Pedal Parts / DIY

Transistor - BC550 B, TO-92 case, NPN
Low noise transistor for audio frequency amplifier applications.
Please Log In to view prices
Diode - 1N5817, Schottky, High Switching Speed
Schottky diode with low forward voltage drop and high switching speeds.
Please Log In to view prices
Capacitor - 50V, Ceramic Disc, ± 10%
50V ceramic capacitors with 5mm footprints for use in amplifiers, stomp boxes, and any other electronic project. These capacitors are small and should easily fit in any sized project. These also feature 1” lead lengths so they work great for point to point wiring.
Please Log In to view prices
Diode - General purpose rectifier, 1A, 1N400X
A semiconductor device which passes current in the forward direction (from anode to cathode), and blocks current in the opposite direction.
Please Log In to view prices
Transistor - 2N5088, Bipolar, General Purpose
2N5088 NPN Bipolar Junction Transistor in TO-92 package
Please Log In to view prices
IC Socket - Dual in-line package, 2.54mm Pitch, 7.62mm Spacing
IC component sockets for dual in-line package chips (DIP, PDIP, DIL, DIPP.) These sockets feature ladder style cases with tinned stamped and formed connections.
Please Log In to view prices
Please Log In to view prices
Bezel - Cliff, Black for S4 Jack Socket
Genuine Cliff™ replacement bezel for S4 Series jacks. These can be used with any of our Cliff™ jacks using the metal ferrule style nut. Sold individually.
Please Log In to view prices
Transistor - 2N3904, TO-92 case, NPN
General purpose low-power NPN bipolar junction transistor, used frequently in hobbyist electronic projects.
Please Log In to view prices
Capacitor - 500V, Ceramic Disc, ± 10%
Radial ceramic capacitor.
  • Voltage rating: 500VDC
  • Tolerance: ± 10%
Please Log In to view prices
Diode - Zener, 1W, 1N4741A, 1N4748A
A semiconductor device that, above a certain reverse voltage(the zener value) has a sudden rise in current. If forward biased, the diode is an ordinary rectifier. When reverse biased, it exhibits a sharp break in its current-voltage graph. Voltage across the diode remains essentially constant for any further increase of reverse current.
Please Log In to view prices
Op-Amp - LM324, Quad, Low-Power, 14-Pin DIP
Quad low-power opamps in an 14-pin DIP package. The LM324 offers a 1MHz bandwidth and can be powered from a single supply.
Please Log In to view prices
Diode - Fast Recovery, 1A, 600V, 1N4937
A semiconductor device that, above a certain reverse voltage(the zener value) has a sudden rise in current. If forward biased, the diode is an ordinary rectifier. When reverse biased, it exhibits a sharp break in its current-voltage graph. Voltage across the diode remains essentially constant for any further increase of reverse current.
Please Log In to view prices
Op-Amp - TL082, Dual, Wide-Bandwidth, JFET Input, 8-Pin DIP
Dual wide-bandwidth TL082 opamps in an 8-pin DIP package. The TL082 offers a high input impedance and 4MHz bandwidth.
Please Log In to view prices
Capacitor - 2000V, Ceramic Disc, ± 10%
Ceramic disc capacitors rated for up to 2kV, ± 10% tolerance.
Please Log In to view prices
Capacitor - 0.002uF, 1000V, Ceramic Disc, ± 10%
0.002uF ceramic disc capacitor rated for up to 1kV, ± 10% tolerance.
Please Log In to view prices
Capacitor - 100V, Polyester Film Inductive
Package of 5
Polyester film dielectric, aluminum foil electrode, copperply leads and epoxy resin coating in inductive type.
  • Small size, light weight and low cost
  • Dissipation factor is small because the leads are directly welded to electrodes
  • Epoxy resin vacuum-dipped enhances the mechanical strength, humidity resistance
  • 100 volt rating
  • Operating temperature range: -40°C to +85°C.
  • Package of 5
Please Log In to view prices
Bezel / Nut - Cliff, For S4, Combined Nut / Bezel, Black
Genuine Cliff™ replacement combination nut/bezel for S4 Series jacks.
  • 3/8” thread diameter/20 TPI
  • 3/16” thread length
  • 7/16” nut
  • Used on many Marshall amps
  • Matte black finish
  • Sold individually.
Please Log In to view prices
Nut - CTS, 3/8-32, Nickel, for 450 Series Potentiometers
Replacement nut for CTS 450 series potentiometers and others.
  • 3/8-32 threading
  • Sold individually
Please Log In to view prices
Diode - standard recovery rectifier, 3A, 1000V, 1N5408
1N5408 Diode. Lead mounted standard recovery rectifiers are designed for use in power supplies and other applications having need of a device with the following features:
  • High Current to Small Size
  • High Surge Current Capability
  • Low Forward Voltage Drop
Please Log In to view prices
Op-Amp - TL062, Dual, Low-Power, JFET Input, 8-Pin DIP
Dual low power opamps in an 8-pin DIP package. The TL062 offers a high input impedance and 1MHz bandwidth.
Please Log In to view prices
Transistor - 2N3904, TO-92 case, NPN, Lead Free
General purpose low-power NPN bipolar junction transistor, used frequently in hobbyist electronic projects. This version is lead free.
For a lead free 2N3906 see P-Q2N3906-LF.
Please Log In to view prices
Switch Accessory - Mini Toggle Caps
Colors Available:
Rubber caps for mini toggle switches in a variety of colors. These are made for standard sized toggle bats.
Please Log In to view prices
Capacitor - 25V, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 25VDC.
Please Log In to view prices