Terminal Boards & Strips

Turrets - mounting, for use on 3mm boards
Colors Available:
Turrets for use on boards measuring 3mm thick, such as P-HTUR-189-3BK or P-HTUR-189-3R. For 2mm boards, see S-HTUR-SG-2X
Stake and anvil required for mounting.
  • Staking Tool is our part number: S-T1715
  • Anvil is our part number S-T1717
  • For a budget tool set see S-T-STAKE-SET
package of 10
Please Log In to view prices
Eyelets - Brass, .121 x .125 x .200; MT .0095, package of 10
Eyelets, bag of 10 (mounts in 1/8" hole).
package of 10
Please Log In to view prices
Turrets - mounting, for use on 2mm boards
Colors Available:
Turrets for use on boards measuring 2mm thick. For 3mm boards, see S-HTUR-SG-3X
Stake and anvil required for mounting.
  • Staking Tool is our part number: S-T1715
  • Anvil is our part number S-T1717
  • For a budget tool set see S-T-STAKE-SET
package of 10
Please Log In to view prices
Eyelets - Plated Brass, Small, .089” x .125” x .150”
Tin plated brass eyelets commonly used on vintage style pickups. The small sized eyelets are also great for smaller point-to-point projects such as DIY stomp boxes. The outside diameter of the barrel is 0.089” and the recommended mounting hole is 0.093” using a #42 drill bit.
package of 10
Please Log In to view prices
Turrets - 0.172" Long, Brass, Premium, Package of 10
Hollow Turret Terminal,Brass, .172" Long, Premium.
  • Finish/Plating: Tin
  • For Panel Thickness: .125 [3.2]
  • Material: Brass
  • Mounting Hole: 0.116
  • Terminal Length: 0.312
  • Terminal Style: Tubular Turret
  • Type: Solder Turret Terminal
  • Package of 10
package of 10
Please Log In to view prices
Solder Tag - M3.5 or #6 Mounting Hole
Flat-washer style solder tag for use with M3.5 or #6 screws. This small solder tag is an easy way to add a wire such as a chassis ground connection to a build. This solder tag is also a great match for vintage style builds such as Fuzz Face style effects pedals.
  • Contact Material: Brass
  • Contact Plating: Tin
  • Inner Diameter: 3.5± 0.2 mm
  • Outer Diameter: Ø6.3 ± 0.2 mm
  • Length: 12.7 ± 0.5 mm
  • Thickness: 0.35 mm
package of 12
Please Log In to view prices
Contact Pin - Nickel Plated Brass, Seamless, 0.566" Height
0.125" diameter nickel plated brass contact pin. Fits .062" and .093" boards. Height is .566" when mounted. In addition to turret board use, these pin connectors are often found on printed circuit boards. They are referred to as through hole terminal pins, header pins, or crimp contact pins.
Please Log In to view prices
Turrets - Bifurcated, Brass, Premium, for use on 3mm boards
High quality bifurcated (slotted) turrets with a hollow post. These terminals are made of annealed brass with a 100% tin over nickel plating. These slotted turrets closely resemble those found in vintage Marshall amps.
  • Triple turret with slot
  • 9.12mm height when installed
  • 3.18mm diameter
  • For 3.0mm to 3.2mm panel thickness
  • Recommended for mounting holes sized 2.68mm to 2.78mm
  • Bright 100% tin finish
  • Knurled underside of shoulder to prevent rotation once swaged

Stake and anvil required for mounting.
  • Staking Tool is our part number: S-T1715
  • Anvil is our part number S-T1717
  • For a budget tool set see S-T-STAKE-SET
package of 10
Please Log In to view prices
Terminal Pin - PCB Mount, 0.05” Diameter, 0.25” Length
PCB mount terminal pin made of tinned brass. This pin fits 0.064” mounting holes and can be swage or solder mounted. The pin diameter is 0.05” and has a total length of 0.25” when mounted. Great for connecting offboard wiring by soldering directly to the pin or using an appropriate connector.
Please Log In to view prices
Turrets - Bifurcated, for use on 3mm boards
Bifurcated turrets for use on boards measuring 3mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 2mm boards, see S-HTUR-BI-2S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
package of 10
Please Log In to view prices
Staking Tool Set - Anvil and Punch, for Eyelets and Turrets
Staking tool set that includes both the anvil and swage/punch. The set works with standard turret and eyelet sizes commonly used in amplifiers. The anvil also can be used with Y style turrets.
Please Log In to view prices
Staking Tool - for Eyelets and Turrets
Turret staking tool for use with our turrets (S-HTUR-SG-2X, S-HTUR-SG-3X, S-HTUR-PR-3S).
For anvil see S-T1717
For smaller staking tool, see S-T1714
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
Please Log In to view prices
Turrets - Bifurcated, Screw Mount
Bifurcated turrets with a screw mount that works on boards with thicknesses of 1.5mm to 4mm. Made of gold plated brass. These are sometimes referred to as split or forked turrets. Includes a mounting washer, lock washer, and mounting nut. The staking tool is not required for these turrets.
package of 10
Please Log In to view prices
Tool - Anvil for Turret Terminals, .750 L
Turret anvil for use with our turrets (S-HTUR-SG-2X, S-HTUR-SG-3X, S-HTUR-PR-3S).
For staking tool see S-T1715
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
Please Log In to view prices
Turrets - Bifurcated, for use on 2mm boards
Bifurcated turrets for use on boards measuring 2mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 3mm boards, see S-HTUR-BI-3S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
package of 10
Please Log In to view prices
Staking Tool - For Small Eyelets
Staking tool for small eyelets such as S-HEYE-B. Directions:
  • Drill hole using #42 drill bit
  • Insert eyelet
  • Flip board over onto a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
Please Log In to view prices