Terminal Boards & Strips

Board - Marshall, Replacement for JCM 2000 DSL 100
Replacement board for Marshall JCM 2000 DSL 100 amplifiers which frequently have issues with original boards. This replacement can bring your amp back to life!
Please Log In to view prices
PCB - Marshall, Valve PCB TSL100 / TSL122, Rev 20
Marshall PC Board for TSL 100 / 122. Rev 20.
Please Log In to view prices
Kit - Fender® Stratocaster® Mid Boost Kit
Genuine Fender® Mid Boost upgrade kit for Strats with active electronics. This circuit is used in the signature Eric Clapton and Buddy Guy strats and is commonly referred to as the Clapton Boost. The Mid Boost knob adjusts gain from 0 dB (no boost) to 25 dB (maximum boosted mids). This boost sounds great clean and adds powerful control to distortion.
Please Log In to view prices
Terminal Board - two 9 Pin sockets, 2 x 12 lugs
Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
Please Log In to view prices
PC Board - Dunlop, replacement for Crybaby
Original Crybaby replacement circuit board for pedals made after 1990. Original Dunlop replacement part.
Please Log In to view prices
Terminal Board - one 8 Pin socket, 2 x 6 lugs
Single socket, 2 rows/6 lugs per row, 4 mounting holes. Board dimensions 3" x 3". Terminals are not pre-wired.
Please Log In to view prices
Turret Board - Black, 2mm, 5F6A Layout, 2 pcs
Turret board with pre installed turrets designed to be used to build a 5F6A layout or variants. Includes the required 2 pieces
  • 2mm board
  • 5F6A Layout
  • Includes 2 pieces
package of 2
Please Log In to view prices
Staking Tool - for Eyelets and Turrets
Turret staking tool for use with our turrets (S-HTUR-SG-2X, S-HTUR-SG-3X, S-HTUR-PR-3S).
For anvil see S-T1717
For smaller staking tool, see S-T1714
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
Please Log In to view prices
Staking Tool - For Small Eyelets
Staking tool for small eyelets such as S-HEYE-B. Directions:
  • Drill hole using #42 drill bit
  • Insert eyelet
  • Flip board over onto a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
Please Log In to view prices
Turret Board - Black, 3mm, Loaded with 52 Turrets, 258mm x 76mm
258 x 76 mm, loaded with 52 turrets, 3 mm board thickness. This is designed for a for a JTM45 board. Our turrets, part number S-HTUR-BX will fit on this board.
Please Log In to view prices
Tool - Anvil for Turret Terminals, .750 L
Turret anvil for use with our turrets (S-HTUR-SG-2X, S-HTUR-SG-3X, S-HTUR-PR-3S).
For staking tool see S-T1715
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
Please Log In to view prices
Turret Board - Black, 2mm, Loaded with 33 Turrets, 230mm x 70mm
230 x 70 mm, loaded with 33 turrets,2 mm board thickness. This is designed for a 5E3 board.
Please Log In to view prices
Terminal Strip - Mini, 3 Lug, 2nd Lug Common, Horizontal
Mini size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 1/4" centers.
package of 5
Please Log In to view prices
Terminal Strip - Mini, 5 Lug, 3rd Lug Common, Horizontal
Mini size terminal strips, 1/16" thick phenolic, tin plated brass solder lugs and brackets on 1/4" centers.
package of 5
Please Log In to view prices
Staking Tool Set - Anvil and Punch, for Eyelets and Turrets
Staking tool set that includes both the anvil and swage/punch. The set works with standard turret and eyelet sizes commonly used in amplifiers. The anvil also can be used with Y style turrets.
Please Log In to view prices
Turret Board - 2mm, Loaded with 60 Turrets, 300mm x 60mm
300mm x 60mm turret board conveniently pre-loaded with 2 rows of 30 turrets. Save yourself some time loading the board and move on to building your project!
  • Accepts 2mm turrets.
Please Log In to view prices
Terminal Strip - 2 rows, 12 turrets per row
2 rows/12 lugs per row, 2 mounting holes, 5 ¼" x 1 ¼" board dimensions.
Please Log In to view prices
Turret Board - Blank, No Holes, Black G-10, 11-⅞" x 7-1/16”
Oversized blank G-10 epoxy boards perfect for custom turret or eyelet boards. The large size can be cut down to make multiple boards. With no predilled holes, builders can make clean custom layouts for their projects.
Please Log In to view prices
Tagboard - 40 Turret Pins, High Quality
200mm x 45mm turret board with two rows of of 20 turrets. These turrets are seamless contact pin style turrets. Each turret features an additional solderpad for adding additional components or wiring. This board has four mounting holes.
Please Log In to view prices
PCB - Pseudo Eyelet Board, ½” Spacing, Generic AB763, 3 x 29
Pseudo eyelet boards with 3 rows of ½” spacing. These 2mm thick boards have a vertical spacing of 1” from row to row. The pseudo eyelet PCBs have similar styling to the eyelet/fiberboard used in vintage equipment. The size and layout of the 3 x 29 works well for AB763 style builds. For a blank board to pair with this one for use as an insulator, see P-HBB-3X29.
  • 3 rows of 29 eyelets (87 total)
  • 0.5” x 1” eyelet spacing
  • 14.5” x 2.5” board
  • Great fit for AB763 style builds
Please Log In to view prices
Turret Board - Blank, No Holes, Black FR-4, 14.5” x 2.5”, 2mm Thick, AB763 Size
AB763 sized blank FR-4 epoxy boards perfect for custom turret or eyelet boards. With no predilled holes, builders can make clean custom layouts for their projects. This board can also be used as the insulator for the P-HTBW-3X29 generic AB763 layout pseudo eyelet board.
Please Log In to view prices
Terminal Strip - 2 rows, 6 turrets per row
2 rows/6 lugs per row, 2 mounting holes. Board dimensions 3" x 1 ¼".
Please Log In to view prices
Terminal Strip - 1 row, 12 turrets per row
1 row/12 lugs per row. 2 mounting holes. Board dimensions 5 ¼" x ½".
Please Log In to view prices
Turret Board - Blank, 189 Holes, 10 ⅛” x 2 ⅝”, Phenolic
Vintage style phenolic turret boards with a 3mm thickness. The phenolic material matches the appearance and construction of those used in classic amplifiers from Marshall and others. These boards are made of the highest grade phenolic material and are rated for high voltage applications. They have a high mechanical strength in addition to their high dielectric strength making them the perfect candidate for turret board based tube amplifiers.
This 189 hole version has 7 rows and 27 columns. This size can be found in vintage Marshall amps such as the 1973 and 1974 18W amps, 20W amps such as the 2022T JMP Tremolo 20, 2061 Lead-Bass, PA20, and the 10W 1930 Popular.
Complete the vintage turret board look with S-HTUR-PR-BI-3S turrets.
Please Log In to view prices