Radio & Antique Equipment Parts
Adjustment Tool - Bourns Trimpots, H-90
Bourns trimmer adjustment tool. This tool is compatible with both the R-VT96Y-X multiturn trimmers and the R-VT62P-X single turn trimmers. The recessed end is especially helpful when used with the 3296Y trimmers to avoid slipping off of the screw adjuster. Features
- Meets UL 94V-0
- Pocket clip
- For use on most trimmer shafts/rotors
- Recessed end for use with extended shafts
- RoHS compliant
Aligner tool - GC Electronics, Duplex
Butyrate shaft 6-1/8" long with 1/8" wide steel tips. Tip on one end recessed.
- Material: Conductive Nylon Metal
- End: 1/8"
- End 2: 1/8"
Alignment Kit - GC Electronics, for CB
- 5009 Duplex no-metal screwdriver
- 5097 K-tran tool
- 8271 core aligner
- 8282 Zenith alignment tool
- 9091 hex iron core tool
- 9440 transistor tool
- 8276 Duplex aligner
- 9304 double end tool
Alignment Kit - GC Electronics, for color TVs
Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.
- 8282 Zenith type Hex/Screwdriver
- 8606 5" Hex wrench
- 9091 Hex iron core tool
- 9300 5" Double sided hex tool
- 9304 Hex screwdriver combination
- 8608 Potentiometer Adjustment Tool
Alignment Tool - Zenith-Admiral Hex Wrench
GC Electronics 8606 alignment tool with hex and special tip slug. This tool is made of non-conductive Delrin.
- End 1 - 0.027 in.
- End 2 - 0.1 in.
- End 3 - 0.1 in.
Bearing - Leslie, Lower Rotor, sealed
Sealed lower rotor bearing for Leslies.
Bearing - Leslie, Upper Tension Idler
Sealed upper tension idler bearing for Leslies
Belt - Leslie, 31", Lower Drive, for 122/147, Polyurethane
Replacement lower drive belt for Leslie models 122 and 147. This belt is made of a high quality clear polyurethane that is both chemical and abrasion resistant ensuring a long life of use. This round belt had a 31 in. diameter with a sanded seam to ensure a smooth drive.
Belt - Leslie, Upper Drive, 25.5", for 122/147, Rubber
Replacement upper drive belt for Leslie models 122 and 147. This belt is made of a high quality rubber that is both chemical and abrasion resistant ensuring a long life of use. This round belt had a 25.5 in. diameter with no seam to ensure a smooth drive.
Cable - Power All, 11 Lead Right Angle Daisy Chain
Designed for larger pedalboards, the Power-All Cable-11/R Daisy Chain features ELEVEN right-angle male barrel plugs with spring loaded jacks for extra secure connections – no more losing power mid-solo! 28-gauge cable with oil-resistant sheath and 10-inch cable length between plugs allows connection of larger and odd-sized pedals.
Cable - Power All, 5 Lead Right Angle Daisy Chain
Right Angle Daisy Chain connector with standard polarity tip negative/barrel positive plugs connects the Power-All® ECO-Dapter® 9 VDC power supply to five effect pedals. The Cable-5/R can also be used with Power-All jumper cables to power effects that use different style jacks (reverse polarity, phone plug, battery clip, etc.). You can also link multiple Cable-5/R connectors to power over twenty 9-volt effect pedals or similar devices (actual number of units depends on current draw of individual units used).
Cable - Power All, Black Right Angle Extension Jumper
Included in the PA-9ECD Deluxe Kit and also sold separately, the Cable-Black/R allows the user to power over-sized effect units or units w/AC jacks in hard-to-reach places off of the Power-All Daisy Chain. The Cable-Black can be connected to any plug on any Power-All daisy chain, or directly to the ECO-Dapter® itself.
Cable - Power All, Blue Right Angle Phone Plug Extension Jumper
Included in the PA-9ECD Deluxe Kit and also sold separately, the Cable-Blue/R features a right-angle jack that allows users to power effect units that use a ⅛" (3.5 MM) phone plug connector with tip-positive polarity. The Cable-Blue/R can be connected to any male jack on the Cable-5 Daisy Chain, or directly to the ECO-Dapter® itself.
Cable - Power All, Green Right Angle Line-6 Extension Jumper
Included in the PA-9ECB Basic Kit, PA-9ECD Deluxe Kit, and also available separately, the Cable-Green Right Angle jumper allows the user to power Line-6 Stomp-Box modelers and other digital effect units from the ECO-Dapter®. The Cable-Green features a reverse-polarity (tip positive), right-angle male barrel connector with a larger, 2.5 mm internal diameter and spring-loaded clips. The Cable-Green/R can be used with Line-6 Modelers, Electro-Harmonix units, and other pedals requiring a larger internal diameter plug. the Cable-Green/R can be connected to the male plugs on any Power-All Daisy Chain, or directly to the ECO-Dapter® itself.
Cable - Power All, Grey Battery Snap Jumper
Included in the PA-9ECB Basic Kit and also sold separately, the Cable-Grey allows the user to power vintage and boutique effect units that run off 9-volt batteries but do not have an external AC power jack. The Cable-Grey hooks directly to the unit's Battery Snap and can be connected to any of the Power-All daisy chains, or directly to the Power-All.
Cable - Power All, Red Right Angle Reverse Polarity Jumper
Included in the PA-9ECB Basic Kit, PA-9ECD Deluxe Kit, and also available separately, the Cable-Red/R allows the user to power effect units that have reverse polarity barrel connectors (tip positive/barrel negative). The Cable-Red/R features a tip positive, male barrel connector that is spring-loaded to prevent disconnection. The Cable-Red/R can be hooked to any plug on any of the Power-All daisy chains, or directly to the Power-All.
Cable Cap - Power All, Insulator Caps for Barrel Connectors
Designed to fit over unused male barrel connectors on a daisy chain or power supply, Cable-Caps protect against short circuits that can occur when a live lead touches a metal surface. Sold in sets of three. Fits over standard 5.5 mm diameter barrel plug connectors.
Cement - GC Electronics, Service Cement
A quick-drying, waterproof clear adhesive which forms a strong, hard, water and vibration-resistant bond with minimal shrinkage. Ideal for speaker repairs and bonding semi-porus materials to each other or to metals, plastics, etc. 2 oz. bottle. Can be used as a glue for small speaker cone repairs.
Cleaner - Rubber Revitalizer, 1 oz, for restoration / protection
Cleans and revitalizes rubber, prolonging life and restoring function.
- Prolongs life of rubber parts
- Deglazes hardened rubber hoses, drive wheels and belts.
- Revitalizes rubber by removing buildup
- Restores the "gripping" surface
- Cleans and makes surfaces like new
Diode - 1N34A Germanium
The 1N34A Germanium diode is an old standby in electronics. Widely used for detecting the rectifying efficiency or for switching on a radio, TV or stereo etc.
Earphone - Crystal, 3.5mm, High Impedance
High impedance crystal earphone - very sensitive and works great with crystal radios. Has 3 a foot cord and miniature (3.5 mm) plug.
Fahnestock Clip - electrical terminal for wire connections
Spring clip ¾" long for up to 15 ga. wire. Hole fits U.S. Screw size # 6.
Grommet Kit - All Rubber Parts, for Leslie
Replace deteriorated rubber parts in Leslie cabinets. Includes grommets, o-rings, bushings, plug.