Terminal Boards & Strips

Board - Marshall, Replacement for JCM 2000 DSL 100
Replacement board for Marshall JCM 2000 DSL 100 amplifiers which frequently have issues with original boards. This replacement can bring your amp back to life!
Please Log In to view prices
PCB - Marshall, Valve PCB TSL100 / TSL122, Rev 20
Marshall PC Board for TSL 100 / 122. Rev 20.
Please Log In to view prices
Kit - Fender® Stratocaster® Mid Boost Kit
Genuine Fender® Mid Boost upgrade kit for Strats with active electronics. This circuit is used in the signature Eric Clapton and Buddy Guy strats and is commonly referred to as the Clapton Boost. The Mid Boost knob adjusts gain from 0 dB (no boost) to 25 dB (maximum boosted mids). This boost sounds great clean and adds powerful control to distortion.
Please Log In to view prices
Terminal Board - two 9 Pin sockets, 2 x 12 lugs
Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
Please Log In to view prices
PC Board - Dunlop, replacement for Crybaby
Original Crybaby replacement circuit board for pedals made after 1990. Original Dunlop replacement part.
Please Log In to view prices
Terminal Board - one 8 Pin socket, 2 x 6 lugs
Single socket, 2 rows/6 lugs per row, 4 mounting holes. Board dimensions 3" x 3". Terminals are not pre-wired.
Please Log In to view prices
Turret Board - Black, 2mm, 5F6A Layout, 2 pcs
Package of 2
Turret board with pre installed turrets designed to be used to build a 5F6A layout or variants. Includes the required 2 pieces
  • 2mm board
  • 5F6A Layout
  • Includes 2 pieces
Please Log In to view prices
Turret Board - Black, 3mm, Loaded with 52 Turrets, 258mm x 76mm
258 x 76 mm, loaded with 52 turrets, 3 mm board thickness. This is designed for a for a JTM45 board. Our turrets, part number S-HTUR-BX will fit on this board.
Please Log In to view prices
Staking Tool - For Small Eyelets
Staking tool for small eyelets such as S-HEYE-B. Directions:
  • Drill hole using #42 drill bit
  • Insert eyelet
  • Flip board over onto a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
Please Log In to view prices
Turret Board - Black, 2mm, Loaded with 33 Turrets, 230mm x 70mm
230 x 70 mm, loaded with 33 turrets,2 mm board thickness. This is designed for a 5E3 board.
Please Log In to view prices
Tool - Anvil for Turret Terminals, .750 L
Turret anvil for use with our turrets (S-HTUR-AX, S-HTUR-BX, S-HTUR-P).
For staking tool see S-T1715
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
Please Log In to view prices
Staking Tool Set - Anvil and Punch, for Eyelets and Turrets
Staking tool set that includes both the anvil and swage/punch. The set works with standard turret and eyelet sizes commonly used in amplifiers. The anvil also can be used with Y style turrets.
Please Log In to view prices
Staking Tool - for Eyelets and Turrets
Turret staking tool for use with our turrets (S-HTUR-AX, S-HTUR-BX, S-HTUR-P).
For anvil see S-T1717
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
Please Log In to view prices
Terminal Strip - 2 rows, 12 turrets per row
2 rows/12 lugs per row, 2 mounting holes, 5 ¼" x 1 ¼" board dimensions.
Please Log In to view prices
Turret Board - 2mm, Loaded with 60 Turrets, 300mm x 60mm
300mm x 60mm turret board conveniently pre-loaded with 2 rows of 30 turrets. Save yourself some time loading the board and move on to building your project!
  • Accepts 2mm turrets.
Please Log In to view prices
Turret Board - Blank, No Holes, Black G-10, 11-⅞" x 7-1/16”
Oversized blank G-10 epoxy boards perfect for custom turret or eyelet boards. The large size can be cut down to make multiple boards. With no predilled holes, builders can make clean custom layouts for their projects.
Please Log In to view prices
Tagboard - 40 Turret Pins, High Quality
200mm x 45mm turret board with two rows of of 20 turrets. These turrets are seamless contact pin style turrets. Each turret features an additional solderpad for adding additional components or wiring. This board has four mounting holes.
Please Log In to view prices
Terminal Strip - 2 rows, 6 turrets per row
2 rows/6 lugs per row, 2 mounting holes. Board dimensions 3" x 1 ¼".
Please Log In to view prices
Terminal Strip - 1 row, 12 turrets per row
1 row/12 lugs per row. 2 mounting holes. Board dimensions 5 ¼" x ½".
Please Log In to view prices
Terminal Strip - 8 Lug, 1st & 8th Lug Common, Horizontal
Package of 5
Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 8 lugs, first and eighth lug common.
Please Log In to view prices
Terminal Strip - 5 Lug, 1st Lug Common, Horizontal, package of 5
Package of 5
Standard size terminal strips, 1/16 thick bakelitetin plated steel solder lugs and brackets on 3/8" centers. 5 lug 1 ground first lug common
Please Log In to view prices
Terminal Strip - 6 Lug, 1st & 6th Lug Common, Horizontal
Package of 5
Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 6 lugs, first and sixth lug are common.
Please Log In to view prices
Turret Board - Blank, 2 mm, 180 Holes, 300mm x 60mm
Blank board 300mm x 60mm, 2mm thick Glass epoxy unclad laminate.
  • Accepts 2mm turrets.
Please Log In to view prices
Tagboard - 300mm x 56mm, 2 x 28 Tags
300mm x 56mm tagboard with two rows of 28 tags. Each connector features two lugs, one facing inward and one facing outward. This can be helpful when connecting components using the inner lugs which leaves the outside lugs open for wiring. A center row of holes can be used for running wires beneath the board as well as for standoffs.
Please Log In to view prices