Power Supplies & Accessories

Included in the PA-9ECD Deluxe Kit and also sold separately, the Cable-Black/R allows the user to power over-sized effect units or units w/AC jacks in hard-to-reach places off of the Power-All Daisy Chain. The Cable-Black can be connected to any plug on any Power-All daisy chain, or directly to the ECO-Dapter® itself.

Marshall replacement power board.
Works in the following models:

• AVT50
• AVT100
• AVT150H
• AVT150
• AVT275
• AVT275X

Included in the PA-9ECB Basic Kit, PA-9ECD Deluxe Kit, and also available separately, the Cable-Green Right Angle jumper allows the user to power Line-6 Stomp-Box modelers and other digital effect units from the ECO-Dapter®. The Cable-Green features a reverse-polarity (tip positive), right-angle male barrel connector with a larger, 2.5 mm internal diameter and spring-loaded clips. The Cable-Green/R can be used with Line-6 Modelers, Electro-Harmonix units, and other pedals requiring a larger internal diameter plug. the Cable-Green/R can be connected to the male plugs on any Power-All Daisy Chain, or directly to the ECO-Dapter® itself.

Heavy duty mil-spec barrel plug from Switchcraft. The S10 is a high current, non-sealed power jack with a similar design as the ¼” jacks from Switchcraft. The plug is rated for up to 11A of current.

Fuse kit, fast and slow blow. Contains the following fuses:

• 20x Slo-Blo, 2 Amp F-Z3AG-S2
• 20x Slo-Blo, 3 Amp F-Z3AG-S3
• 20x Slo-Blo, 1 Amp F-Z3AG-S1
• 20x Slo-Blo, 4 Amp F-Z3AG-S4
• 20x Slo-Blo, 5 Amp F-Z3AG-S5
• 20x Fast-Blo, 2.5 Amp F-Z3AG-F2D5
• 20x Fast-Blo, 1 Amp F-Z3AG-F1
• 20x Fast-Blo, 3 Amp F-Z3AG-F3

High quality insulation cover for panel mount fuse holders. The cover is made of a thick durable PVC and fits many fuse holders. The wire sleeve can securely fit over any standard wire gauge used with fuse holders providing a fully insulated fuse connection.
Features

• Provides insulation against shock on rear of fuse holder
• PVC
• UL94V-0 rated flame retardant material

Fits S-H205

The Dunlop 18V power supply for Dunlop effects will save you some money on batteries and get the right power to your pedal! Features Include:

• 18 volts of regulated DC current
• 2.1 mm x 5.5 mm plug with negative center

Compatible Dunlop pedals include:

• Older Crybaby Multi-Wah
• SW-95 Slash Wah
• M108 10-band EQ
• KFK1 10-band EQ
• M117R Flanger
• EVH 117 Flanger
• DD11 Dime Distortion
• M134 Chorus
• M181 Bass Blowtorch

Plus many other pedals requiring an 18vdc power supply!

Korg KA-163E / YP-055 power supply. For use with AM8000R, D8, D12, D16, DL8000R, KARMA, KM2, N1, N1R, N5, N5EX, SP500, TR Series, Triton LE

• Voltage: 9VAC
• Current: 3000mA
• 4 pin connector

Designed for larger pedalboards, the Power-All Cable-11/R Daisy Chain features ELEVEN right-angle male barrel plugs with spring loaded jacks for extra secure connections – no more losing power mid-solo! 28-gauge cable with oil-resistant sheath and 10-inch cable length between plugs allows connection of larger and odd-sized pedals.

Metal finger-protecting guard for P-HFAN.

KA-193 wallwart power supply. For use with PX4, PX4B and PXR4.

• Voltage: 4.5VDC
• Current: 500mA
• Tip positive; Sleeve negative

For use with MS2000, microKONTROL, microKORG, Etribes, DT7, AX1G/B, AX100G, AX1500, GT12, OT12, and PX3/3B.

This AC adapter powers several older models of Dunlop pedals, which required a 3.5 mm, or 1/8”, plug as opposed to the 5.5mm x 2.1mm barrel plug required by current models.

• Voltage: 9VDC
• Current: 200mA
• Tip positive; Sleeve negative

The LoBat™ low battery indicator circuit is designed for use in electric guitars and basses with active pickups and electronics that use 9 volt batteries. Lights when battery voltage is below 7.7V. This early warning notifies the player it's time for a new battery days before tone begins to suffer!

PCB Mount Fuse Cap.

• 1.31” x 0.42”
• Takes GMA sized fuse

Easy to use cable tie gun cuts ties up to 50 lb. tensile. Use this tool to pull ties tightly and then cut the excess length.

Durable heavy duty nylon cable ties. These zip ties are a great way to tidy up project wiring and securing components. Features

• Approved for outdoor use.
• UL Listed 6.6 nylon.
• Locks tightly - Won’t stretch or slide.
• Temperature range from 40° to 180°F.
• 8 inch length
• 40 lb tensile strength

High quality fuse holder used with 3AG type fuse. This fuse holder features a low profile design. This holder used 0.187” (4.8mm) quick connect tabs that can also be soldered to. Mounting nut included. 13.2mm hole required for mounting.