New Products

High quality potentiometers from AxLabs. These audio taper pots feature a ¼” bushing and a ¼” (6.35mm) solid shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.

High quality potentiometers from AxLabs. These linear taper pots feature a ⅜” bushing and ¼” (6.35mm) solid shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.

High quality potentiometers from AxLabs. These audio taper pots feature a ¼” bushing and coarse (T18) knurled shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.

High quality potentiometers from AxLabs. These audio taper pots feature a ⅜” bushing and a ¼” (6.35mm) solid shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.

High quality potentiometers from AxLabs. These linear taper pots feature a ¼” bushing and coarse (T18) knurled shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.

High quality potentiometers from AxLabs. These linear taper pots feature a ⅜” bushing and coarse (T18) knurled shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.

High quality metal film resistors from Vishay / BC Components. PR03 resistors are rated for 3W but have a compact 5.2x19.5mm package. These resistors look great in vintage and vintage-style builds and have been used in high-end Marshall amplifiers and other audio equipment. Construction: A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper or copper-clad iron are welded to the end-caps. The resistors are coated with a red, non-flammable lacquer which provides electrical, mechanical and climatic protection. This coating is not resistant to aggressive fluxes and cleaning solvents.

High quality metal film resistors from Vishay / BC Components. PR02 resistors are rated for 2W but have a compact 3.9x12mm package. These resistors look great in vintage and vintage-style builds and have been used in high-end Marshall amplifiers and other audio equipment. Construction: A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper or copper-clad iron are welded to the end-caps. The resistors are coated with a red, non-flammable lacquer which provides electrical, mechanical and climatic protection. This coating is not resistant to aggressive fluxes and cleaning solvents.

High quality metal film resistors from Vishay / BC Components. PR01 resistors are rated for 1W but have a compact 2.5x8mm package. These resistors look great in vintage and vintage-style builds and have been used in high-end Marshall amplifiers and other audio equipment. Construction: A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper or copper-clad iron are welded to the end-caps. The resistors are coated with a red, non-flammable lacquer which provides electrical, mechanical and climatic protection. This coating is not resistant to aggressive fluxes and cleaning solvents.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.

• 50µF@500V, 50µF@500V
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 55°C Temperature Rating.
• 1 ⅜"D X 2 1”H.

All CE Manufacturing can capacitors have a two year warranty against manufactured defects.

Pre-drilled vintage style pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original Burns Buzzaround enclosures and is pre-drilled to match the original layout of the Buzzaround pedal. The hammered dark gray powder coat provides a close match for the original appearance but will hold up much better than the paint found on the vintage pedals.

Marshall style back corner made of black plastic with a satin surface. These corners feature ¾" radius for the outer edge and a 90° angle for the flat back edge. These corners are a great option for amplifier cabinets and other equipment. Similar to the genuine Marshall back corners P-H1090.

Valvo brand OC45 PNP germanium transistors. The OC45 is a popular PNP for fuzz pedals and boost effects. This transistor is in a glass SO-2 package with long leads commonly found on germanium transistors. The dot indicates the collector lead.

OC43 PNP germanium transistors. The OC43 is a popular PNP for fuzz pedals and boost effects. This transistor is in a glass SO-2 package with long leads commonly found on germanium transistors. The dot indicates the collector lead.

Adzam (Mazda) brand OC45 PNP germanium transistors. The OC45 is a popular PNP for fuzz pedals and boost effects. This transistor is in a glass SO-2 package with long leads commonly found on germanium transistors. The dot indicates the collector lead.

A custom version of the JJ 6V6-S with a double top mica for increased stability. The double mica improves support for the tube structure and reduces mechanical vibrations in its components. These double mica 6V6 tubes are a great option for combo amps and any amplifiers exposed to speaker vibrations. The JJ Electronic 6V6S is another modern classic from JJ. This 6V6 has the standard rugged construction we’ve come to expect from JJ which allows it to handle much higher plate voltages than the typical 6V6 tube. The JJ 6V6 can even be used in place of a 6L6 in some amplifiers. Overall this tube has a warm and balanced tone with incredible separation and response. The highs come in clean and smooth with a lot of clarity. The mids are full and distinctive. The lows are fat and punchy. These tubes can cover a spectrum of sounds and styles all within the same amplifier.

Tapered rubber feet with 3M self-adhesive backing. These square feet have a ½” length and width and can be used to provide grip and slight elevation (0.25") when secured to most project enclosures. Great for effects pedals and rack mount units when removed from the rack. See P-H12R-X for round feet.

Tapered rubber feet with 3M self-adhesive backing. These round feet have a ½” diameter and can be used to provide grip and slight elevation (0.15") when secured to most project enclosures. Great for effects pedals and rack mount units when removed from the rack.

Marshall style back corner made of black plastic with a textured surface. These corners feature ¾" radius for the outer edge and a 90° angle for the flat back edge. These corners are a great option for amplifier cabinets and other equipment. Similar to the genuine Marshall back corners P-H1090.

The Gorva C65 is a high quality powder-coated take on the Hammond 125B size enclosure with a focus on function and design. Features:

• Hammerted Blue powdercoat
• Slightly beveled top and rounded corners for high quality look.
• Tight fit and small gap between the enclosure and lid.
• Undercut boss allows more internal room for more flexible layout.
• Smooth, eggshell-like matte powder coating.
• Recessed bottom lid

Part of a limited run of hammered blue enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BLU 1590N1 / 125B P-H1590N1CE-HMT-BLU C65 (Gorva) P-H1590N1-GORVA-HMT-BLU S90 (Gorva) P-H1590BB-GORVA-HMT-BLU YY P-H-YY-HMT-BLU 1590TRPD Trapezoid P-H1590TRPB-HMT-BLU

Black textured plastic knobs with orange infilled indicator lines similar to the original knobs found on Roland TR-808 drum machines.These knobs feature a straight knurled grip. The large and medium sizes both have a skirt with a notched indicator. All sizes fit 6mm T18 knurled pot shafts.

Corner made of black plastic with a matte surface. These corners feature ⅜” radius and two mounting holes. These corners are a great option for amplifier cabinets and other equipment.

Marshall style front corner made of black plastic with a satin surface. These corners feature ¾" radius and three mounting holes. These corners can be used on both straight and slanted cabinets. These corners are a great option for amplifier cabinets and other equipment.
Similar to the genuine Marshall front corners P-H1091.

Short trapezoid shaped Hammond enclosure in a hammered blue powdercoat. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:

• Hammered blue powdercoat
• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.