Terminal Boards & Strips

Contact Pin - Nickel Plated Brass, Seamless, 0.566" Height
0.125" diameter nickel plated brass contact pin. Fits .062" and .093" boards. Height is .566" when mounted. In addition to turret board use, these pin connectors are often found on printed circuit boards. They are referred to as through hole terminal pins, header pins, or crimp contact pins.
Please Log In to view prices
Terminal Strip - PCB Terminal Block, 5mm Spacing, Screw Terminals
High quality PCB terminal blocks. These screw terminal blocks have a PBT base with plated brass terminals and combination head screws. These terminal blocks are great for making wired connections and can also be used in prototyping. The terminal spacing matches the pinout on 16mm PCB mount potentiometers such as R-VAMA-SS-PC and R-VAML-SS-PC. Features:
  • PBT Base
  • Angled 90° Orientation
  • Combo Phil-Slot Screws
  • Plated Brass Terminals
  • Single Row
  • 5mm (0.2”) Pin Spacing
  • 16A Current Rating
  • 250V Voltage Rating
Please Log In to view prices
Eyelets - Brass, .121 x .125 x .200; MT .0095, package of 10
Eyelets, bag of 10 (mounts in 1/8" hole).
package of 10
Please Log In to view prices
Turret Strip - 3 Lugs, Single Row, U-style
Single row of 3 U-style terminals on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.
Please Log In to view prices
Terminal Pin - PCB Mount, 0.05” Diameter, 0.25” Length
PCB mount terminal pin made of tinned brass. This pin fits 0.064” mounting holes and can be swage or solder mounted. The pin diameter is 0.05” and has a total length of 0.25” when mounted. Great for connecting offboard wiring by soldering directly to the pin or using an appropriate connector.
Please Log In to view prices
Eyelets - Plated Brass, Small, .089” x .125” x .150”
Tin plated brass eyelets commonly used on vintage style pickups. The small sized eyelets are also great for smaller point-to-point projects such as DIY stomp boxes. The outside diameter of the barrel is 0.089” and the recommended mounting hole is 0.093” using a #42 drill bit.
package of 10
Please Log In to view prices
Turret Strip - 5 Lugs, Single Row, U-style
Single row of 5 U-style terminals on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.
Please Log In to view prices
Turret Strip - 7 Lugs, Single Row, U-style
Single row of 7 U-style terminals on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.
Please Log In to view prices
PCB - Daughterboard for Wiring 3PDT Footswitches
Our 3PDT PCB daughterboard is a small board designed to simplify the wiring of 3PDT footswitches in guitar pedals. All inputs and outputs are clearly labeled on the PCB, removing any confusion about how the footswitch should be wired, and decreasing the chances of wiring mistakes or short-circuits.
Please Log In to view prices
Terminal Board - for Speaker Frames
Two lug terminal boards for speaker frames. This board can be used to repair speakers with damaged or missing wire mount boards.
Please Log In to view prices
Turret Strip - 9 Lugs, Single Row, U-style
Single row of 9 U-style terminals on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.
Please Log In to view prices
Turret Strip - 11 Lugs, Single Row, U-style
Single row of 11 U-style terminals on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.
Please Log In to view prices
Solder Tag - M3.5 or #6 Mounting Hole
Flat-washer style solder tag for use with M3.5 or #6 screws. This small solder tag is an easy way to add a wire such as a chassis ground connection to a build. This solder tag is also a great match for vintage style builds such as Fuzz Face style effects pedals.
  • Contact Material: Brass
  • Contact Plating: Tin
  • Inner Diameter: 3.5± 0.2 mm
  • Outer Diameter: Ø6.3 ± 0.2 mm
  • Length: 12.7 ± 0.5 mm
  • Thickness: 0.35 mm
package of 12
Please Log In to view prices
Turret Strip - 13 Lugs, Single Row, U-style
Single row of 13 U-style terminals on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.
Please Log In to view prices
PCB - Pseudo Eyelet Board, 7.5mm Spacing
PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 7.5mm horizontally and 26mm vertically.
