Pedal Parts / DIY

Potentiometer - Alpha, Linear, Solid Shaft
24 mm carbon composition. 300° rotation. ½" watt, 500VDC rating. Linear taper.
Please Log In to view prices
Op-Amp - TL074, Quad, Low-Noise, JFET Input, 14-Pin DIP
Low noise JFET quad operational amplifier. Incorporates well matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. Features high slew rates, low input bias and offset currents, and low offset voltage temperature coefficients. Features:
  • Wide common-mode and differential voltage range
  • Low input bias and offset current
  • Low noise en = 15 nV/HZ
  • Output short-circuit protection
  • High input impedance JFET input stage
  • Low harmonic distortion: 0.01%
  • Internal frequency compensation
  • Latch up free operation
  • High slew rate: 16 V/us (typical)
Please Log In to view prices
Nut - Dress Nut, Threaded Through, For Mini Toggle Switches
Threaded through dress nuts for use with mini toggle switches. Unlike the other versions of this dress nut, this nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
Please Log In to view prices
Potentiometer - Alpha, Audio, Solid Shaft
24 mm carbon composition. 300° rotation.1/4W, 500VDC rating. Audio taper. ¼" diameter shaft.
Please Log In to view prices
Label - display model info, vintage-style sticker
Vintage style model information label. This label has a line for a model name or number, the serial number, builder name or company, and the build date. This sticker is a great way to provide build info with a professional presentation on the chassis of a pedal or amp.
Please Log In to view prices
Knob - Chicken Head, set screw, brass inset
Colors Available:
  • Fits ¼" Solid Shafts (Set Screw)
  • Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
  • Brass Set Screw and Insert
  • High Quality Plastic
Please Log In to view prices
¼" Jack - PC Mount, switched, mono
Mono input. PC mount terminals. Metal ferrule. Shorting. Similar to S-H901PC-X.
Please Log In to view prices
CMOS - CD4046, Micropower Phase-Locked Loop, 16-Pin DIP
CD4046B CMOS Micropower Phase-Locked Loop (PLL) consists of a low-power, linear voltage-controlled oscillator (VCO) and two different phase comparators having a common signal-input amplifier and a common comparator input. A 5.2-V zener diode is provided for supply regulation if necessary. Features:
  • Very low power consumption: 70 µW (typ.) at VCO fo = 10 kHz, VDD = 5 V
  • Operating frequency range up to 1.4 MHz (typ.) at VDD = 10 V, RI = 5 k
  • Low frequency drift: 0.04%/°C (typ.) at VDD = 10 V
  • Choice of two phase comparators:
    • Exclusive-OR network (I)
    • Edge-controlled memory network with phase-pulse output for lock indication (II)
  • High VCO linearity: <1% (typ.) at VDD = 10 V
  • VCO inhibit control for ON-OFF keying and ultra-low standby power consumption
  • Source-follower output of VCO control input (Demod.
Please Log In to view prices
Capacitor - 50 V, 0.1 µF, Polyester
Polyester Film Capacitor used in MOD® Pedal Kits. Rated at 0.1µF 50V. Tolerance: 10%. Operating temperature: -40 C to +85 C
Please Log In to view prices
Op-Amp - LM1458, Dual, 8-Pin DIP package
LM1458 dual op amp in an 8-pin DIP package. The LM1458 is a general purpose dual operational amplifier. The two amplifiers share a common bias network and power supply leads. Otherwise, their operation is completely independent. Features
  • No Frequency Compensation Required
  • Short-Circuit Protection
  • Wide Common-Mode and Differential Voltage Ranges
  • Low-Power Consumption
  • 8-Lead TO-99 and 8-Lead PDIP
  • No Latch Up When Input Common Mode Range is Exceeded
Please Log In to view prices
Knob - Rogan, PT Series, 2PS, Medium, Skirted, Pointer, Knurled Shaft
High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
  • Height: 0.84 in.
  • Diameter: 0.62 in.
  • Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K282PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer
Please Log In to view prices
Switch - GØRVA, Submini Toggle, SPDT, 2 Position, PC Pins, Medium Bat
Premium two position SPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details
  • 5.59mm non-threaded bushing
  • 2-Position On/On
  • 4.95mm panel hole diameter
  • Single pole/Double throw (SPDT)
  • PC Pins

