Pedal Parts / DIY

Solder terminals, non-switched. Used in many vintage pedals and amplifiers. For the switched version, see S-H902-X. Features:

• Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
• Tough, molded grade 1 black Nylon body.
• Made in the U.K.
• Supplied with a black nylon hexagonal mounting nut
• Designed to receive both mono and stereo ¼" jack plugs
• Withstand Voltage: 2000VDC Min.
• Maximum Current: 5A
• Temperature Rating: -10°C ~ +70°C
• Life (Minimum): 10,000+ Operations
• Nominal Contact Resistance: < 50 mΩ

EMI / RFI screen (grounding washer) for S2 and S4 Cliff jack sockets. This lock washer is added to S2/S4 Cliff jacks to provide a chassis/shield connection for the connection. Jacks sold separately.

Genuine Cliff™ replacement bezel for S4 Series jacks. These can be used with any of our Cliff™ jacks using the metal ferrule style nut. Sold individually.

Solder terminals, non-switched. Metal ferrule, vintage style found in many amplifiers and pedals. For the switched version, see S-H901-X. Features:

• Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
• Tough, molded grade 1 black Nylon body.
• Made in the U.K.
• Supplied with a metal hexagonal mounting nut
• Designed to receive both mono and stereo ¼" jack plugs
• Withstand Voltage: 2000VDC Min.
• Maximum Current: 5A
• Temperature Rating: -10°C ~ +70°C
• Life (Minimum): 10,000+ Operations
• Nominal Contact Resistance: < 50 mΩ

Genuine Cliff ferrule for internal thread S4 jacks (3/8-20). This matte black ferrule works great with the S-H960-X washers to provide a unique look for inputs on amplifiers, pedals, and other equipment.

Slotted dress nut for ⅜”-32 threaded bushing such as standard Switchcraft ¼” jacks and CTS potentiometers. These plated brass nuts add a sleek look to any amplifier, pedal or guitar. This style of nut has a similar look to slotted round nuts found on plexi Marshall amps.

Switchcraft shouldered hex nuts for ⅜”-32 UNEF-2A threaded bushings. These nuts include a rubber grommet for use in sealed systems and also add a unique look to any build such as pedals or amplifiers. The large nut (W-SC-DRESS-1) is intended for panel or chassis thicknesses of 0.05” through 0.09”. The small nut (W-SC-DRESS-2) is intended for panel or chassis thicknesses of 0.095” through 0.125”. Rubber grommet included.

R/A stereo jack. Replacement for Fender amps 1999-present. Similar to Fender part: 005-3450-000

Stereo, insulated, plastic bushing, bushing length = 0.29". Please note that this does not include nuts or washers. Please see parts S-HRVNT, S-HRVLW, and R-VNUT-38 if you require them.

1/4" enclosed jack, switched, with chrome ferrule and straight PCB pins, mounting nut included. Wide body and extremely durable contacts.

The Switchcraft Type 112BX enclosed ¼” jack is a high quality jack. This jack has three solder lugs. One for the tip, one for the ring, and one for the sleeve. These jacks have been widely used across the industry and can also be found in many popular 5U synthesizers. Includes nut and washer.

• Type 112BX
• 0.276" bushing length (standard)
• Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing.
• Stereo 3-Conductor
• Includes nut and washer

See W-SC-111X for mono version

Solder terminals, switched. Used in modern Marshall amps. Features: Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability, tough, molded grade 1 black Nylon body.

12 ½" mm, stereo, insulated, PC mount, bushing length = 0.29".

3 pole open 1/4" jack, 3 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205" faston tabs

PCB Mount stereo jacks with a very low profile. These jacks have a smaller footprint than the Lumberg jacks that are popular for tight pedal builds. They are perfect for top mounted jack pedal builds and any other project where space is limited. Mounting nut and flat washer included.

• M9*0.75 Bushing Thread
• Stereo 3-Conductor (TRS)
• Open Circuit (does not have switched terminal).
• Includes nut and washer.

Solder terminals, switched. Metal ferrule, vintage style.
Features:

• Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
• Tough, molded grade 1 black Nylon body.
• Made in the U.K.
• Supplied with a metal hexagonal mounting nut
• Designed to receive both mono and stereo 1/4" jack plugs

Withstand Voltage: 2000VDC Min. Maximum Current: 5A Temperature Rating: -10°C ~ +70°C Life (Minimum): 10,000+ Operations Nominal Contact Resistance: < 50 mΩ

Mono input. Solder lugs, shorting. Metal ferrule, vintage style. Similar to S-H901-X.

Horizontal 1/4" jack, all contacts switched, plastic housing with nut and washer, solder tap version

Stereo jack for Dunlop effects pedals. Original Dunlop replacement part. Though hole PCB mount with six pins.

Mono input jack. 4 solder terminals, switched. Used in modern Marshall amps.

Switchcraft Type 11 Little-Jax phone jack. Mono 2-conductor, open circuit. Mates with standard ¼" plugs and is available with standard or long bushings. Great replacement for Fender® guitar & amp input jacks.

Horizontal 1/4" jack, all contacts switched, chrome ferrule nut

Fender® Style ¼" Mono Input Jack with 4 PCB Terminals.

Cliff UK 1/4" white jack. External threading: 7/16-20. Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability. Tough, molded Nylon body.