Speakers & Components

Speakers. The last opportunity to modify your tone. Unlike hi-fi speakers which attempt to create sounds that are true to the musical source fed them, guitar speakers impart their own tone. Your amp/cabinet pretty much determines three things about what speaker to select; speaker size, impedance and power rating. (See our tech corner article on Speaker Impedance, Power Handling and Wiring). But the tone is up to you! Speaker replacement is probably the easiest mod you can perform.

Celestion

Founded in 1924, Celestion has grown to become one of the world's largest manufacturers of loudspeakers.
Recone Kit - Celestion, for G12M and G12H Heritage
Special Order Item
Original Celestion Guitar Speaker Recone Kit. For 12" Celestion G12M Heritage and G12H Heritage editions
Please Log In to view prices
Speaker - Celestion, 1", CDX1-1745, 40W
Special Order Item
Ferrite magnet compression driver
  • 1" exit, ferrite magnet compression driver with 1.75" edgewound copper clad aluminium voice coil
  • 40Wrms power handling (AES standard) and 110dB sensitivity
  • Sound CastleTM clamping ensures even pressure on diaphragm assembly for reduced distortion
  • One piece PETP diaphragm and surround
  • Finite Element Analysis (FEA) used to optimise both magnet assembly and acoustic design
Please Log In to view prices
Diaphragm - Celestion, Aluminum for CDX1-14
Special Order Item
Celestion diaphragm for CDX1-14 compression drivers
Please Log In to view prices
Diaphragm - Celestion, PETP for CDX1-17
Special Order Item
Celestion PETP diaphragm for CDX1-17 compression drivers
Please Log In to view prices
Diaphragm - Celestion, Titanium for CDX14 and CDX20
Special Order Item
Celestion diaphragm for CDX14 and CDX20 compression drivers
Please Log In to view prices
Speaker - Celestion, 2", CDX20-3000, 75W
Special Order Item
Speaker, Celestion, CDX20-3000, 2 in. Features:
  • 2" exit, neodymium magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 107dB sensitivity
  • Patented phase plug design method suppresses cavity resonances at higher frequencies
  • Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
  • Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
  • Rolled polyimide surround improves stiffness control, further lowering distortion
  • Curved coherent wavefront, optimised for horn loading
Please Log In to view prices
Speaker - Celestion, 12", FTR12-3070C, 350W, 8Ω
Special Order Item
Ferrite magnet cast aluminium chassis driver
Please Log In to view prices
Recone Kit - Celestion, G12-65 / Classic Lead 80, 8 Ohm
Special Order Item
Original Celestion Guitar Speaker Recone Kit. For 12" Celestion 8 ohm G1280 (our SKU P-A-G1280-8) and 8 ohm G12-65-8 (our SKU P-A-G12-65-8).
Please Log In to view prices
Horn - Celestion, H1-9040P, 90˚ x 40˚ Radiation Pattern
Special Order Item
Compatible for use with bolt (flange) fitted compression drivers
Please Log In to view prices
Speaker - Celestion, 12", K12H-200TC, 200W, 8Ω
Special Order Item
Ferrite magnet pressed steel chassis driver.
Please Log In to view prices
Adapter - Celestion, Plastic, CDX1, Screw
Special Order Item
CDX1 screw adapter adapts bolt-on to screw-on. Plastic.
Please Log In to view prices
Horn - Celestion, H1-7050 no bell, 70˚ x 50˚ Radiation pattern
Special Order Item
The H1-7050 'NoBell' horn flare contains embedded elastomer side panels to make it acoustically inert.
Please Log In to view prices
Speaker - Celestion, 1", CDX1-1415, 20W, 8Ω
Special Order Item
Neodymium magnet compression driver
Please Log In to view prices
Speaker - Celestion, 1", CDX1-1425, 25W, 8Ω
Special Order Item
Neodymium magnet compression driver
Please Log In to view prices
Speaker - Celestion, 1", CDX1-1430, 50W, 8Ω
Special Order Item
Neodymium magnet compression driver
Please Log In to view prices
Speaker - Celestion, 15", FTR15-3070C, 400W, 8Ω
Special Order Item
Speaker, Celestion, FTR15-3070C, 15 in., 8 ohm Features:
  • 15" ferrite woofer provides 400Wrms power handling (AES Standard) and 99dB sensitivity
  • 3" high temperature Inside/Outside voice coil efficiently dissipates heat, preventing sensitivity loss through thermal compression
  • Flexirol TM surround for greater excursion control
  • Saturated gap technology for lower harmonic distortion
  • Low frequency response, down to 40Hz
  • Smart chassis design minimises acoustic distortion
Please Log In to view prices
Speaker - Celestion, 12", K12H-100TC, 100W, 8Ω
Special Order Item
Ferrite magnet pressed steel chassis driver.
Please Log In to view prices
Speaker - Celestion, 15", FTR15-4080F, 600W, 8Ω
Special Order Item
Speaker, Celestion, FTR15-4080F, 15 in., 8 ohm Features:
  • 15" ferrite woofer provides 600Wrms power handling (AES Standard) and 97dB sensitivity
  • 4" high temperature Inside/Outside voice coil efficiently dissipates heat, preventing sensitivity loss through thermal compression
  • Flexirol TM surround for greater excursion control
  • Low frequency response, down to 35Hz
  • Smart chassis design minimises acoustic distortion
  • Specially treated weather-resistant cone
Please Log In to view prices
Speaker - Celestion, 18", FTR18-4080FD, 1000W, 8Ω
Special Order Item
Ferrite magnet cast aluminium chassis driver
Please Log In to view prices
Speaker - Celestion, 1", CDX1-1730, 40W, 8Ω, flange
Special Order Item
Neodymium magnet compression driver, flange version
  • 1" exit, neodymium magnet compression driver with 1.75" edgewound copper clad aluminium voice coil
  • 40Wrms (AES standard) power handling and 110dB sensitivity
  • Designed with Sound CastleTM clamping to ensure uniform pressure on diaphragm assembly for reduced acoustic distortion
  • One piece PETP film diaphragm and surround
  • Advanced Finite Element Analysis (FEA) tools used to create a very light weight, high powered compression driver
Please Log In to view prices
Speaker - Celestion, 1", CDX1-1731, 40W, 8Ω, screw
Special Order Item
Neodymium magnet compression driver, screw version
  • 1" exit, neodymium magnet compression driver with 1.75" edgewound copper clad aluminium voice coil
  • 40Wrms (AES standard) power handling and 110dB sensitivity
  • Designed with Sound CastleTM clamping to ensure uniform pressure on diaphragm assembly for reduced acoustic distortion
  • One piece PETP film diaphragm and surround
  • Advanced Finite Element Analysis (FEA) tools used to create a very light weight, high powered compression driver
Please Log In to view prices
Speaker - Celestion, 1", CDX1-1746, 40W, 8Ω
Special Order Item
Ferrite magnet compression driver
Please Log In to view prices
Speaker - Celestion, 15", FTR15-3070E, 400W, 8Ω
Special Order Item
Ferrite magnet cast aluminium chassis driver
Please Log In to view prices
Recone Kit - Celestion, for FTR18-4080HDX, 8Ω
Special Order Item
Celestion Speaker Repair Kit for FTR18-4080HDX, P-A-T5602
Please Log In to view prices