Switches

Switch - Toggle, DPST, On-Off, Chrome Tip
Toggle switch for Marshall amps, latching 2 position DPST, On-Off. 15A 250VAC rating. Used for Mains and Standby switch in Marshall 1959SLP, 1987X, 2245 and others. Mounting nuts (1 hex and 1 knurled) included. Main features:
  • Construction : Terminal and contact support are manufactured from a single piece of metal. The contacts are resistance-welded to the terminal for increased mechanical strength.
  • Rating : These switches are suitable for motor loads and power applications up to 15A 250VAC
  • UL, CSA and NF-VDE (EN 61058-1) approved

Note: On-Off switches may sometimes be referred to as On-None-Off.
Please Log In to view prices
Insulation - GC Electronics, fibroid, "fish paper"
Vulcanized Cellulose Fiber for all electrical insulation. Gray insulating paper. .010" thick. used in switches, under terminals, in transformers, etc .where mechanical strength is required. Its qualities of toughness, flexibility, and edge-tearing resistance combined with high dielectric strength and ready absorption of insulating varnish have led to its predominant use as an improved motor slot call insulation. Dielectric strength 3000 volts. 10" wide roll contains 240 sq. inches.
Please Log In to view prices
Nut - Switchcraft, Knurl Nut for Switches
Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated) Outside Diameter:5/8" Inside diameter threading:15/32" Width: 3/32"
Please Log In to view prices
Switch - Black Bat, Toggle, DPST, On-Off/Off-On, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This DPST switch is rated for 230VAC, 4.5A. When in the up position, the top switch is on and the bottom switch is off. When in the down position, the top switch is off and the bottom switch is on. Includes one hex nut and one knurled nut.
Please Log In to view prices
Switch - Carling, Mini Toggle, SPDT, 3-Position, PC Pins
Carling mini-toggle switch, single pole/double throw, PC Pins. ¼" mounting hole diameter. 0.354" bushing length. 3-Position, On-Off-On.
Please Log In to view prices
Footswitch - ST Professional, 4PST, Latching, Solder Lugs
Heavy duty 4PST latching switch made in Italy by ST Professional. The body is made of PBT that is riveted to the bushing plate for a sturdy construction. The actuation force is lighter than similar Carling switches and provides tactile and audible feedback so the switching action is apparent to the user. This version features standard solder lugs. This style of footswitch is similar to the vintage footswitches found in the Schaller Fuzz, some Tonebender models, and others.
Please Log In to view prices
Switch Tip - Fender®, Telecaster "Top Hat", Black
Original Fender® Tele "Top Hat" tip in black.
package of 2
Please Log In to view prices
Switch - Switchcraft, Pickup Selector Toggle, SPST, right angle
Switchcraft 3 Position Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® P-SW01. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. Features a slightly longer (3/8”) bushing ideal for thicker topped guitars.
  • Tip not included. See W-SC-W0X
  • Black finish
Please Log In to view prices
Switch - GØRVA, Submini Toggle, DPDT, 2 Position, PC Pins, Medium Bat
Premium two position DPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details
  • 5.59mm non-threaded bushing
  • 2-Position On/On
  • 4.95mm panel hole diameter
  • Double pole/Double throw (DPDT)
  • PC Pins

Features
  • Power Rating: DC9V, 1A
  • Contact Resistance: <20mΩ
  • Insulation Resistance: 1000MΩ Minimum
  • Dielectric Strength: 1000V RMS @ Sea Level
  • Operating Temperature: -40°C ~ +85°C
  • Electrical Life: 30,000 Cycles
  • RoHS & Lead-free
Please Log In to view prices
Switch - Carling, Mini Rocker, SPST, On-Off
Carling miniature rocker switch, SPST with .187" tabs (Peavey Style). Matte Finish. Black base/actuator. This switch is ideal for applications with back panel size constraints. It fits in a standard rectangular cutout and is designed to provide ease of insertion along with superior panel retention qualities. A high profile rocker and butt-action contacts provide the user with a crisp positive-type feel.
Please Log In to view prices
Relay - Panasonic, DPDT, 5V, Single Coil, Non-Latching
High quality non-latching relays from the Panasonic TQ series. These 5 volt relays are commonly used in pedals for true bypass switching. Relay switching can allow for a variety of options on pedal builds. Different footswitch modes can be obtained using the same momentary footswitch. Stereo switching using a standard footswitch is another possible option. Features:
  • Compact low profile size
  • Standard DIL spacing for easy PCB use and breadboard compatibility
  • Non-Latching
  • Single Coil
  • 5V Coil Voltage

