Switches

Switch Tip - Fender®, Stratocaster
Colors Available:
Original Fender set of two pickup switch tips for use on most U.S. and Mexico-made Stratocaster® models.
package of 2
Please Log In to view prices
Switch - Carling, Submini Toggle, DPDT, 2 Position, PC Pins
Carling submini toggle switch, DPDT, 2 position, .195" mounting hole diameter, 0.236" bushing length.
Please Log In to view prices
Switch - Black Bat, Toggle, DPST, On-Off/On-Off, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This On-Off SPST switch is rated for 230VAC, 4.5A. When in the up position, both switches are on. When in the down position, both switches are off. Includes one hex nut and one knurled nut.
Please Log In to view prices
Switch - Carling, Mini Toggle, DPDT, 3 Position
Genuine Carling DPDT 3 Position Mini Toggle, Round Bat, Solder Lugs
  • DPDT ( Double Pole/ Double Throw) switch
  • 0.354" bushing length
  • 0.409” bat length
  • ¼" chassis hole diameter
  • Solder terminals
Please Log In to view prices
Switch - Switchcraft®, Slide, DPDT, Jazzmaster / Jaguar
Genuine Switchcraft® DPDT 2-position On-On slide switch for use on Jazzmaster and Jaguar style guitars. Also used for bright switches in Fender black and silverface amplifiers. Upgrade cheap or malfunctioning switches with these high quality replacements.
  • Recommended .75 control cavity depth
  • 1.125” center-to-center mounting hole spacing
  • Latching
  • Screws not included
  • See S-HS440-12 for compatible screws
Please Log In to view prices
Footswitch - 4PDT, Black, Solder Lugs
Quad Pole, Double Throw (4PDT), latching footswitch with 12 solder lugs.
Please Log In to view prices
Footswitch - SPST, Momentary, Solder Lugs, Soft Switch, Black
SPST(single pole,single throw) normally open, Off-(On) momentary foot switch with solder lugs and soft switching. These high quality switches feature a black actuator, bushing and mounting hardware. Depressing the switch shorts the lugs together and when the switch is released it returns to its non connected state with no click.
  • SPST momentary switch
  • Black finish and hardware
  • Soft, silent switching with no click
  • Normally open operation
  • Solder lugs
  • Nuts and washer included
  • Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
Please Log In to view prices
Footswitch - DPDT, Momentary, Solder Lugs
DPDT momentary footswitch. AC125V/4A AC250V/2A. Rated for 50,000 make-and-break cycles at full load.
Please Log In to view prices
Switch - Carling, Mini Toggle, DPDT, 3-Position, PC Pins
Carling mini-toggle switch, double pole/double throw, PC Pins. ¼" mounting hole diameter. 0.354" bushing length. 3-Position.
Please Log In to view prices
Switch - Black Bat, Toggle, DPST, On-Off/Off-On, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This DPST switch is rated for 230VAC, 4.5A. When in the up position, the top switch is on and the bottom switch is off. When in the down position, the top switch is off and the bottom switch is on. Includes one hex nut and one knurled nut.
Please Log In to view prices
Switch - Carling, Mini Toggle, SPDT, 2 Position, PC Pins, Short Bat
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • PC mount pins
Please Log In to view prices
Footswitch - DPDT, PC Mount, latching
Latching DPDT footswitch, PC mount. Made in Taiwan.
Please Log In to view prices
Switch - Carling, Mini Toggle, DPDT, 2-Position, PC Pins
0.354" bushing length. 2-Position On/On. ¼" mounting hole diameter. Double pole/Double throw (DPDT). PC mount pins.
Please Log In to view prices
Switch - Carling, Toggle, SPST, On-Off, Solder Lugs
Carling, SPST 2 position toggle switch, On-Off. 10A 250VAC, 15A 125VAC. Made in Mexico. Note: On-Off switches may sometimes be referred to as On-None-Off.
Please Log In to view prices
Switch - Pickup Selector, Telecaster, 3-Way
Tele style 3 position pickup selector switch. M3.5 x 0.80 mounting hole threading. Switch tip not included.
Please Log In to view prices
Footswitch - DPDT, Solder Lugs
Great replacement for stomp-box effects requiring a latching DPDT (Double Pole, Double Throw) switch. AC125V/4A AC250V/2A.
Please Log In to view prices
Footswitch - DPDT, Momentary, PC Terminals
DPDT momentary footswitch with PC terminals. Black with 6 terminals. AC125V 4A, AC250V 2A. PC mount version of P-H503.
Please Log In to view prices
Footswitch - 3PDT, black body, Solder Lugs, Low Profile
Low profile switches with a smaller footprint than the standard 3PDT sizes. These footswitches are perfect for cramped layouts but are also great for general use. The small solder lugs are great for wiring by hand that also work well with PCB layouts. Mounting hardware included. Features
  • Latching Footswitch
  • 3PDT
  • Low Profile
  • Small Solder Lugs
  • Hardware Included
Please Log In to view prices
Locking Washer - Carling, for switches
Flat washer/locking ring. Fits switches that mount to 1/2" chassis holes. A 0.110" length guide tab ensures a locking fit (locking hole is 0.376" from chassis hole center).
package of 5
Please Log In to view prices
Switch - Korg, Momentary Tactile Switch, Under Knob P8012S
Korg Tact switch under knob P8012S. SPST momentary, 0.25in. width.
Please Log In to view prices
Knurled Nut - Carling, 15/32-32UNS, for Toggle and Foot Switches
Genuine Carling knurled nut commonly used on full size toggle switches and footswitches. This nickel plated knurled nut has a 15/32 threading and offers a clean look on builds using these switches.
package of 5
Please Log In to view prices
Relay - Panasonic, DPDT, 5V, Single Coil, Latching
High quality latching relays from the Panasonic TQ series. These 5 volt relays are commonly used in pedals for true bypass switching. Relay switching can allow for a variety of options on pedal builds. Different footswitch modes can be obtained using the same momentary footswitch. Stereo switching using a standard footswitch is another possible option.
Features:
  • Compact low profile size
  • Standard DIL spacing for easy PCB use and breadboard compatibility
  • Latching
  • Single Coil
  • 5V Coil Voltage

For a non-latching version, please see P-RP-TQ2-5V.
Please Log In to view prices
Washer - Flat, M12, Stainless Steel, Thick
Extra thick M12 flat washers. These washers fit both metric (M12) and imperial (15/32) bushings for compatibility with the vast majority of foot switches and full-sized toggle switches. These thick steel washers are a great way to add a classy look to projects.
package of 10
Please Log In to view prices
Switch - For Fender®, Rocker, DPST
Fender style DPST On-Off rocker switch. 1.07" x 1.18" mounting hole, .25" tabs, 20A, 125VAC. Replacement for discontinued 003-9236-000 switch.
Please Log In to view prices