Speakers & Components
Speakers. The last opportunity to modify your tone. Unlike hi-fi speakers which attempt to create sounds that are true to the musical source fed them, guitar speakers impart their own tone. Your amp/cabinet pretty much determines three things about what speaker to select; speaker size, impedance and power rating. (See our tech corner article on Speaker Impedance, Power Handling and Wiring). But the tone is up to you! Speaker replacement is probably the easiest mod you can perform.
JensenJensen Loudspeakers have a long history. Founded in 1927 by Peter Jensen, one of the co-inventors of the loudspeaker, Jensen began producing commercial amplifier loudspeakers in the 1940s.
Speaker - Jensen® Vintage Ceramic, 8", C8R, 25W
The C8R is the little gem in the Jensen Vintage series. It delivers a solid compact tone that defies its size. Extremely versatile, it finds application in small home and student amplifiers; but with a microphone in front, it is capable of transferring on tape some of the biggest tones ever. Not by chance, the vintage Fender® Champ® amplifiers produced with the C8R speaker are treasured by many players as a great studio tool.
Speaker - Jensen® Vintage Ceramic, 12", C12N, 50W
The C12N is one of the most important speakers in Jensen’s history. It is the top 12” speaker of the ‘Blackface Era, used by many American manufacturers in the mid ‘60s for their upper range models when the price of AlNiCo became unsustainable for the manufacturers. Clear highs, solid mids, and powerful basses, it epitomizes the tone of that decade, from the surf, the rock n’ roll, the electric blues and the West Coast inspired music. It was used in Twin, Bassmanä and Bandmasterä style amps, and many others.
Speaker - Jensen® Vintage Ceramic, 10", C10Q, 35W
Adopted primarily in the Vibrolux® and Vibroverb® amps of the Brownface and Blackface era, the C10Q is a very easy to drive speaker that breaks up nicely with straightforward biting character. It was also very common in many Silvertone® and Valco® amps. It loves the 2x10 configuration and the floating baffles.
Speaker - Jensen® Vintage Ceramic, 10", C10R, 25W, 8Ω
Developed as the ceramic version of the P10R, for low-powered studio amps, the C10R is revered for having been the speaker of the Blackface Princeton®, the Princeton Reverb® and many others. The combination of the warm sounding circuit of the Princeton and the bright, colorful tone of the C10R delivers magical tones in any recording session.
Speaker - Jensen® Vintage Alnico, 8", P8R, 25W
One of the archetypical speakers in the range, the P8R has been installed in thousands of Champ and Princeton style amps for decades. Slightly clearer sounding than the C8R, its ceramic cousin, the P8R shines in clean and slightly crunch applications, where the typical chime of the AlNiCo magnets helps the sparkling harmonics to bloom.
Speaker - Jensen® Vintage Alnico, 10", P10R, 25W
The P10R is very important in the history of Jensen speakers. Its shimmering, yet throaty and vibrant tone is one of the signatures of the Tweed era and inspired the start-up of the British tones. It was the first speaker reissued by Jensen, presented to a restricted panel of partners at the 1999 Summer NAMM show. The P10R is the speaker that contributed to the magical tone of the 4x10 Bassman® Tweed amps, the 4x10 Super Tweed Amps and the equally mythical 3x10 Bandmaster® amps.
Speaker - Jensen® MOD®, 10", MOD10-50, 50W
The Mod 10-50 is a 10" ferrite speaker with 50 watts of power. Warm, straightforward tone and tight bass frequencies. When presented with overdrive distortion, it exhibits a colorful fuzz edge.
Speaker - Jensen® Vintage Alnico, 12", P12Q, 40W
The P12Q is a lower power sibling to the P12N, with a smaller voice coil and a vintage steel basket, nicknamed the “hot dog” or “sausage” because of the shape of the openings in its basket frame. Warm and balanced sounding, with a nice bite in the upper midrange, it is a very interesting allrounder, for many different applications from the traditional country and jazz tones to the more aggressive rock and roll and blues application. Typically it was found in ‘holy grail’ amps such as the vintage Tweed Deluxe and other similar models as well as the Ampeg® Jet, Gibson® GA-20 and many more.
Speaker - Jensen® Vintage Ceramic, 12", C12Q, 35W
Following the heritage of the P12Q, the C12Q is one of the most versatile speakers in the Vintage range. Powerful enough for a cranked Deluxe-style amp yet balanced and warm, it surely is not lacking in bite. It has been used in both single and twin configurations by countless manufacturers including Fender®, Ampeg®, Silvertone® and Supro®, just to name a few.
Speaker - Jensen® Jets, 10", Falcon, 40W, Ferrite
A very successful and versatile 10”, the Falcon 10 adds a new dimension of openness to the classic, fat and warm tone of its 12” version. The seamed cone membrane delivers an unexpected bass response for its 10” size and it is balanced perfectly with its sweet, yet cutting and present high end.