For a latching version, please see P-RP-TQ2-L-5V.
Please Log In to view prices
Switch - Rotary, Voltage Selector, Modern, for Marshall
  • Ratings:
    • IEC: 6.3 A / 250 VAC; 50 Hz
    • UL: 10 A / 250 VAC; 60 Hz
    • CSA: 8 A / 250 VAC; 60 Hz
  • Mounting: Panel Mount from front side
  • Fastening: Screw-on mounting
  • Terminal: Solder
  • Number of Stages: 3
  • Type: SP3T
  • Lifetime: 300 operating cycles (without load)
  • Degree of Protection: IP 40
  • Allowable Operation Temp.: -40 °C to 85 °C
  • Climatic Category: 25/85/21 acc. to IEC 60068-1
  • Material of Socket: Thermoplastic, black, UL 94V-0
  • Weight: 16.5 g
  • Solderability: 350 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 2
  • Resistance to Soldering Heat: 350 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 2
  • Insulation Resistance: > 10,000MΩ (500VDC; 1min)
  • Contact Resistance: < 10 mΩ at 20 mV
  • Dielectric Strength:
    • > 2.5kVAC between L-N (1min; 50Hz)
    • > 4kVAC between L/N-PE (1min; 50Hz)
  • Clearance and Creepage Distance:
    • > 5mm
    • > 8mm between L/N-PE
  • Resistance to Vibration: acc. to IEC 60068-2-6, test Fc
Please Log In to view prices
Footswitch - ST Professional, DPST, Latching, Solder Lugs
Heavy duty DPST latching switch made in Italy by ST Professional. The body is made of PBT that is riveted to the bushing plate for a sturdy construction. The actuation force is lighter than similar Carling switches and provides tactile and audible feedback so the switching action is apparent to the user. This version features standard solder lugs. This style of footswitch is similar to the vintage footswitches found in the Gary Hurst Fuzz King, the Hornby Skewes Shatterbox, the Jen Fuzz III, the Selmer Buzz Tone, and others.
Please Log In to view prices
Switch - For Fender®, Rocker, DPST
Fender style DPST On-Off rocker switch. 1.07" x 1.18" mounting hole, .25" tabs, 20A, 125VAC. Replacement for discontinued 003-9236-000 switch.
Please Log In to view prices
Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs, Flattened
Carling mini-toggle switch, SPDT. This switch features a flattened actuator.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • Solder Lugs
Please Log In to view prices
Switch - Fender®, DPST, Power, for '94 Twin & Others
Original Fender®, Carling DPST On-Off standby/power for '94 Twin amp and other amp models - 3A, 250VAC; 6A, 125VAC.
Please Log In to view prices
Switch - Fender®, Toggle, SPST, Standby, Solder Lugs
Original Fender®, Carling SPST On-Off toggle switch for Fender tube amps - 3A, 250VAC; 6A, 125VAC, ½" mounting hole. Commonly used as the power switch.
Please Log In to view prices
Switch - Black Bat, Toggle, 4PST, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This 4PST switch is rated for 230VAC, 4.5A. Includes one hex nut and one knurled nut.
Please Log In to view prices
Switch - Toggle, DPDT, On-On, Screw Terminals
Heavy duty bat handle, DPDT. Rating: 20A 125V AC, 10A 277V AC Mounts in 1/2" hole, screw connections. On-On.
Note: On-On switches may sometimes be referred to as On-None-On.
Please Log In to view prices
Switch - Fender®, Toggle, SPST, Standby, Tabs
Original Fender®, Carling SPST On-Off standby for Fender tube amps - 3A, 250VAC; 6A, 125VAC.
Please Log In to view prices
Switch - Tactile, Pushbutton, 14mm Height, PCB Snap-in
PCB snap-in tactile switch with a 14mm height when mounted. This momentary Off-(On) SPST tactile switch has a standard 6.5mm x 4.5mm footprint.
Please Log In to view prices
Switch - Rotary Impedance Selector, for Hammond 1600A series
Includes: 3 pole, 3 position rotary switch (3P3T), 1/4" output jack and black chicken head knob. Hammond 1600A series transformers provide 'easy wire secondary' impedances of 4, 8, or 16 ohms. We now offer a selector switch, pre-wired and complete with 1/4" output jack. Follow simple instructions provided to wire transformer secondary to switch, mount switch and 1/4" jack in separate 3/8" diameter holes in chassis and you'll easily be able to select output impedance as necessary. (Not recommended for 1645A or 1650G)
(See P-H1600 for a selector switch to work with Hammond 1600 series transformers.)
Please Log In to view prices
Switch - Carling, Submini Toggle, DPDT, 2 Position, PC Pins
Carling submini toggle switch, DPDT, 2 position, .195" mounting hole diameter, 0.236" bushing length.
Please Log In to view prices
Switch - Peavey, Rocker, SPST, On-Off
Peavey SPST rocker switch, On-Off, with molded dot to indicate 'on' position, can be used in Classic VTX. 5A 125VAC, 2A 250VAC
Please Log In to view prices