pliers
  • Extra long nose
  • Features serrated jaws
  • Features green cushion grips
Please Log In to view prices
Multi-Tool - GrooveTech, for Guitar and Bass
Introducing the second generation of the GrooveTech Guitar/Bass Multi-Tool Introduced in 2008, the original GrooveTech Multi-Tool was an instant hit with guitar and bass players alike. Never before had a multi-tool provided such functionality or made use of pro-grade components. In spite of market acceptance, GrooveTech designers envisioned improvements and spent over two years developing a second generation tool that boasts significant advances. Like the original tool, both inch and metric hex wrenches are provided with ball-ends for truss rod sizes. Tool components use professional S2 steel with an attractive polished-chrome finish. Second-generation improvements include a 5/16" socket for Gibson and similar truss rod nuts, addition of 5mm and 1/16" hex wrenches, and a precision ruler with inch and metric scales.
Please Log In to view prices
Truss Rod Driver - GrooveTech
Vintage-style truss rod nuts have long, thin slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage – as evidenced on many vintage guitars and basses. GrooveTech developed two screwdrivers specifically for this application. Proper adjustment involves removal of the neck for full nut access, and our Standard Driver provides firm contact over the entire slot width for damage-free adjustment. The Cheater Driver™ allows quick minor adjustment without removing the neck. Both have oversized handles with extra-long shafts for a firm grip and easy access.
Please Log In to view prices
Wire Stripper / Cutter - 8", 10-24 AWG
Heavy duty wire strippers with additional cutting and crimping features. Capable of stripping 12 through 24AWG stranded wires and 10 through 22AWG solid wires, these strippers can handle most wires used in electronics.
Please Log In to view prices
Staking Tool - For Small Eyelets
Staking tool for small eyelets such as S-HEYE-B. Directions:
  • Drill hole using #42 drill bit
  • Insert eyelet
  • Flip board over onto a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
Please Log In to view prices
Pliers - Xcelite, serrated jaw, 5.5", Long Reach
5 1/2" Overall Length, 1 1/2" Jaw Length Product Features:
  • Thin profile, long reach pliers
  • For access into tight spaces
  • Lightweight for maximum comfort
  • For use in precision electronic assembly applications
  • Features serrated jaws
  • Features red grips
Please Log In to view prices
Fret File - Diamond, offset, for dressing and shaping frets
Diamond fret file with offset shape for more comfortable fret dressing and improved clearance over the guitar body at high frets. Both full length concave filing grooves (for medium and wide fretwire) uniformly coated with micro industrial diamond particle.
Please Log In to view prices
Guitar Nut Cube - for adjusting guitar nuts
Unique tool for the easy removal and adjustment of potentiometers and switches from guitars
Please Log In to view prices