Op-Amp - LM358, Dual, 8-Pin DIP package

Op-Amp - LM358, Dual, 8-Pin DIP package

Op-Amp - LM358, Dual, 8-Pin DIP package image 1
Click to zoom in
In Stock

LM358 dual op amp in an 8-pin DIP package. These devices consist of two independent, high-gain, frequency-compensated operational amplifiers designed to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2904), and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.

Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational amplifier circuits that now can be implemented more easily in single-supply-voltage systems. For example,these devices can be operated directly from the standard 5-V supply used in digital systems and easily can provide the required interface electronics without additional ±5-V supplies.


  • Wide Supply Range:
    • Single Supply...3 V to 32 V
    • or Dual Supplies . . .+1.5 V to +16 V
  • Low Supply-Current Drain, Independent of Supply Voltage. . . 0.7 mA Typ
  • Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground
  • Low Input Bias and Offset Parameters:
    • Input Offset Voltage...3 mV Typ
    • Input Offset Current...2 nA Typ
    • Input Bias Current. . . 20 nA Typ
  • Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage...32 V
  • Open-Loop Differential Voltage Amplification. . . 100 V/mV Typ
  • Internal Frequency Compensation
Product Measurements by Type
CMRR - Common Mode Rejection Ratio80 dB:
Dual Supply Voltage+/- 3 V, +/- 5 V, +/- 9 V:
GBP - Gain Bandwidth Product700 kHz:
Ib - Input Bias Current250 nA:
Maximum Dual Supply Voltage+/- 16 V:
Maximum Operating Temperature+ 70 C:
Minimum Dual Supply Voltage+/- 1.5 V:
Minimum Operating Temperature0 C:
Number of Channels2 Channel:
Operating Supply Current350 uA:
Operating Supply Voltage3 V to 32 V, +/- 1.5 V to +/- 16 V:
Output Current per Channel20 mA:
SR - Slew Rate300 mV/us:
Supply Voltage - Max32 V:
Supply Voltage - Min3 V:
Vcm - Common Mode VoltageNegative Rail to Positive Rail - 1.5 V:
Voltage Gain dB100 dB
Vos - Input Offset Voltage7 mV:
en - Input Voltage Noise Density40 nV/sqrt Hz:
Packaging Information
Packaging Dimensions0.382 in. × 0.32 in. × 0.28 in.
Weight (Packaging)0.0022 lbs.
PDF: DatasheetAll Models

My Project Lists

You must be logged in to add items to a project list.

Specifications, Files, and Documents

PDF: Datasheet Datasheet4.16 MB