Please Log In to view prices
PCB - Pseudo Eyelet Board, 6.35mm Spacing, 2 x 9
PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 6.35mm horizontally and 22mm vertically. The two mounting holes have a 3.2mm diameter to fit M3 or 4-40 hardware and also fit the S-H190 adhesive standoffs perfectly. 2x9 Board:
  • 2 rows of 9 eyelets (18 total)
  • 6.35mm x 22mm eyelet spacing
  • 55.44mm x 26.66mm board
  • 45mm spacing for 3.2mm mounting holes
  • Great fit for 1590B and Gorva C65 enclosures
Please Log In to view prices
PCB - Charge Pump, -9V from +9V, 3PDT Switch Mount
3PDT switch mounted charge pump PCB for positive ground effects. This small PCB simplifies the wiring of 3PDT foot switches in guitar pedals while also offering -9V when used with a standard +9V power supply. This is a great option for positive ground effects such as vintage fuzz pedals. The circuit of this PCB also features a protection diode and an LED indicator for when the effect is engaged.
This board is compatible with the MAX1044, TC1044S, TC7660S, and LT1054 charge pump ICs.
Please Log In to view prices
PCB - Pseudo Eyelet Board, 7.5mm Spacing, Phenolic Board
Phenolic PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. The spacing between pads is 7.5mm horizontally and 26mm vertically. The two mounting holes have a 3.2mm diameter to fit M3 or 4-40 hardware and also fit the S-H190 adhesive standoffs perfectly. See P-HTB-X for black version. See P-HTB-PG-X for premium black version. 2x8 Board:
  • 2 rows of 8 eyelets (16 total)
  • 7.5mm x 26mm eyelet spacing
  • 57.15mm x 30.66mm board
  • 45mm spacing for 3.2mm mounting holes
  • Great fit for 125B and 1590N1 enclosures

2x12 Board:
  • 2 rows of 12 eyelets (24 total)
  • 7.5mm x 26mm eyelet spacing
  • 87.15mm x 30.66mm board
  • 75mm spacing for 3.2mm mounting holes
  • Great fit for 1590BB enclosures
Please Log In to view prices
Turret Strip - 16 Lugs, Two Rows, U-style
Two rows of 8 U-style terminals (16 total) on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.
Please Log In to view prices
PCB - Charge Pump, -9V from +9V, Screw Mount
Screw mounted charge pump PCB for positive ground effects. This small PCB provides -9V when used with a standard +9V power supply. This is a great option for positive ground effects such as vintage fuzz pedals. The PCB has a low profile design and is a simple addition to any build using a standoff to mount the board. This board is compatible with the MAX1044, TC1044S, TC7660S, and LT1054 charge pump ICs.
Please Log In to view prices
Turret Strip - 12 Lugs, Two Rows, U-style, Extra Dense
Two rows of 6 U-style terminals (12 total) on a black board. This U-style terminal strip is extra dense with 6.35mm terminal spacing allowing for even more densely populated point-to-point builds. The boards are 0.063” thick.
Please Log In to view prices
PCB - Pseudo Eyelet Board, 2X8, 9.1mm Spacing, Phenolic Board
Phenolic PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. The spacing between pads is 9.1mm horizontally and 34.4mm vertically. The two mounting holes have a 3.2mm diameter to fit M3 or 4-40 hardware and also fit the S-H190 adhesive standoffs perfectly. See P-HTB-X for 7.5mm spacing 2x8 Board:
  • 2 rows of 8 eyelets (16 total)
  • 9.1mm x 34.4mm eyelet spacing
  • 69.42mm x 40.1mm board
  • 54.6mm spacing for 3.2mm mounting holes
  • Great fit for 1590P1, Gorva S90, and YY slanted enclosures
Please Log In to view prices
Turrets - mounting, for use on 2mm boards
Colors Available:
Turrets for use on boards measuring 2mm thick. For 3mm boards, see S-HTUR-SG-3X
Stake and anvil required for mounting.
  • Staking Tool is our part number: S-T1715
  • Anvil is our part number S-T1717
  • For a budget tool set see S-T-STAKE-SET
package of 10
Please Log In to view prices
Solder Lug - #6 or #8 Hole, Locking
Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10
package of 10
Please Log In to view prices