Speaker - Jensen® MOD®, 8", MOD8-20, 20W
The Mod 8-20 is a 8" ferrite speaker with 20 watts of power. Straightforward tone with smooth highs and more predominant lows. It responds to overdrive distortion with a mellow fuzz overdrive.
Speaker - Jensen® MOD®, 10", MOD10-35, 35W
The Mod 10-35 is a 10" ferrite speaker with 35 watts of power. Warm, straightforward tone and tight bass frequencies. When presented with overdrive distortion, it takes on a gritty edge.
Speaker - Jensen® MOD®, 6", MOD6-15, 15W
The Mod 6-15 is a 6" ferrite speaker with 15 watts of power. It is a good upgrade for small practice amps.
Speaker - Jensen® Vintage Ceramic, 12", C12K, 100W
While not strictly a vintage reissue, the C12K is the first design that Jensen developed in the early ‘90s. It is tonally inspired by the classic vintage ceramic Jensen, but with a substantially stronger voice, full bass and smooth top end. The C12K became one of the speakers of choice for Fender®, used in a myriad of world-selling models. Vintage tone with modern power handling and dynamics are the key virtues of the C12K.
Speaker - Jensen® Vintage Ceramic, 6", C6V, 20W
The smallest ceramic guitar speaker in the Jensen range, the C6V has a smooth tone with rich midrange, excellent detail on the top end, and a convincing bass range for its size. The 20W power handling ensures good headroom, dynamics and articulation, even with mid and high gain tones.
Gaskets - Jensen®, for speaker cabinets
Package of 4Set of speaker gaskets for spacing/protection of your Jensen speaker. These will work in any cabinet, and are especially popular in Leslie cabinets. Four gaskets is enough for one speaker.
Speaker - Jensen® MOD®, 12", MOD12-70, 70W
The Mod 12-70 is a 12" ferrite speaker with 70 watts of power. The MOD12-70 is loud, dynamic, and well defined. It has a defined warm crunch response to overdrive distortion.
Speaker - Jensen® Vintage Alnico, 12", P12R, 25W
The smallest powered AlNiCo 12” in the range, the P12R is the classic choice for the lower powered combo amps of the tweed era. It was very common in Fender®, Epiphone® and Ampeg® amps until the early ‘60s. The P12R is bright and colorful, has excellent cut and sparkle, and breaks up easily.
Speaker - Jensen® Vintage Ceramic, 15", C15K, 100W
The C15K is the contemporary version of the C15N and offers one of the fullest sounding tones in the entire range. With powerful basses, rich in the whole midrange and smooth but extended in the treble range, the C15K is a first choice for traditional jazz players, as well as for fusion and roots rock styles.
Speaker - Jensen® MOD®, 12", MOD12-50, 50W
The Mod 12-50 is a 12" ferrite speaker with 50 watts of power. Warm, well balanced tone with low end focus. It responds to overdrive distortion with a rich smooth crunch and bright lead-voice fuzz.
Speaker - Jensen® Vintage Alnico, 10", P10R for Fender®, 25W, 8Ω
Not a strict reissue, the P10R-F was born as a special edition of the P10R, developed in cooperation with Fender®, for the Custom Shop ’57 BandMasterä and the 20th Anniversary Vibro-Kingä amps. By means of a different cone membrane, the P10R-F has a warmer, ‘aged’ tone, and breaks up in a sweet, progressive manner. A very unique speaker for true Tone-Connoiseurs.
Speaker - Jensen® MOD®, 5", MOD5-30, 30W, 8Ω
The Mod 5-30 is a 5" ferrite speaker with 30 watts of power. It is a great replacement for Trace Elliot amps.
Speaker - Jensen® Jets, 12", Tornado Classic, 100W
The Tornado 100 is the first Jensen Jet speaker loaded with the 2nd Generation Neodymium magnet design that has since been extended to the Tornado Stealth line. The Tornado speakers are voiced similarly to AlNiCo speakers, unlocking their full tone potential. The Tornado 100 is an evenly-balanced speaker: clear, smooth, and well-defined with a solid, powerful bass range. Excellent dynamic range and headroom make the Tornado Classic 100 eminently versatile, from clean to crunch and lead tones. It is designed to suit open back, closed back, and ported cabinets.
Speaker - Jensen® Vintage Alnico, 10", P10Q, 40W, 8 Ω
The high power 10” Alnico in the Vintage Series, the P10Q was used in a handful of beautifully sounding amps such as the Tweed Super, Brownface Super, and others. This speaks to the fierce tone of the P10Q, capable of great clarity, detailed tone with excellent trebles, and well supported by a solid mid and bass foundation.