Speakers & Components

Speakers. The last opportunity to modify your tone. Unlike hi-fi speakers which attempt to create sounds that are true to the musical source fed them, guitar speakers impart their own tone. Your amp/cabinet pretty much determines three things about what speaker to select; speaker size, impedance and power rating. (See our tech corner article on Speaker Impedance, Power Handling and Wiring). But the tone is up to you! Speaker replacement is probably the easiest mod you can perform.

Jensen

Jensen Loudspeakers have a long history. Founded in 1927 by Peter Jensen, one of the co-inventors of the loudspeaker, Jensen began producing commercial amplifier loudspeakers in the 1940s.
Gaskets - Eminence, Replacement Set
Set of four genuine Eminence® replacement gaskets for one 12" speaker. ¼" thick, durable foam with paper backing for mounting with glue.
package of 4
Please Log In to view prices
Gaskets - Jensen®, for speaker cabinets
Set of speaker gaskets for spacing/protection of your Jensen speaker. These will work in any cabinet, and are especially popular in Leslie cabinets. Four gaskets is enough for one speaker.
package of 4
Please Log In to view prices
Bell Cover - Jensen®, for Alnico R and Q Type Speakers
For use on the Jensen P-A-P8R, P-A-P10R, P-A-P10R-FEN, P-A-P12R, P-A10Q and P-A-P12Q. Jensen bell covers are a throwback to the style of classic Jensen speakers from the 1950s and '60s that can complete the look of a vintage or vintage-inspired amplifier.
Please Log In to view prices
Speaker - Jensen® MOD®, 6", MOD6-15, 15W
The Mod 6-15 is a 6" ferrite speaker with 15 watts of power. It is a good upgrade for small practice amps.
Please Log In to view prices
Bell Cover - Jensen Blackbird Speakers
Bell cover for 12" 100W Blackbird speakers. Jensen bell covers are a throwback to the style of classic Jensen speakers from the 1950s and '60s that can complete the look of a vintage or vintage-inspired amplifier.
Please Log In to view prices
Bell Cover - Jensen®, for Alnico N Type Speakers
For use on Jensen P-A-P15N and P-A-P12N-NB to complete the vintage look of the originals. Jensen bell covers are a throwback to the style of classic Jensen speakers from the 1950s and '60s that can complete the look of a vintage or vintage-inspired amplifier.
Please Log In to view prices
Speaker - Jensen® MOD®, 5", MOD5-30, 30W, 8Ω
The Mod 5-30 is a 5" ferrite speaker with 30 watts of power. It is a great replacement for Trace Elliot amps.
Please Log In to view prices
Speaker - Jensen® Vintage Ceramic, 6", C6V, 20W
The smallest ceramic guitar speaker in the Jensen range, the C6V has a smooth tone with rich midrange, excellent detail on the top end, and a convincing bass range for its size. The 20W power handling ensures good headroom, dynamics and articulation, even with mid and high gain tones.
Please Log In to view prices
Speaker - Jensen® MOD®, 8", MOD8-20, 20W
The Mod 8-20 is a 8" ferrite speaker with 20 watts of power. Straightforward tone with smooth highs and more predominant lows. It responds to overdrive distortion with a mellow fuzz overdrive.
Please Log In to view prices
Speaker - Jensen® Vintage Ceramic, 8", C8R, 25W
The C8R is the little gem in the Jensen Vintage series. It delivers a solid compact tone that defies its size. Extremely versatile, it finds application in small home and student amplifiers; but with a microphone in front, it is capable of transferring on tape some of the biggest tones ever. Not by chance, the vintage Fender® Champ® amplifiers produced with the C8R speaker are treasured by many players as a great studio tool.
Please Log In to view prices
Speaker - Jensen® MOD®, 10", MOD10-35, 35W
The Mod 10-35 is a 10" ferrite speaker with 35 watts of power. Warm, straightforward tone and tight bass frequencies. When presented with overdrive distortion, it takes on a gritty edge.
Please Log In to view prices
Speaker - Jensen® Jets, 8", Falcon, 30W, Ferrite, 8Ω
The Falcon 8" speaker produces the same warm and expressive sound and its 10” and 12” counterparts. It offers a smooth and dynamic response that is ideal for both clean and pushed tones. The top end is carefully tailored to provide a balanced and nuanced sound, while the strong low-mid and bass response deliver a powerful and immediate tone. Whether you’re playing blues, rock, or metal, the Falcon 8 / 30 is sure to impress. Guitarist Description: Rich and well-balanced bass with a tight and precise midrange. The treble notes are bright and clear, with a sweet and smooth response.
