You are here

Speakers & Components

Speakers. The last opportunity to modify your tone. Unlike hi-fi speakers which attempt to create sounds that are true to the musical source fed them, guitar speakers impart their own tone.

Your amp/cabinet pretty much determines three things about what speaker to select; speaker size, impedance and power rating. (See our tech corner article on Speaker Impedance, Power Handling and Wiring). But the tone is up to you! Speaker replacement is probably the easiest mod you can perform.

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(47 pages)
P-A-T5806Speaker - Celestion, 18", CF18VJD, 1600 watts

Special Order Item

Speaker, Celestion, CF18VJD, 18 in., 8 ohm Features:



  • 18" ferrite magnet, cast aluminium chassis LF driver delivering 1600Wrms (AES Standard) power handling and 97dB sensitivity
  • 5" high temperature, dual layer, Inside/Outside voice coil for higher efficiency, preventing sensitivity loss through thermal compression
  • FEA optimized magnet assembly and suspension deliver highly symmetrical cone movement, leading to exceptionally low harmonic distortion
  • Vented front plate increases airflow to provide enhanced cooling
  • Twin demodulation rings reduce flux modulation, minimizing electromagnetic distortion
  • Double suspension and "multi-roll" surround provide exceptional linearity at extremes of cone excursion

Please Log In to
view prices
Click to read more
P-A-T5763Speaker - Celestion, 21", NTR21-5010JD, 1600W, 8Ω

Special Order Item

Speaker, Celestion, NTR21-5010JD, 21", 8Ω.


Please Log In to
view prices
Click to read more
P-A-T5683Speaker - Celestion, 2", CDX20-3000, 75 watts, 8 ohm

Special Order Item

Speaker, Celestion, CDX20-3000, 2 in., 8 ohm Features:



  • 2" exit, neodymium magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 107dB sensitivity
  • Patented phase plug design method suppresses cavity resonances at higher frequencies
  • Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
  • Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
  • Rolled polyimide surround improves stiffness control, further lowering distortion
  • Curved coherent wavefront, optimised for horn loading

Please Log In to
view prices
Click to read more
P-A-T5757Speaker - Celestion, 2", CDX20-3000, 75 watts, 16 ohm

Special Order Item

Speaker, Celestion, CDX20-3000, 2 in., 16 ohm Features:



  • 2" exit, neodymium magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 107dB sensitivity
  • Patented phase plug design method suppresses cavity resonances at higher frequencies
  • Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
  • Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
  • Rolled polyimide surround improves stiffness control, further lowering distortion
  • Curved coherent wavefront, optimised for horn loading

Please Log In to
view prices
Click to read more
P-A-T5491Speaker - Celestion, 12", NTR12-3018D, 350W, 8Ω

Special Order Item

Speaker, Celestion, NTR12-3018D, 12", 8 ohm.


Please Log In to
view prices
Click to read more
P-A-T5640Speaker - Celestion, 1.4". CDX14-3050, 75 watts

Special Order Item

Speaker, Celestion, CDX14-3050, 1.4 in., 8 ohm Features:



  • 1.4" exit, neodymium magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 106.5dB sensitivity
  • Patented phase plug design method suppresses cavity resonances at higher frequencies
  • Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
  • Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
  • Rolled polyimide surround improves stiffness control, further lowering distortion
  • Curved coherent wavefront, optimised for horn loading

Please Log In to
view prices
Click to read more
P-A-T5668Speaker - Celestion, 8", NTR08-2009D, 200W, 8Ω

Special Order Item

Speaker, Celestion, NTR08-2009D, 8 in., 8Ω.


Please Log In to
view prices
Click to read more
P-A-BS15N350A-8Speaker - Jensen Smooth Bass, 15", BS15N350A, 350W, 8Ω

The Smooth BS 15N/350A is a 15" neodymium speaker with 350 watts of power. Smooth Sound speakers are extremely clean and round with superb headroom. Equipped with neodymium magnets and aluminium baskets, they offer great linear excursion and dynamics. They are ideal for modern styles where extended low end is required. Neodymium magnets offer a 50% reduction in weight guaranteeing very light systems. The proprietary aluminium basket was specially designed to avoid sound wave reflections on the rear side of the cone, thereby allowing for faster and better cooling of both the voice coil and the air moved by it. The 15'' bass speaker provides a full and warm low-end that will fill the room.


Please Log In to
view prices
Click to read more
P-A-G12-CREAM-XSpeaker - Celestion, 12", Cream, 90W

With a 90-watt power rating, the Celestion Cream is purpose-built for vintage tones, whatever kind of amp you use. By applying new technologies and manufacturing methods developed during the creation of our Creamback speakers, we've been able to deliver a higher power rating while preserving the very essence of an alnico guitar speaker.



Delivering a glorious, laid-back attack, the Cream exudes warm lows and a brilliant bell-like chime. It has smooth and organic mids, further characterised by a fine-grained detail that adds a high-definition quality to the vocal range.



The Cream has been specially created to bring alnico class to all kinds of amps from 1-watt to 90-watts. It conveys a satisfying warmth, detailed expressiveness and exceptional musicality, even at low power levels.




Please Log In to
view prices
Click to read more
P-A-T5863Speaker - Celestion, 18", CF1840JD, 1000 watts

Special Order Item

Speaker, Celestion, CF1840JD, 18 in., 8 ohm Features:



  • 18" ferrite magnet, cast aluminium chassis LF driver delivering 1000Wrms (AES Standard) power handling and 98dB sensitivity
  • 4" high temperature, dual layer, Inside/Outside voice coil for higher efficiency, preventing sensitivity loss through thermal compression
  • FEA optimized magnet assembly and suspension deliver highly symmetrical cone movement, leading to exceptionally low harmonic distortion
  • Vented magnet assembly increases airflow to provide enhanced cooling
  • Twin demodulation rings reduce flux modulation, minimizing electromagnetic distortion
  • Double suspension and "multi-roll" surround provide exceptional linearity at extremes of cone excursion

Please Log In to
view prices
Click to read more

Pages

(47 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Speakers & Components