Synth & Eurorack Parts / DIY

Our Synth & Eurorack Parts / DIY category is a curated list of items that are commonly found in synth/eurorack projects. The items and filters here do not represent our full lineup of parts. If you don't see what you are looking for, check out our main categories or send us a suggestion and we'll look into adding it.
Transistor - JFET, N-Channel, MMBFJ201, SOT-23
Surface mount MMBFJ201 JFET. Commonly used in place of the discontinued through-hole J201. These JFETs can be found in many effects pedals, synthesizers, and other projects. The MMBFJ201 is an N-Channel general purpose amplifier JFET. This device is designed primarily for low level audio and general purpose applications with high impedance signal sources.
Please Log In to view prices
Transistor - 2N5089, TO-92 case, NPN
General purpose low level, low noise amplifier. Silicon NPN transistor.
Please Log In to view prices
Breadboard - Solderable PCB, 3.00” x 1.90”
The SB400 Solderable PCB BreadBoard enables you to transfer your circuit and wires from a plug-in breadboard without recutting wires or changing your layout. The SB400 has the same pattern and spacing as a standard 400 connection point BB400 solderless plug-in breadboard. It has a standard 5-hole strip for each IC pin, just like solderless breadboards plus 4 power rails. However, it has the advantage that soldered joints provide a more reliable long-term connection than solderless contacts. The SB400 has four power rails like solderless breadboards, plus two bonus rails for power or signals. There are bonus two-hole pads along the centerline allowing DIL (dual in-line) headers to be used. BPS prototyping boards use high-quality FR4 glass epoxy PCBs for long life, with an anti-tarnish protective coating for easy soldering.
Please Log In to view prices
Switch - Carling, Mini Toggle, SPDT, 2-Position, PC Pins
Carling mini-toggle switch, SPDT, PC Pins. 2-Position.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • PC mount pins
Please Log In to view prices
Switch - Carling, Mini Toggle, DPDT, 3 Position, Lugs, Short Bat
Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 3-Position
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
  • Solder lugs
Please Log In to view prices
Dust Cap - For DC Power Jack, Standard Size
Dust cover for standard size DC power jacks. This cover is simple to install and can help protect the power jack on effects pedals and other electronics using this style of DC jack. Jack sold separately.
Please Log In to view prices
Op-Amp - TL072, Dual, Low-Noise, JFET Input, 8-Pin DIP
The TL072 is a high speed JFET input dual operational amplifier incorporating well matched, high voltage JFET and bipolar transistors in a monolithic integrated circuit. The device features high slew rates, low input bias and offset current, and low offset voltage temperature coefficient.
Please Log In to view prices
Capacitor - 50V, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 50VDC.
Please Log In to view prices
Integrated Circuit - Spin FV-1, DSP, Multi-Effect / Reverb
The Spin Semiconductor FV-1 is a complete reverb solution in a single IC. With integrated stereo ADC and DACs, the FV-1 can be treated like any other analog component in your product's signal path. The FV-1 can access a total of 16 programs, 8 are built into the internal ROM and the designer may elect to connect a serial EEPROM with 8 additional programs. By using an external EEPROM, the designer can distinguish his product from others by creating a custom program set without the need for a microprocessor in the system. With 3 potentiometer inputs, programs may have real time variable parameters such as decay time in a reverb, rate and depth in a chorus or frequency in a filter. These inputs are available as coefficients to your program and may be used independently of each other. The rich instruction set allows users to program effects of all kinds. With instructions like LOG and EXP, users can easily program audio expansion and compression routines.
Please Log In to view prices
Transistor - 2N6027 Programmable Unijunction
2N6027 programmable unijunction transistor often referred to as a PUT. The 2n6027 can be found in many tremolo effects pedal projects.
Please Log In to view prices
Knob - Small, Indicator Line, set screw
Colors Available:
The P-K380 is a high quality Davies 1510 clone. This classic design can be found on countless pedals, synths, amps and other equipment. The set screw uses a metal insert for additional stability and durability. This knob has an infilled painted indicator and fits 1/4" (6.35mm) pot shafts. The P-K380 pairs nicely with the color matched P-K801-BRASS-X knobs.
Please Log In to view prices
Transistor - AS194H, Matched Pair, Alfa, TO5-8 case, NPN
The AS194H is a junction isolated ultra well-matched monolithic NPN transistor pair with an order of magnitude improvement in matching over conventional transistor pairs. Electrical characteristics of these devices such as drift versus initial offset voltage, noise, and the exponential relationship of base-emitter voltage to collector current closely approach those of a theoretical transistor. Extrinsic base and emitter resistances are very low, giving very low noise and operating over a wide current range. To guarantee long term stability of matching parameters, internal clamp diodes have been added across the emitter-base junction of each transistor. These prevent degradation due to reverse biased emitter current, the most common cause of field failures in matched devices.
Please Log In to view prices
Knob - Scalloped Edge, Indicator Line, Set Screw
Colors Available:
Set screw knob with indicator line and scalloped edge. Measures .50" in diameter and .6" in height. Davies 1900H clone
Please Log In to view prices
Transistor - 2N5088, Bipolar, General Purpose
2N5088 NPN Bipolar Junction Transistor in TO-92 package
Please Log In to view prices
LED Bezel - for 3mm LED, used for mounting
Holder for mounting LEDs to panels.
Please Log In to view prices
Wire - 22 AWG Solid Core, PVC, 600V, 50 Foot Roll
Colors Available:
600V solid wire. UL style 1015, rated to 105 degrees C. Perfect for new projects, rewiring electrical equipment, or use in breadboards, perfboard, and veroboard/stripboard.
Please Log In to view prices
PadBoard - Double Sided, Plated Holes, 3.94” x 3.15”, Mounting Holes
The PadBoard-2 prototyping circuit board has a general purpose pad-per-hole pattern which is good for analog and digital use. It is a double-sided board with plated holes, which allows components to be soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board. Features
  • Pad-per-hole prototyping board with plated-thru holes. A square pad every 5th hole makes it easy to align components on top and bottom.
  • Double-sided high-quality FR4 glass-epoxy circuit board with plated holes. Components can be soldered to either side.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering. Lead free and RoHS compatible.
  • 31 x 39 holes, 0.037" holes are drilled on 0.1" (2.54mm) centers. Four 0.125” mounting holes.
  • Size2 = 100 x 80mm (3.94 x 3.15in), 1/16" thick (1.6mm)
Please Log In to view prices