Switches

Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.

• 0.354" bushing length
• 3-Position
• ¼" mounting hole diameter
• Double pole/Double throw (DPDT)
• Solder lugs

High quality vactrols from Xvive. The Xvive vactrols are clones of the original Excelitas / Perkins-Elmer vactrols used in many effects pedals, synthesizers, compressors and other equipment. These vactrols feature a thick epoxy sealed casing. The VTL5C3 and VTL5C3/2 both have a steep slope, good dynamic range, a very low temperature coefficient of resistance, and a small light history memory.

Carling mini-toggle switch, SPDT, PC Pins. 2-Position.

• 0.354" bushing length
• 2-Position On/On
• ¼" mounting hole diameter
• Single pole/Double throw (SPDT)
• PC mount pins

Carling, DPDT 2 position toggle with solder lugs (6A, 125V). 0.687" toggle length. On-On.
Note: On-On switches may sometimes be referred to as On-None-On.

Good stomp-box effects switch (Triple Pole, Double Throw). 3PDT Latching type footswitch. Made in Taiwan.

Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.

Switchcraft 3 position Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® PSTS-010. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. This version of the L-Type switch is used in the common two pickup wiring for a neck position, middle position with neck and bridge, and a bridge position.

Piher PT-15 15mm carbon trimmer potentiometers. These trimmers are used in a variety of amps and equipment and most notably in Marshall amplifiers. Features:

• Carbon resistive element
• Dust proof enclosure
• Polyester substrate

Oak® single wafer 5 way lever switch.Standard U.S. size. Fits 1/16" x 1-1/16" slot. 1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.

3PDT latching footswitch with PC terminals. Blue with 9 terminals. Made in Taiwan.

Carling, 2 position DPDT toggle switch with screw terminals. On-On. Note: On-On switches may sometimes be referred to as On-None-On.

Carling, DPST toggle, 2-position, On-Off with solder lugs (3A, 125V), .500"" toggle length, 0.465" bushing length.
Note: On-Off switches may sometimes be referred to as On-None-Off.

Genuine Carling 2 Position Mini Toggle, On-On, Short Round Bat, Right Angle, PC Mount Features:

• SPDT ( Single Pole/ Double Throw) On-On switch
• 0.275" bushing length
• 0.270” bat length
• ¼" chassis hole diameter
• Right angle, PC Mount terminals

Note: On-On switches may sometimes be referred to as On-None-On.

Nickel-plated internal tooth lock washers from Carling. These fit 15/32 and M12 bushing which are commonly used on full sized toggle switches and footswitches.

Carling SPDT latching footswitch used in footswitch boxes and effects pedals (112-P). This style of On-On footswitch can be found in many vintage stomp boxes and channel/effect footswitches. The two identical lugs are the two throws and the lug with a unique shape is the common pole.

Good latching stomp-box effects switch (Double Pole, Double Throw), On-On. Solder Lugs. 1A 250V, 3A 125V Note: On-On switches may sometimes be referred to as On-None-On.

Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On

SPST On-Off toggle switch. Made in Taiwan (M10 x.1.0 threading) .39" bushing diameter.

Carling, SPDT mini toggle with short actuator, 3 positions, ¼" mounting hole diameter, 0.354" bushing length.

• 0.354" bushing length
• 3-Position On/Off/On
• ¼" mounting hole diameter
• Single pole/Double throw (SPDT)
• Solder lugs

Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality, 3 position switch with knob and mounting hardware.

Lighted DPST On-Off power switch. Used in Marshall JCM series and others. 15/16" x 1-1/16" x 1" deep.

Rotary impedance selector. Modern, selects between 4Ω, 8Ω, and 16Ω. Panel mount from front side. SP3T.

Original Fender set of two pickup switch tips for use on most U.S. and Mexico-made Stratocaster® models.

Premium two position SPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details

• 5.59mm non-threaded bushing
• 2-Position On/On
• 4.95mm panel hole diameter
• Single pole/Double throw (SPDT)
• PC Pins

Features

• Power Rating: DC9V, 1A
• Contact Resistance: <20mΩ
• Insulation Resistance: 1000MΩ Minimum
• Dielectric Strength: 1000V RMS @ Sea Level
• Operating Temperature: -40°C ~ +85°C
• Electrical Life: 30,000 Cycles
• RoHS & Lead-free