  • Lows: Balanced
  • Mids: Vocal
  • Highs: Smooth
  • Overdrive: Fat
Please Log In to view prices
Speaker - Jensen® Vintage Ceramic, 10", C10R, 25W, 8Ω
Developed as the ceramic version of the P10R, for low-powered studio amps, the C10R is revered for having been the speaker of the Blackface Princeton®, the Princeton Reverb® and many others. The combination of the warm sounding circuit of the Princeton and the bright, colorful tone of the C10R delivers magical tones in any recording session.
Please Log In to view prices
Speaker - Jensen® MOD®, 10", MOD10-50, 50W
The Mod 10-50 is a 10" ferrite speaker with 50 watts of power. Warm, straightforward tone and tight bass frequencies. When presented with overdrive distortion, it exhibits a colorful fuzz edge.
Please Log In to view prices
Speaker - Jensen® MOD®, 12", MOD12-35, 35W
The Mod 12-35 is a 12" ferrite speaker with 35 watts of power. Straightforward tone with low end focus. When presented with overdrive distortion, it has a straightforward fuzz voice.
Please Log In to view prices
Speaker - Jensen® Vintage Ceramic, 12", C12R, 25W, 8Ω
Typically used in the lower powered 12” amps for studio or practice, the C12R is a clear sounding, sparkling speaker, very sensitive to the character of amplifier. When paired with a stout, rich and warm electronic design it can do wonders. Ampeg® Jets and Reverberockets are just some of the most revered amps that carried C12R as their factory choice.
Please Log In to view prices
Speaker - Jensen® Jets, 10", Falcon, 40W, Ferrite
A very successful and versatile 10”, the Falcon 10 adds a new dimension of openness to the classic, fat and warm tone of its 12” version. The seamed cone membrane delivers an unexpected bass response for its 10” size and it is balanced perfectly with its sweet, yet cutting and present high end.
Please Log In to view prices
Speaker - Jensen® Vintage Ceramic, 10", C10Q, 35W
Adopted primarily in the Vibrolux® and Vibroverb® amps of the Brownface and Blackface era, the C10Q is a very easy to drive speaker that breaks up nicely with straightforward biting character. It was also very common in many Silvertone® and Valco® amps. It loves the 2x10 configuration and the floating baffles.
Please Log In to view prices
Speaker - Jensen® MOD®, 10", MOD10-70, 70W, 8Ω
The Mod 10-70 is a 10" ferrite speaker with 70 watts of power. Thick, straightforward tone and fat bass frequencies. It exhibits a bass heavy, dirty grit when presented with overdrive distortion.
Please Log In to view prices
Speaker - Jensen® MOD®, 12", MOD12-50, 50W
The Mod 12-50 is a 12" ferrite speaker with 50 watts of power. Warm, well balanced tone with low end focus. It responds to overdrive distortion with a rich smooth crunch and bright lead-voice fuzz.
Please Log In to view prices
Speaker - Jensen® Vintage Ceramic, 12", C12Q, 35W
Following the heritage of the P12Q, the C12Q is one of the most versatile speakers in the Vintage range. Powerful enough for a cranked Deluxe-style amp yet balanced and warm, it surely is not lacking in bite. It has been used in both single and twin configurations by countless manufacturers including Fender®, Ampeg®, Silvertone® and Supro®, just to name a few.
Please Log In to view prices
Speaker - Jensen® Vintage Alnico, 6", P6V, 20W
The P6V offers a tonal alternative to the C6V. Balanced and powerful for its size, its AlNiCo magnet assembly grants an extra-chimey character to the tone. This makes it a great choice for those applications where clean, detailed sounds on the edge of clipping are the key target for the player.
Please Log In to view prices
Speaker - Jensen® MOD®, 12", MOD12-70, 70W
The Mod 12-70 is a 12" ferrite speaker with 70 watts of power. The MOD12-70 is loud, dynamic, and well defined. It has a defined warm crunch response to overdrive distortion.
Please Log In to view prices
Speaker - Jensen® Jets, 10", Silverbird, 50W, Ferrite, 8Ω
The Silverbird 10” speaker is a well-balanced speaker that takes inspiration from the Blackbird 10 / 40 “Reinforced AlNiCo” tonal imprint. It retains the immediacy of the best 10" AlNiCo speakers, while also providing a powerful bass range that is tight enough for higher gain applications. The speaker is highly versatile and can fit nicely in a wide range of musical genres with its open and detailed vintage-inspired tone. Guitarist Description: Powerful bass range, tight enough for the higher gain applications, yet warm and full.
  • Lows: Warm
  • Mids: Detailed
  • Highs: Open
  • Overdrive: Crunchy
Please Log In to view prices