Features
  • Power Rating: DC9V, 1A
  • Contact Resistance: <20mΩ
  • Insulation Resistance: 1000MΩ Minimum
  • Dielectric Strength: 1000V RMS @ Sea Level
  • Operating Temperature: -40°C ~ +85°C
  • Electrical Life: 30,000 Cycles
  • RoHS & Lead-free
Please Log In to view prices
Knob - Rogan, PT Series, 1P, Small, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.55 in.
  • Diameter: 0.45 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K271P-W. A variety of different sizes are available from the PT Series.
Please Log In to view prices
Knob - Rogan, PT Series, 1PS, Small, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.71 in.
  • Diameter:0.57 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K271PS-W. A variety of different sizes are available from the PT Series.
Please Log In to view prices
Potentiometer - GØRVA, Audio, 16mm, Solder Lug, Solid Shaft
High-quality solder lug audio taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
  • Solder lug / panel mount
  • Audio taper
  • +/- 10% tolerance
  • ¼” (6.35mm) solid shaft
  • Machine-pressed dust seal
  • High quality wiper material
  • Low residual resistance

For linear taper solder lug pots see R-VGORVA-BX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
Please Log In to view prices
Knob - Rogan, PT Series, 2S, Medium, Skirted, D-Shaft
High-quality USA made knobs from Rogan Corp. These medium, skirted knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.84 in.
  • Diameter: 0.62 in.
  • Fits 6mm D Shafts
  • No indicator

A variety of different sizes are available from the PT Series.
Please Log In to view prices
Knob - Plastic, Set Screw, Skirted w/ Arrow, 1.12" Diameter
Colors Available:
New!:
Large black plastic control knob with set screw and brass insert. The two different options include one version with a black plastic top and another version with a radial-brushed metal cap with a chamfered edge, each sold separately. The grip has a smooth straight knurl and the skirt features an arrow indicator. Fits ¼” (6.35mm) pot shafts.
Please Log In to view prices
Knob - Rogan, PT Series, 1P, Small, Pointer, Knurled Shaft
High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
  • Height: 0.55 in.
  • Diameter: 0.45 in.
  • Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K281P-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer
Please Log In to view prices
Potentiometer - Alpha, Audio, Knurled Shaft, 16mm
Miniature Alpha pot for guitars. Audio taper.
Please Log In to view prices
Knob - Set Screw, Marshall Style, black base
Cap Colors Available:
High quality Marshall style knobs with set screws. These knobs are available with the classic gold and silver top caps as well as an all black version. These knobs use a slotted set screw and fit 1/4 in. (6.35mm) pot shafts. 0.77" diameter x 0.62" tall.
Please Log In to view prices
Turret Strip - 13 Lugs, Single Row, U-style
Single row of 13 U-style terminals on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.
Please Log In to view prices
Knob - Rogan, PT Series, 2P, Medium, Pointer, Knurled Shaft
High-quality USA made knobs from Rogan Corp. These medium pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
  • Height: 0.68 in.
  • Diameter: 0.50 in.
  • Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K282P-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272PS-W 2PS Medium Skirted Pointer
Please Log In to view prices
Knob - Rogan, PT Series, 1S, Small, Skirted, D-Shaft
Colors Available:
High-quality USA made knobs from Rogan Corp. These small, skirted knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.71 in.
  • Diameter: 0.57 in.
  • Fits 6mm D Shafts
  • No indicator

A variety of different sizes are available from the PT Series.
Please Log In to view prices
Knob - Rogan, PT Series, 2P, Medium, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These medium pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.68 in.
  • Diameter: 0.50 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K272P-W. A variety of different sizes are available from the PT Series.
Please Log In to view prices