Radio & Antique Equipment Parts

The 1N34A Germanium diode is an old standby in electronics. Widely used for detecting the rectifying efficiency or for switching on a radio, TV or stereo etc.

#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 105°C temperature rating, 600V. For a solid core version, see: S-W8XL

1 amp, 125VAC, 0.25W, single pole, single throw switched potentiometer. 24mm body.

Assortment of knob springs for 1/2 moon shaft. 3/8" high x 9/32" outside dia. "D" shaped package of 6.

Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. Allows proper dial centering in cabinet opening. Overall dimensions 0.875" dia. x .233" thick.

Premium quality wool felt washers. Medium brown in color, these washers will resist wear and hold their shape over time. Center holes already punched. ¼" inside diameter. Listed diameter is outside diameter. Washer is 1/16" thick.

High impedance crystal earphone - very sensitive and works great with crystal radios. Has 3 a foot cord and miniature (3.5 mm) plug.

18 gauge braided power cord in gold - approximates the look of vintage power cords. 105°C temperature rating, 600V.

Rubber grommets for mounting phonograph motors. 1/2 dia. 5/16" high and ¼" inner dia.

Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. 1/4 inner dia. Allows proper dial centering in cabinet opening. Adhesive backing for lamenating to other washers to increase thickness. Overall dimensions 7/8" dia. x 1/8" thick.

Coil is similar to Miller number 70-OSC oscillator coil. Their small physical size and the fact that they can be adjusted to the inductance required make these coils ideally suited for replacement in broadcast band receivers. The 70 Oscillator coil has a primary and a tapped secondary. These coils are for use in all common padded and unpadded oscillator circuits.

Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. 1/4 inner dia. Allows proper dial centering in cabinet opening. Overall dimensions 1 1/8" dia. x 1/4" thick.

Replacement upper drive belt for Leslie models 122 and 147. This belt is made of a high quality rubber that is both chemical and abrasion resistant ensuring a long life of use. This round belt had a 25.5 in. diameter with no seam to ensure a smooth drive.

New manufacture solid-state replacement 4 pin vibrators. These replace our old line of solid state vibrators. 1-1/2 dia. x 2-¾" high aluminum can. Replace your buffer capacitor when you replace your vibrator!

Replacement upper slow motor assembly for Leslie models 122/147. Overall shaft length is 2.75".

To order a schematic, enter the make and model of your schematic and click the Add to Cart button. Alternatively, you can browse our library of schematics online to find the schematic you're looking for. We have a vast library of schematics and if we have the one you are looking for we'll send it to you. If we do not have what you need, we'll contact you to let you know.

A quick-drying, waterproof clear adhesive which forms a strong, hard, water and vibration-resistant bond with minimal shrinkage. Ideal for speaker repairs and bonding semi-porus materials to each other or to metals, plastics, etc. 2 oz. bottle. Can be used as a glue for small speaker cone repairs.

Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.
Tools are:

• 8282 Zenith type Hex/Screwdriver
• 8606 5" Hex wrench
• 9091 Hex iron core tool
• 9300 5" Double sided hex tool
• 9304 Hex screwdriver combination
• 8608 Potentiometer Adjustment Tool

Right Angle Daisy Chain connector with standard polarity tip negative/barrel positive plugs connects the Power-All® ECO-Dapter® 9 VDC power supply to five effect pedals. The Cable-5/R can also be used with Power-All jumper cables to power effects that use different style jacks (reverse polarity, phone plug, battery clip, etc.). You can also link multiple Cable-5/R connectors to power over twenty 9-volt effect pedals or similar devices (actual number of units depends on current draw of individual units used).

Replacement lower slow motor assembly for Leslie models 122/147. Overall shaft length is 2.75".

Cleans and revitalizes rubber, prolonging life and restoring function.

• Prolongs life of rubber parts
• Deglazes hardened rubber hoses, drive wheels and belts.
• Revitalizes rubber by removing buildup
• Restores the "gripping" surface
• Cleans and makes surfaces like new

Upper slow motor rebuild kit fits Leslie models 122/147. Includes installation instructions.

Removes scratches from acrylic surfaces; significantly reduces haziness. More abrasive than Novus #2 and is effective for deeper scratches. Treatment should be followed by Novus #2 to buff and polish surface.

Lower slow motor rebuild kit for Leslie models 122/147. Includes installation instructions.