Now you can get into all the hard to reach places with the new CAIG FLEX-TIP™ - Extension Tube for Perfect-Straw™.

• Reduces straw diameter at tip
• Reduces flow
• Flexible - Get to Hard to reach places (1.5" length)
• Fits ALL Perfect-Straw™ Tubes
• Chemically resistant tube

Set of five Stratocaster® tremolo tension springs for use on American Vintage series and Custom Shop instruments.

• Set of five nickel-plated steel tremolo tension springs
• For American Vintage series and Custom Shop instruments

Included in the PA-9ECD Deluxe Kit and also sold separately, the Cable-Black/R allows the user to power over-sized effect units or units w/AC jacks in hard-to-reach places off of the Power-All Daisy Chain. The Cable-Black can be connected to any plug on any Power-All daisy chain, or directly to the ECO-Dapter® itself.

Replacement upper belt tension spring for Leslies.

Included in the PA-9ECD Deluxe Kit and also sold separately, the Cable-Blue/R features a right-angle jack that allows users to power effect units that use a ⅛" (3.5 MM) phone plug connector with tip-positive polarity. The Cable-Blue/R can be connected to any male jack on the Cable-5 Daisy Chain, or directly to the ECO-Dapter® itself.

Sealed upper tension idler bearing for Leslies

Included in the PA-9ECB Basic Kit, PA-9ECD Deluxe Kit, and also available separately, the Cable-Green Right Angle jumper allows the user to power Line-6 Stomp-Box modelers and other digital effect units from the ECO-Dapter®. The Cable-Green features a reverse-polarity (tip positive), right-angle male barrel connector with a larger, 2.5 mm internal diameter and spring-loaded clips. The Cable-Green/R can be used with Line-6 Modelers, Electro-Harmonix units, and other pedals requiring a larger internal diameter plug. the Cable-Green/R can be connected to the male plugs on any Power-All Daisy Chain, or directly to the ECO-Dapter® itself.

Spring steel tooth-lock washer. Uses internal teeth for locking and tension.

Black oxide finished steel lock washers that use internal teeth for locking and tension. The internal teeth dig into the screw head or nut while the smooth outside edge won't snag objects. These washers provide greater vibration resistance than split lock washers. Black oxide lock washers like these can be found in vintage Marshall amplifiers. Pairs nicely with S-HSB4-X, S-HSB6-X, and S-HSB8-12 screws and S-HBNX nuts.

This spring helps set your tremolo arm in a fixed position when used with any Fender® American series or American Standard series tremolo. Simply insert spring into tremolo arm receptacle prior to installing tremolo arm. Package includes twelve tension springs. Used in Custom Shop, American Series, American Vintage, American Standard (USA), and Classic, Deluxe, and Road Worn® Series (Mexico) instruments.

Single position machine pin sockets. These pressfit sockets are mounted by inserting into a PCB hole and applying some force. They stay firmly in place with tension and can then be easily soldered to the circuit board. These sockets can fit any pin spacing, such as the non-standard 0.15” spacing of the vintage-style stripboard (vs. 0.10” on standard stripboard). They can also jump rows so that they are not all in a line. The press-fit machine pin sockets are also very low profile and have a very minimal impact on the resulting look of the build. For pins sizes .015 -.025". The recommended mounting hole diameter is 0.057".

Vibramate String Spoiler For Bigsby Vibratos The Vibramate String Spoiler is an ingenious little bracket designed to fit right onto your existing Bigsby vibrato without any modifications or special tools. It easily slips right into place and is held in position by the tension of the strings when tuned to pitch. The Spoiler makes string changes so easy you'll wonder how you ever lived without it. No more need for wrapping the strings around and under the vibrato roller with needle-nose pliers in an attempt to get the ball onto that little pin. Multiple color options available.

Stainless steel lock washers that use external teeth for locking and tension. The external teeth dig into the screw head or nut and the joint. These washers provide greater vibration resistance than split lock washers. Steel lock washers like these can be found in vintage Fender® blackface, silverface, and tweed amplifiers for securing hardware, transformers, and speakers.

Tremolo tension springs. Similar to P-GTSPRN-5 but generic manufacture.

Wah pedal enclosure, bottom, and foot-pedal shell and hardware. Enclosure shell & foot pedal are cast aluminum.

Fender® Telecaster string guide Features:

• Plated-steel single-disc string guide (string tree)
• Minimizes sympathetic overtones caused by low string tension over the nut
• Includes string guide and slotted mounting screw
• Originally used on early ‘50s Telecaster and Esquire® guitars
• Fits most vintage and modern Telecaster® guitars

Spring steel tooth-lock washer. Uses internal teeth for locking and tension. The 0.25 inch size fits Carling mini toggle switches along with any other ¼” bushing item.

Steel lock washers that use both internal and external teeth for locking and tension. The teeth dig into the screw head or nut and the joint. These washers provide greater vibration resistance than split lock washers. Steel lock washers like these can be found in vintage Fender® blackface and silverface amplifiers for securing speakers to the cabinet. These washers have a zinc finish.

Made in U.S. vintage spec ABR-1 bridge with no retaining wire. Bridge posts and thumb screws included.
The bridge uses string tension along with the set screws to secure the brass saddles onto the bridge. The spacing and mounting hardware also match the original spec of this bridge with threaded posts that mount directly to the body and thumbwheels for height adjustments.

These guitar machines are a triumph in engineering and styling. The housing provides a maximum bearing for worm, gear and string post. Gear ratio is 14:1. Worm and gear are precision-cut for perfect meshing. This eliminates backlash and slippage. Countersunk tension screw permits player to regulate turning tension to any degree. Gear box has a special lubricant for lifetime, trouble-free service. Includes ⅝" washers, bushings and wood screws.

Made in U.S. vintage spec ABR-1 bridge with no retaining wire and plated brass saddles. Hardware sold separately. See P-GKLU-KLP127X for a complete set. The bridge uses string tension along with the set screws to secure the brass saddles onto the bridge.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm

Grover style machine heads with threaded bushings for 10mm (13/32") diameter peg holes. Superior professional grade quality and precision made for those who demand nothing but the best for their guitars without breaking the bank. Featuring an 18:1 Gear Ratio and Gotoh's "Rock-Solid" technology so you dont have to worry about a post being misangled causing unproper tension on the strings. Hardware Included

Fender® bass guitar string guide
Features:

• Plated-steel single-disc string guide (string tree)
• Minimizes tuning problems and sympathetic overtones caused by low string tension over the nut
• Includes string guide and slotted mounting screw
• Used on vintage and modern Jazz Bass® and Precision Bass® guitars
• Designed to fit most vintage and modern bass guitars

These guitar machines are a triumph in engineering and styling. The housing provides a maximum bearing for worm, gear and string post. Gear ratio is 14:1. Worm and gear are precision-cut for perfect meshing. This eliminates backlash and slippage. Countersunk tension screw permits player to regulate turning tension to any degree. Gear box has a special lubricant for lifetime, trouble-free service. Includes 5/8” washers, bushings and wood screws.