Switches

Switch - Black Bat, Toggle, 4PST, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This 4PST switch is rated for 230VAC, 4.5A. Includes one hex nut and one knurled nut.
Please Log In to view prices
Switch - Black Bat, Toggle, SPST, On-Off, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This On-Off SPST switch is rated for 230VAC, 4.5A. Includes one hex nut and one knurled nut.
Please Log In to view prices
Switch - Black Bat, Toggle, DPST, On-Off/On-Off, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This On-Off SPST switch is rated for 230VAC, 4.5A. When in the up position, both switches are on. When in the down position, both switches are off. Includes one hex nut and one knurled nut.
Please Log In to view prices
Switch - Black Bat, Toggle, DPST, On-Off/Off-On, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This DPST switch is rated for 230VAC, 4.5A. When in the up position, the top switch is on and the bottom switch is off. When in the down position, the top switch is off and the bottom switch is on. Includes one hex nut and one knurled nut.
Please Log In to view prices
Switch Tips - Gretsch, Nickel knobs
Original Gretsch nickel switch knobs. Made in USA. Gretsch part number: 922-1042-000
package of 2
Please Log In to view prices
Relay - Panasonic, DPDT, 5V, Single Coil, Non-Latching
High quality non-latching relays from the Panasonic TQ series. These 5 volt relays are commonly used in pedals for true bypass switching. Relay switching can allow for a variety of options on pedal builds. Different footswitch modes can be obtained using the same momentary footswitch. Stereo switching using a standard footswitch is another possible option. Features:
  • Compact low profile size
  • Standard DIL spacing for easy PCB use and breadboard compatibility
  • Non-Latching
  • Single Coil
  • 5V Coil Voltage

For a latching version, please see P-RP-TQ2-L-5V.
Please Log In to view prices
Footswitch - DPDT, Momentary, Solder Lugs
DPDT momentary footswitch. AC125V/4A AC250V/2A. Rated for 50,000 make-and-break cycles at full load.
Please Log In to view prices
Switch - Switchcraft, Toggle, 3-way, for Les Paul
One of the most rugged and durable switches available for your Gibson Les Paul or similar two pickup guitars.
Please Log In to view prices
Switch Accessory - Mini Toggle Caps, Short Bat, 11 Colors
Colors Available:
Rubber caps / switch tips for mini toggle switches in a variety of colors. These are made for short sized toggle bats. Available in 11 different colors. See P-HTCAP-X for standard-length caps.
Please Log In to view prices
Washer - Flat, M12, Stainless Steel, Oversized
Colors Available:
Oversized M12 flat washers. These washers fit both metric (M12) and imperial (15/32) bushings for compatibility with the vast majority of foot switches and full-sized toggle switches. These oversized washers are a great way to add a distinctive look to projects.
Please Log In to view prices
Switch - Marshall Style, Rocker, Power for MG Amps, Black
Marshall style black On-Off rocker switch for MG amps. 0.51" x 0.76" Mounting Hole. DPST.
Please Log In to view prices
Switch - Les Paul 3 Position, US Retro-Fit, black base
3 Position Les Paul/PRS style switch. US Retro-fit, black.
Please Log In to view prices
Switch - Rotary, 1 Pole, 3 Position
High quality three position rotary switch commonly used as an impedance selector switch on tube amps. This rugged switch is rated for 6A at 125VAC and 3A at 250VAC. The flatted 6mm shaft can be used with the shaft adapter found in the accessories below to easily fit standard ¼” knobs. Mounting hardware included. SP3T.
Please Log In to view prices
Switch - Carling, Toggle, DPST, On-Off, Solder Lugs, Short Bat
Carling, DPST toggle, 2-position, On-Off with solder lugs (3A, 125V), .500"" toggle length, 0.465" bushing length.
Note: On-Off switches may sometimes be referred to as On-None-Off.
Please Log In to view prices
Relay Module - Lehle, Relay True Bypass Switching Unit
The LEHLE MODULE SW is a true bypass switching unit with relay and an active pop suppression function controlled by an intelligent microcontroller circuit, thereby allowing the LEHLE MODULE SW to switch even faster than mechanical switches, noise-free and without wear.
Please Log In to view prices
Switch - Fender®, Pickup Selector, Strat & Tele 3-Way
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality, 3 position switch with knob and mounting hardware.
Please Log In to view prices
Optocoupler - Xvive, Vactrol, VTL5C Series
High quality vactrols from Xvive. The Xvive vactrols are clones of the original Excelitas / Perkins-Elmer vactrols used in many effects pedals, synthesizers, compressors and other equipment. These vactrols feature a thick epoxy sealed casing. The VTL5C3 and VTL5C3/2 both have a steep slope, good dynamic range, a very low temperature coefficient of resistance, and a small light history memory.
Please Log In to view prices
Switch - Peavey, Rocker, SPST, On-Off
Peavey SPST rocker switch, On-Off, with molded dot to indicate 'on' position, can be used in Classic VTX. 5A 125VAC, 2A 250VAC
Please Log In to view prices
Switch - Switchcraft, Slide, DPTT, 3-Position
Genuine Switchcraft® DPTT 3-position slide switch for use on Mustang and Duosonic style guitars. This switch can be wired to operate in either On/Off/On or On/On/On configurations. Upgrade cheap or malfunctioning switches with these high quality replacements.
  • Recommended .75 control cavity depth
  • 1.406” center-to-center mounting hole spacing
  • #4-40 screws recommended for mounting
  • Screws not included
Please Log In to view prices
Tactile Switch - Tube Screamer Replacement, PCB Mount
PCB mounted tactile switch most commonly used as a replacement for faulty Tube Screamer footswitches. This Off-(On) SPST tactile switch is rated for 12VDC at 50mA.
Please Log In to view prices
PCB - Charge Pump, -9V from +9V, 3PDT Switch Mount
3PDT switch mounted charge pump PCB for positive ground effects. This small PCB simplifies the wiring of 3PDT foot switches in guitar pedals while also offering -9V when used with a standard +9V power supply. This is a great option for positive ground effects such as vintage fuzz pedals. The circuit of this PCB also features a protection diode and an LED indicator for when the effect is engaged.
This board is compatible with the MAX1044, TC1044S, TC7660S, and LT1054 charge pump ICs.
Please Log In to view prices
Switch - Rocker, Lighted Power, Used in JCM Series & Others
Lighted DPST On-Off power switch. Used in Marshall JCM series and others. 15/16" x 1-1/16" x 1" deep.
Please Log In to view prices
Switch - 3-Way lever for Telecaster
Oak 3 way lever switch for Tele® Standard U.S. size. Fits 1/16" x 1-1/16" slot.1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.
Please Log In to view prices
Knurled Nut - Carling, 15/32-32UNS, for Toggle and Foot Switches
Genuine Carling knurled nut commonly used on full size toggle switches and footswitches. This nickel plated knurled nut has a 15/32 threading and offers a clean look on builds using these switches.
package of 5
Please Log In to view prices