Terminal Boards & Strips

P-PC-ZM-2 PCB - Vintage Style Circuit Board, Zonk II, Phenolic Board w/ mount
Zonk II style circuit board made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This board is a recreation of the circuit board found in the Zonk II pedal. The board is styled after the version that featured silicon transistors and a printed circuit rather than a stripboard construction. It is actually a cut down version of the Shatterbox PCB using only the fuzz side of that pedal. When drawing the layout, original boards were closely referenced to ensure a proper match and fit. The copper traces have a surface treatment providing protection from corrosion. This board includes a blank mounting PCB. This PCB sits directly beneath the main board to mount it directly to the enclosure using screws. For a detailed drawing of the parts and connections originally used on this board, please see the layout drawing linked below.
Please Log In to view prices
S-T1714 Staking Tool - For Small Eyelets
Staking tool for small eyelets such as S-HEYE-B. Directions:
  • Drill hole using #42 drill bit
  • Insert eyelet
  • Flip board over onto a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
Please Log In to view prices
P-HTAG-16 Tagboard - 300mm x 16mm, 26 Tags, single row
300mm x 16mm tagboard with a single row of 26 tags. Each connector features two lugs for easy wiring. This board can be used for stand alone projects or can be used to expand the P-HTAG-56. This board features four mounting holes.
Please Log In to view prices
P-HTB-PG-X PCB - Premium Pseudo Eyelet Board, 7.5mm Spacing
Premium versions of the pseudo eyelet boards with 7.5mm spacing. The premium versions feature 2.4mm thick boards with gold plated contacts. These PCBs have similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 7.5mm horizontally and 26mm vertically. The two mounting holes have a 3.2mm diameter to fit M3 or 4-40 hardware and also fit the S-H190 adhesive standoffs perfectly. For standard versions, see P-HTB-X. 2x8 Board:
  • 2 rows of 8 eyelets (16 total)
  • 7.5mm x 26mm eyelet spacing
  • 57.15mm x 30.66mm board
  • 45mm spacing for 3.2mm mounting holes
  • Great fit for 125B and 1590N1 enclosures

2x12 Board:
  • 2 rows of 12 eyelets (24 total)
  • 7.5mm x 26mm eyelet spacing
  • 87.15mm x 30.66mm board
  • 75mm spacing for 3.2mm mounting holes
  • Great fit for 1590BB enclosures
Please Log In to view prices
P-TB9-2-2 Terminal Board - two 9 Pin sockets, 2 x 12 lugs
Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
Please Log In to view prices
P-HTUR-STRIP-9 Turret Strip - 95mm x15.875mm , loaded with 9 turrets
Turret strip, with 9 turrets. Measures 95mm x 15.875mm.
Please Log In to view prices
P-TB8-1-2 Terminal Board - one 8 Pin socket, 2 x 6 lugs
Single socket, 2 rows/6 lugs per row, 4 mounting holes. Board dimensions 3" x 3". Terminals are not pre-wired.
Please Log In to view prices
P-PC-FUZZ-FZ1 PCB - Vintage Style Circuit Board, FZ-1 Fuzz, Phenolic Board
FZ-1 fuzz circuit board made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This board is a recreation of the circuit board found in Maestro FZ-1 pedals. The board is styled after the original version that can also be found in early serial Maestro FZ-1A pedals. When drawing the layout, original boards were closely referenced to ensure a proper match and fit. This board is intended for use with S-HEYE-A eyelets (sold separately). The build style is very straightforward with point to point connections. For a detailed drawing of the parts and connections originally used on this board, please see the layout drawing linked below.
Please Log In to view prices
P-PC-SBOX PCB - Vintage Style Circuit Board, Shatterbox, Phenolic Board w/ mount
Shatterbox style circuit board made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This board is a recreation of the circuit board found in the Shatterbox pedal. The board is styled after the later version with a printed circuit rather than a stripboard construction. This is the same board that was used in the “split board” version which can be built by cutting the board down the middle to separate the fuzz section from the treble booster section. When drawing the layout, original boards were closely referenced to ensure a proper match and fit. The copper traces have a surface treatment providing protection from corrosion. This board includes a blank mounting PCB. This PCB sits directly beneath the main board to mount it directly to the enclosure using screws.
Please Log In to view prices
P-HBB-3X29 Turret Board - Blank, No Holes, Black FR-4, 14.5” x 2.5”, 2mm Thick, AB763 Size
AB763 sized blank FR-4 epoxy boards perfect for custom turret or eyelet boards. With no predilled holes, builders can make clean custom layouts for their projects. This board can also be used as the insulator for the P-HTBW-3X29 generic AB763 layout pseudo eyelet board.
Please Log In to view prices
P-HTBW-3X29 PCB - Pseudo Eyelet Board, ½” Spacing, Generic AB763, 3 x 29
Pseudo eyelet boards with 3 rows of ½” spacing. These 2mm thick boards have a vertical spacing of 1” from row to row. The pseudo eyelet PCBs have similar styling to the eyelet/fiberboard used in vintage equipment. The size and layout of the 3 x 29 works well for AB763 style builds. For a blank board to pair with this one for use as an insulator, see P-HBB-3X29.
  • 3 rows of 29 eyelets (87 total)
  • 0.5” x 1” eyelet spacing
  • 14.5” x 2.5” board
  • Great fit for AB763 style builds
Please Log In to view prices